From: Tom Rix Date: Thu, 2 Apr 2009 03:02:20 +0000 (-0500) Subject: OMAP3 Fix multiline formatting in board init files. X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=5891151707ee5902fe62d554c247f42865815757;p=u-boot.git OMAP3 Fix multiline formatting in board init files. Signed-off-by: Tom Rix --- diff --git a/board/omap3/beagle/beagle.c b/board/omap3/beagle/beagle.c index 8d6065196f..cc8e2f9a48 100644 --- a/board/omap3/beagle/beagle.c +++ b/board/omap3/beagle/beagle.c @@ -38,10 +38,10 @@ static int beagle_revision_c; -/****************************************************************************** +/* * Routine: board_init * Description: Early hardware init. - *****************************************************************************/ + */ int board_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -55,23 +55,23 @@ int board_init(void) return 0; } -/****************************************************************************** +/* * Routine: beagle_get_revision * Description: Return revision of the BeagleBoard this code is running on. * If it is a revision Ax/Bx board, this function returns 0, * on a revision C board you will get a 1. - *****************************************************************************/ + */ int beagle_get_revision(void) { return beagle_revision_c; } -/****************************************************************************** +/* * Routine: beagle_identify * Description: Detect if we are running on a Beagle revision Ax/Bx or * Cx. This can be done by GPIO_171. If this is low, we are * running on a revision C board. - *****************************************************************************/ + */ void beagle_identify(void) { gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE; @@ -92,10 +92,10 @@ void beagle_identify(void) } } -/****************************************************************************** +/* * Routine: misc_init_r * Description: Configure board specific parts - *****************************************************************************/ + */ int misc_init_r(void) { gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE; @@ -121,12 +121,12 @@ int misc_init_r(void) return 0; } -/****************************************************************************** +/* * Routine: set_muxconf_regs * Description: Setting up the configuration Mux registers specific to the * hardware. Many pins need to be moved from protect to primary * mode. - *****************************************************************************/ + */ void set_muxconf_regs(void) { MUX_BEAGLE(); diff --git a/board/omap3/evm/evm.c b/board/omap3/evm/evm.c index 3a27c8fe5d..c008c2e4aa 100644 --- a/board/omap3/evm/evm.c +++ b/board/omap3/evm/evm.c @@ -36,10 +36,10 @@ #include #include "evm.h" -/****************************************************************************** +/* * Routine: board_init * Description: Early hardware init. - *****************************************************************************/ + */ int board_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -53,10 +53,10 @@ int board_init(void) return 0; } -/****************************************************************************** +/* * Routine: misc_init_r * Description: Init ethernet (done here so udelay works) - *****************************************************************************/ + */ int misc_init_r(void) { @@ -73,22 +73,22 @@ int misc_init_r(void) return 0; } -/****************************************************************************** +/* * Routine: set_muxconf_regs * Description: Setting up the configuration Mux registers specific to the * hardware. Many pins need to be moved from protect to primary * mode. - *****************************************************************************/ + */ void set_muxconf_regs(void) { MUX_EVM(); } -/****************************************************************************** +/* * Routine: setup_net_chip * Description: Setting up the configuration GPMC registers specific to the * Ethernet hardware. - *****************************************************************************/ + */ static void setup_net_chip(void) { gpio_t *gpio3_base = (gpio_t *)OMAP34XX_GPIO3_BASE; diff --git a/board/omap3/overo/overo.c b/board/omap3/overo/overo.c index 37bf350e4e..809b77b642 100644 --- a/board/omap3/overo/overo.c +++ b/board/omap3/overo/overo.c @@ -35,10 +35,10 @@ #include #include "overo.h" -/****************************************************************************** +/* * Routine: board_init * Description: Early hardware init. - *****************************************************************************/ + */ int board_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -52,10 +52,10 @@ int board_init(void) return 0; } -/****************************************************************************** +/* * Routine: misc_init_r * Description: Configure board specific parts - *****************************************************************************/ + */ int misc_init_r(void) { power_init_r(); @@ -65,12 +65,12 @@ int misc_init_r(void) return 0; } -/****************************************************************************** +/* * Routine: set_muxconf_regs * Description: Setting up the configuration Mux registers specific to the * hardware. Many pins need to be moved from protect to primary * mode. - *****************************************************************************/ + */ void set_muxconf_regs(void) { MUX_OVERO(); diff --git a/board/omap3/pandora/pandora.c b/board/omap3/pandora/pandora.c index dfd51ecfcb..c2f98ead6a 100644 --- a/board/omap3/pandora/pandora.c +++ b/board/omap3/pandora/pandora.c @@ -36,10 +36,10 @@ #include #include "pandora.h" -/****************************************************************************** +/* * Routine: board_init * Description: Early hardware init. - *****************************************************************************/ + */ int board_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -53,10 +53,10 @@ int board_init(void) return 0; } -/****************************************************************************** +/* * Routine: misc_init_r * Description: Configure board specific parts - *****************************************************************************/ + */ int misc_init_r(void) { gpio_t *gpio1_base = (gpio_t *)OMAP34XX_GPIO1_BASE; @@ -82,12 +82,12 @@ int misc_init_r(void) return 0; } -/****************************************************************************** +/* * Routine: set_muxconf_regs * Description: Setting up the configuration Mux registers specific to the * hardware. Many pins need to be moved from protect to primary * mode. - *****************************************************************************/ + */ void set_muxconf_regs(void) { MUX_PANDORA(); diff --git a/board/omap3/zoom1/zoom1.c b/board/omap3/zoom1/zoom1.c index 702f732753..db4d08709f 100644 --- a/board/omap3/zoom1/zoom1.c +++ b/board/omap3/zoom1/zoom1.c @@ -37,10 +37,10 @@ #include #include "zoom1.h" -/****************************************************************************** +/* * Routine: board_init * Description: Early hardware init. - *****************************************************************************/ + */ int board_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -54,10 +54,10 @@ int board_init(void) return 0; } -/****************************************************************************** +/* * Routine: misc_init_r * Description: Configure zoom board specific configurations - *****************************************************************************/ + */ int misc_init_r(void) { power_init_r(); @@ -65,12 +65,12 @@ int misc_init_r(void) return 0; } -/****************************************************************************** +/* * Routine: set_muxconf_regs * Description: Setting up the configuration Mux registers specific to the * hardware. Many pins need to be moved from protect to primary * mode. - *****************************************************************************/ + */ void set_muxconf_regs(void) { /* platform specific muxes */