From: Masahiro Yamada Date: Mon, 31 Mar 2014 03:59:58 +0000 (+0900) Subject: board: esd: remove remainders of dead boards X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=585cd86c78d291f291a8c153f69298d7b9345609;p=u-boot.git board: esd: remove remainders of dead boards Commit 99bcad18 deleted ADCIOP and DASA_SIM board support but missed to delete board/esd/adciop and board/esd/dasa_sim. It also missed to add entries to doc/README.scrapyard. Signed-off-by: Masahiro Yamada Cc: Stefan Roese Acked-by: Stefan Roese Acked-by: Matthias Fuchs --- diff --git a/board/esd/adciop/Makefile b/board/esd/adciop/Makefile deleted file mode 100644 index d0e264de92..0000000000 --- a/board/esd/adciop/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = adciop.o flash.o ../common/misc.o ../common/pci.o diff --git a/board/esd/adciop/adciop.c b/board/esd/adciop/adciop.c deleted file mode 100644 index b3d637e0a2..0000000000 --- a/board/esd/adciop/adciop.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include "adciop.h" - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -/* ------------------------------------------------------------------------- */ - - -int board_early_init_f (void) -{ - /* - * Set port pin in escc2 to keep living, and configure user led output - */ - *(unsigned char *) 0x2000033e = 0x77; /* ESCC2: PCR bit3=pwr on, bit7=led out */ - *(unsigned char *) 0x2000033c = 0x88; /* ESCC2: PVR pwr on, led off */ - - /* - * Init pci regs - */ - *(unsigned long *) 0x50000304 = 0x02900007; /* enable mem/io/master bits */ - *(unsigned long *) 0x500001b4 = 0x00000000; /* disable pci interrupt output enable */ - *(unsigned long *) 0x50000354 = 0x00c05800; /* disable emun interrupt output enable */ - *(unsigned long *) 0x50000344 = 0x00000000; /* disable pme interrupt output enable */ - *(unsigned long *) 0x50000310 = 0x00000000; /* pcibar0 */ - *(unsigned long *) 0x50000314 = 0x00000000; /* pcibar1 */ - *(unsigned long *) 0x50000318 = 0x00000000; /* pcibar2 */ - - return 0; -} - - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - char str[64]; - int i = getenv_f("serial#", str, sizeof (str)); - - puts ("Board: "); - - if (!i || strncmp (str, "ADCIOP", 6)) { - puts ("### No HW ID - assuming ADCIOP\n"); - return (1); - } - - puts (str); - - putc ('\n'); - - return 0; -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - return (16 * 1024 * 1024); -} - -/* ------------------------------------------------------------------------- */ - -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} diff --git a/board/esd/adciop/adciop.h b/board/esd/adciop/adciop.h deleted file mode 100644 index 75e7950bcd..0000000000 --- a/board/esd/adciop/adciop.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/**************************************************************************** - * FLASH Memory Map as used by TQ Monitor: - * - * Start Address Length - * +-----------------------+ 0x4000_0000 Start of Flash ----------------- - * | MON8xx code | 0x4000_0100 Reset Vector - * +-----------------------+ 0x400?_???? - * | (unused) | - * +-----------------------+ 0x4001_FF00 - * | Ethernet Addresses | 0x78 - * +-----------------------+ 0x4001_FF78 - * | (Reserved for MON8xx) | 0x44 - * +-----------------------+ 0x4001_FFBC - * | Lock Address | 0x04 - * +-----------------------+ 0x4001_FFC0 ^ - * | Hardware Information | 0x40 | MON8xx - * +=======================+ 0x4002_0000 (sector border) ----------------- - * | Autostart Header | | Applications - * | ... | v - * - *****************************************************************************/ diff --git a/board/esd/adciop/flash.c b/board/esd/adciop/flash.c deleted file mode 100644 index b1db12ecc8..0000000000 --- a/board/esd/adciop/flash.