From: Simon Glass Date: Sun, 10 May 2020 20:16:56 +0000 (-0600) Subject: bdinfo: arm: Move ARM-specific info into its own file X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=59b0d7d839f135bc44d3459784337a657149f8b3;p=u-boot.git bdinfo: arm: Move ARM-specific info into its own file We don't really want to have ARM-specific code in a generic file. Create a new arch-specific function to hold it, and move it into that. Make the function weak so that any arch can implement it. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index b839aa7a50..27b12e7f2b 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o obj-$(CONFIG_SEMIHOSTING) += semihosting.o +obj-y += bdinfo.o obj-y += sections.o obj-y += stack.o ifdef CONFIG_CPU_V7M diff --git a/arch/arm/lib/bdinfo.c b/arch/arm/lib/bdinfo.c new file mode 100644 index 0000000000..81c9291584 --- /dev/null +++ b/arch/arm/lib/bdinfo.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * ARM-specific information for the 'bd' command + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +void arch_print_bdinfo(void) +{ + bd_t *bd = gd->bd; + + bdinfo_print_num("arch_number", bd->bi_arch_number); +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) { + bdinfo_print_num("Secure ram", + gd->arch.secure_ram & + MEM_RESERVE_SECURE_ADDR_MASK); + } +#endif +#ifdef CONFIG_RESV_RAM + if (gd->arch.resv_ram) + bdinfo_print_num("Reserved ram", gd->arch.resv_ram); +#endif +#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) + bdinfo_print_num("TLB addr", gd->arch.tlb_addr); +#endif + bdinfo_print_num("irq_sp", gd->irq_sp); /* irq stack pointer */ + bdinfo_print_num("sp start ", gd->start_addr_sp); + /* + * TODO: Currently only support for davinci SOC's is added. + * Remove this check once all the board implement this. + */ +#ifdef CONFIG_CLOCKS + printf("ARM frequency = %ld MHz\n", bd->bi_arm_freq); + printf("DSP frequency = %ld MHz\n", bd->bi_dsp_freq); + printf("DDR frequency = %ld MHz\n", bd->bi_ddr_freq); +#endif +#ifdef CONFIG_BOARD_TYPES + printf("Board Type = %ld\n", gd->board_type); +#endif +#if CONFIG_VAL(SYS_MALLOC_F_LEN) + printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr, + CONFIG_VAL(SYS_MALLOC_F_LEN)); +#endif +} diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index 4fadfd2ac7..6aa23e6a43 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -67,6 +67,10 @@ void __weak board_detail(void) /* Please define board_detail() for your PPC platform */ } +__weak void arch_print_bdinfo(void) +{ +} + int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { bd_t *bd = gd->bd; @@ -74,8 +78,6 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) #ifdef DEBUG bdinfo_print_num("bd address", (ulong)bd); #endif - if (IS_ENABLED(CONFIG_ARM)) - bdinfo_print_num("arch_number", bd->bi_arch_number); bdinfo_print_num("boot_params", (ulong)bd->bi_boot_params); print_bi_dram(bd); bdinfo_print_num("memstart", (ulong)bd->bi_memstart); @@ -98,44 +100,11 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO) bdinfo_print_num("FB base ", gd->fb_base); #endif - - /* This section is used only by ARM */ -#ifdef CONFIG_ARM -#ifdef CONFIG_SYS_MEM_RESERVE_SECURE - if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) { - bdinfo_print_num("Secure ram", - gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK); - } -#endif -#ifdef CONFIG_RESV_RAM - if (gd->arch.resv_ram) - bdinfo_print_num("Reserved ram", gd->arch.resv_ram); -#endif -#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) - bdinfo_print_num("TLB addr", gd->arch.tlb_addr); -#endif - bdinfo_print_num("irq_sp", gd->irq_sp); /* irq stack pointer */ - bdinfo_print_num("sp start ", gd->start_addr_sp); - /* - * TODO: Currently only support for davinci SOC's is added. - * Remove this check once all the board implement this. - */ -#ifdef CONFIG_CLOCKS - printf("ARM frequency = %ld MHz\n", gd->bd->bi_arm_freq); - printf("DSP frequency = %ld MHz\n", gd->bd->bi_dsp_freq); - printf("DDR frequency = %ld MHz\n", gd->bd->bi_ddr_freq); -#endif -#ifdef CONFIG_BOARD_TYPES - printf("Board Type = %ld\n", gd->board_type); -#endif -#if CONFIG_VAL(SYS_MALLOC_F_LEN) - printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr, - CONFIG_VAL(SYS_MALLOC_F_LEN)); -#endif #if CONFIG_IS_ENABLED(MULTI_DTB_FIT) bdinfo_print_num("multi_dtb_fit", (ulong)gd->multi_dtb_fit); #endif -#endif /* CONFIG_ARM */ + + arch_print_bdinfo(); /* This section is used only by ppc */ #if defined(CONFIG_MPC8xx) || defined(CONFIG_E500) @@ -170,7 +139,7 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) /* The rest are used only by m68k */ #ifdef CONFIG_M68K #if defined(CONFIG_SYS_MBAR) - print_num("mbar", bd->bi_mbar_base); + bdinfo_print_num("mbar", bd->bi_mbar_base); #endif bdinfo_print_mhz("cpufreq", bd->bi_intfreq); if (IS_ENABLED(CONFIG_PCI)) diff --git a/include/init.h b/include/init.h index af4deed566..e727031514 100644 --- a/include/init.h +++ b/include/init.h @@ -267,6 +267,9 @@ void bdinfo_print_num(const char *name, ulong value); /* Print a clock speed in MHz */ void bdinfo_print_mhz(const char *name, unsigned long hz); +/* Show arch-specific information for the 'bd' command */ +void arch_print_bdinfo(void); + #endif /* __ASSEMBLY__ */ /* Put only stuff here that the assembler can digest */