From: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Date: Thu, 20 Aug 2020 10:51:38 +0000 (-0600)
Subject: configs: xilinx: Enable configs required for ubifs
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=592ac773428a868a8ed4165f4b8a49afccea3919;p=u-boot.git

configs: xilinx: Enable configs required for ubifs

Enable required configs for using ubifs in uboot.

UBIFS testing procedure from u-boot:
Let's say we have two partitions in dt as below and want to format
partition1 "images" with ubifs.

	partition@0 {
		label = "boot";
		reg = <0x0 0x1000000>;
	};

	partition@1 {
		label = "images";
		reg = <0x1000000 0x7000000>;
	};

We will format the partition from linux and copy some files and access
from uboot later.
First thing, in linux config disable CONFIG_MTD_SPI_NOR_USE_4K_SECTORS.
this is required as ubifs expects min LEB size as 15*1024 bytes.

Use below commands in linux to format "images" partition with ubifs.

ubiformat /dev/mtd1
ubiattach /dev/ubi_ctrl -m 1
ubimkvol /dev/ubi0 -N images -m
mount -t ubifs ubi0:images /mnt

We can copy files to /mnt and unmount it.

To access this ubifs partition from uboot, run below commands.
(Don't forget to probe device before, e.g. sf probe 0 0 0)

setenv mtdids "nor0=nor0"
setenv mtdparts "mtdparts=nor0:16m(boot),112m(images)"
ubi part images
ubifsmount ubi0:images

make sure we match "mtdparts" to whatever is given in dt w.r.t partition
sizes.

"mtdparts" command will list the mtd partitions in u-boot.

Once ubifs is mounted, we can use "ubifsls" to list the files in that
partition and use "ubifsload <addr> <filename>" to load files from ubifs
partition to DDR.

Reading information about mtd layout from DT is not supported.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index 4c463f48ee..f9edc72717 100644
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -25,12 +25,15 @@ CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
 CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
 CONFIG_OF_BOARD=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
@@ -64,6 +67,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_MARVELL=y
 CONFIG_PHY_NATSEMI=y
 CONFIG_PHY_REALTEK=y
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index a0984c8045..00a53f36e4 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -107,6 +107,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_MARVELL=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y