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* - * include common flash code (for esd boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size_b0, size_b1; - int i; - - /* Init: no FLASHes known */ - for (i=0; i size_b0) { - printf ("## ERROR: " - "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n", - size_b1, size_b1<<20, - size_b0, size_b0<<20 - ); - flash_info[0].flash_id = FLASH_UNKNOWN; - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[0].sector_count = -1; - flash_info[1].sector_count = -1; - flash_info[0].size = 0; - flash_info[1].size = 0; - return (0); - } - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]); - - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - FLASH_BASE0_PRELIM+size_b0-monitor_flash_len, - FLASH_BASE0_PRELIM+size_b0-1, - &flash_info[0]); - - if (size_b1) { - /* Re-do sizing to get full correct info */ - size_b1 = flash_get_size((vu_long *)(FLASH_BASE0_PRELIM + size_b0), - &flash_info[1]); - - flash_get_offsets (FLASH_BASE0_PRELIM + size_b0, &flash_info[1]); - - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - FLASH_BASE0_PRELIM+size_b0+size_b1-monitor_flash_len, - FLASH_BASE0_PRELIM+size_b0+size_b1-1, - &flash_info[1]); - /* monitor protection OFF by default (one is enough) */ - flash_protect(FLAG_PROTECT_CLEAR, - FLASH_BASE0_PRELIM+size_b0-monitor_flash_len, - FLASH_BASE0_PRELIM+size_b0-1, - &flash_info[0]); - } else { - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - } - - flash_info[0].size = size_b0; - flash_info[1].size = size_b1; - - return (size_b0 + size_b1); -} diff --git a/board/esd/dasa_sim/Makefile b/board/esd/dasa_sim/Makefile deleted file mode 100644 index eb9f5f86d0..0000000000 --- a/board/esd/dasa_sim/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = dasa_sim.o flash.o cmd_dasa_sim.o eeprom.o ../common/pci.o diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c deleted file mode 100644 index 91916247d6..0000000000 --- a/board/esd/dasa_sim/cmd_dasa_sim.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#define OK 0 -#define ERROR (-1) - -extern u_long pci9054_iobase; - - -/*************************************************************************** - * - * Routines for PLX PCI9054 eeprom access - * - */ - -static unsigned int PciEepromReadLongVPD (int offs) -{ - unsigned int value; - unsigned int ret; - int count; - - pci_write_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c, - (offs << 16) | 0x0003); - count = 0; - - for (;;) { - udelay (10 * 1000); - pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c, &ret); - if ((ret & 0x80000000) != 0) { - break; - } else { - count++; - if (count > 10) { - printf ("\nTimeout: ret=%08x - Please try again!\n", ret); - break; - } - } - } - - pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x50, &value); - - return value; -} - - -static int PciEepromWriteLongVPD (int offs, unsigned int value) -{ - unsigned int ret; - int count; - - pci_write_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x50, value); - pci_write_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c, - (offs << 16) | 0x80000003); - count = 0; - - for (;;) { - udelay (10 * 1000); - pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c, &ret); - if ((ret & 0x80000000) == 0) { - break; - } else { - count++; - if (count > 10) { - printf ("\nTimeout: ret=%08x - Please try again!