From: Jonas Karlman Date: Tue, 17 Sep 2024 20:59:17 +0000 (+0000) Subject: regulator: rk8xx: Fix buck get and set enabled state on RK806 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=596465138175cd7e4171cad1e68a2ef7c5c002bc;p=u-boot.git regulator: rk8xx: Fix buck get and set enabled state on RK806 Wrong POWER_EN reg is used to get and set enabled state for the RK806 buck 4 and 8 regulators, also wrong POWER_SLP_EN0 bit is used for suspend state for the RK806 buck 1-8 regulators. Fix this by not adding one to the zero based buck variable. Fixes: f172575d92cd ("power: rk8xx: add support for RK806") Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang Reviewed-by: Quentin Schulz --- diff --git a/drivers/power/regulator/rk8xx.c b/drivers/power/regulator/rk8xx.c index 34e61511d8..b910943c2c 100644 --- a/drivers/power/regulator/rk8xx.c +++ b/drivers/power/regulator/rk8xx.c @@ -415,7 +415,7 @@ static int _buck_set_enable(struct udevice *pmic, int buck, bool enable) break; case RK806_ID: value = RK806_POWER_EN_CLRSETBITS(buck % 4, enable); - en_reg = RK806_POWER_EN((buck + 1) / 4); + en_reg = RK806_POWER_EN(buck / 4); ret = pmic_reg_write(pmic, en_reg, value); break; case RK808_ID: @@ -494,7 +494,7 @@ static int _buck_get_enable(struct udevice *pmic, int buck) break; case RK806_ID: mask = BIT(buck % 4); - ret = pmic_reg_read(pmic, RK806_POWER_EN((buck + 1) / 4)); + ret = pmic_reg_read(pmic, RK806_POWER_EN(buck / 4)); break; case RK808_ID: case RK818_ID: @@ -544,7 +544,7 @@ static int _buck_set_suspend_enable(struct udevice *pmic, int buck, bool enable) mask = BIT(buck + 1 - 3); } else { reg = RK806_POWER_SLP_EN0; - mask = BIT(buck + 1); + mask = BIT(buck); } ret = pmic_clrsetbits(pmic, reg, mask, enable ? mask : 0); } @@ -595,7 +595,7 @@ static int _buck_get_suspend_enable(struct udevice *pmic, int buck) mask = BIT(buck + 1 - 3); } else { reg = RK806_POWER_SLP_EN0; - mask = BIT(buck + 1); + mask = BIT(buck); } val = pmic_reg_read(pmic, reg); }