\n", ret); - break; - } - } - } - - return true; -} - - -static void showPci9054 (void) -{ - int val; - int l, i; - - /* read 9054-values */ - for (l = 0; l < 6; l++) { - printf ("%02x: ", l * 0x10); - for (i = 0; i < 4; i++) { - pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN, - l * 16 + i * 4, - (unsigned int *)&val); - printf ("%08x ", val); - } - printf ("\n"); - } - printf ("\n"); - - for (l = 0; l < 7; l++) { - printf ("%02x: ", l * 0x10); - for (i = 0; i < 4; i++) - printf ("%08x ", - PciEepromReadLongVPD ((i + l * 4) * 4)); - printf ("\n"); - } - printf ("\n"); -} - - -static void updatePci9054 (void) -{ - /* - * Set EEPROM write-protect register to 0 - */ - out_be32 ((void *)(pci9054_iobase + 0x0c), - in_be32 ((void *)(pci9054_iobase + 0x0c)) & 0xffff00ff); - - /* Long Serial EEPROM Load Registers... */ - PciEepromWriteLongVPD (0x00, 0x905410b5); - PciEepromWriteLongVPD (0x04, 0x09800001); /* other input controller */ - PciEepromWriteLongVPD (0x08, 0x28140100); - - PciEepromWriteLongVPD (0x0c, 0x00000000); /* MBOX0... */ - PciEepromWriteLongVPD (0x10, 0x00000000); - - /* las0: fpga access (0x0000.0000 ... 0x0003.ffff) */ - PciEepromWriteLongVPD (0x14, 0xfffc0000); /* LAS0RR... */ - PciEepromWriteLongVPD (0x18, 0x00000001); /* LAS0BA */ - - PciEepromWriteLongVPD (0x1c, 0x00200000); /* MARBR... */ - PciEepromWriteLongVPD (0x20, 0x00300500); /* LMISC/BIGEND */ - - PciEepromWriteLongVPD (0x24, 0x00000000); /* EROMRR... */ - PciEepromWriteLongVPD (0x28, 0x00000000); /* EROMBA */ - - PciEepromWriteLongVPD (0x2c, 0x43030000); /* LBRD0... */ - - PciEepromWriteLongVPD (0x30, 0x00000000); /* DMRR... */ - PciEepromWriteLongVPD (0x34, 0x00000000); - PciEepromWriteLongVPD (0x38, 0x00000000); - - PciEepromWriteLongVPD (0x3c, 0x00000000); /* DMPBAM... */ - PciEepromWriteLongVPD (0x40, 0x00000000); - - /* Extra Long Serial EEPROM Load Registers... */ - PciEepromWriteLongVPD (0x44, 0x010212fe); /* PCISID... */ - - /* las1: 505-sram access (0x0004.0000 ... 0x001f.ffff) */ - /* Offset to LAS1: Group 1: 0x00040000 */ - /* Group 2: 0x00080000 */ - /* Group 3: 0x000c0000 */ - PciEepromWriteLongVPD (0x48, 0xffe00000); /* LAS1RR */ - PciEepromWriteLongVPD (0x4c, 0x00040001); /* LAS1BA */ - PciEepromWriteLongVPD (0x50, 0x00000208); /* LBRD1 */ /* so wars bisher */ - - PciEepromWriteLongVPD (0x54, 0x00004c06); /* HotSwap... */ - - printf ("Finished writing defaults into PLX PCI9054 EEPROM!\n"); -} - - -static void clearPci9054 (void) -{ - /* - * Set EEPROM write-protect register to 0 - */ - out_be32 ((void *)(pci9054_iobase + 0x0c), - in_be32 ((void *)(pci9054_iobase + 0x0c)) & 0xffff00ff); - - /* Long Serial EEPROM Load Registers... */ - PciEepromWriteLongVPD (0x00, 0xffffffff); - PciEepromWriteLongVPD (0x04, 0xffffffff); /* other input controller */ - - printf ("Finished clearing PLX PCI9054 EEPROM!\n"); -} - - -/* ------------------------------------------------------------------------- */ -int do_pci9054 (cmd_tbl_t * cmdtp, int flag, int argc, - char * const argv[]) -{ - if (strcmp (argv[1], "info") == 0) { - showPci9054 (); - return 0; - } - - if (strcmp (argv[1], "update") == 0) { - updatePci9054 (); - return 0; - } - - if (strcmp (argv[1], "clear") == 0) { - clearPci9054 (); - return 0; - } - - return cmd_usage(cmdtp); -} - -U_BOOT_CMD( - pci9054, 3, 1, do_pci9054, - "PLX PCI9054 EEPROM access", - "pci9054 info - print EEPROM values\n" - "pci9054 update - updates EEPROM with default values" -); - -/* ------------------------------------------------------------------------- */ diff --git a/board/esd/dasa_sim/dasa_sim.c b/board/esd/dasa_sim/dasa_sim.c deleted file mode 100644 index b779a09e82..0000000000 --- a/board/esd/dasa_sim/dasa_sim.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include "dasa_sim.h" - -/* ------------------------------------------------------------------------- */ - -#undef FPGA_DEBUG - -#define _NOT_USED_ 0xFFFFFFFF - -/* ------------------------------------------------------------------------- */ - -/* fpga configuration data - generated by bit2inc */ -static unsigned char fpgadata[] = { -#include "fpgadata.c" -}; - -#define FPGA_PRG_SLEEP 32 /* fpga program sleep-time */ -#define LOAD_LONG(a) a - - -/****************************************************************************** - * - * sysFpgaBoot - Load fpga-image into fpga - * - */ -static int fpgaBoot (void) -{ - int i, j, index, len; - unsigned char b; - int imageSize; - - imageSize = sizeof (fpgadata); - - /* display infos on fpgaimage */ - index = 15; - for (i = 0; i < 4; i++) { - len = fpgadata[index]; - index += len + 3; - } - - /* search for preamble 0xFF2X */ - for (index = 0; index < imageSize - 1; index++) { - if ((fpgadata[index] == 0xff) - && ((fpgadata[index + 1] & 0xf0) == 0x20)) - break; - } - - /* enable cs1 instead of user0... */ - *(unsigned long *) 0x50000084 &= ~0x00000002; - -#ifdef FPGA_DEBUG - printf ("%s\n", - ((in_be32 ((void *)0x50000084) & 0x00010000) == 0) ? - "NOT DONE" : "DONE"); -#endif - - /* init fpga by asserting and deasserting PROGRAM* (USER2)... */ - *(unsigned long *) 0x50000084 &= ~0x00000400; - udelay (FPGA_PRG_SLEEP * 1000); - - *(unsigned long *) 0x50000084 |= 0x00000400; - udelay (FPGA_PRG_SLEEP * 1000); - -#ifdef FPGA_DEBUG - printf ("%s\n", - ((in_be32 ((void *)0x50000084) & 0x00010000) == 0) ? - "NOT DONE" : "DONE"); -#endif - - /* cs1: disable burst, disable ready */ - *(unsigned long *) 0x50000114 &= ~0x00000300; - - /* cs1: set write timing */ - *(unsigned long *) 0x50000118 |= 0x00010900; - - /* write configuration-data into fpga... */ - for (i = index; i < imageSize; i++) { - b = fpgadata[i]; - for (j = 0; j < 8; j++) { - *(unsigned long *) 0x30000000 = - ((b & 0x80) == 0x80) - ? LOAD_LONG (0x03030101) - : LOAD_LONG (0x02020000); - b <<= 1; - } - } - -#ifdef FPGA_DEBUG - printf ("%s\n", - ((in_be32 ((void *)0x50000084) & 0x00010000) == 0) ? - "NOT DONE" : "DONE"); -#endif - - /* set cs1 to 32 bit data-width, disable burst, enable ready */ - *(unsigned long *) 0x50000114 |= 0x00000202; - *(unsigned long *) 0x50000114 &= ~0x00000100; - - /* cs1: set iop access to little endian */ - *(unsigned long *) 0x50000114 &= ~0x00000010; - - /* cs1: set read and write timing */ - *(unsigned long *) 0x50000118 = 0x00010000; - *(unsigned long *) 0x5000011c = 0x00010001; - -#ifdef FPGA_DEBUG - printf ("%s\n", - ((in_be32 ((void *)0x50000084) & 0x00010000) == 0) ? - "NOT DONE" : "DONE"); -#endif - - /* wait for 30 ms... */ - udelay (30 * 1000); - /* check if fpga's DONE signal - correctly booted ? */ - if ((*(unsigned long *) 0x50000084 & 0x00010000) == 0) - return -1; - - return 0; -} - - -int board_early_init_f (void) -{ - /* - * Init pci regs - */ - *(unsigned long *) 0x50000304 = 0x02900007; /* enable mem/io/master bits */ - *(unsigned long *) 0x500001b4 = 0x00000000; /* disable pci interrupt output enable */ - *(unsigned long *) 0x50000354 = 0x00c05800; /* disable emun interrupt output enable */ - *(unsigned long *) 0x50000344 = 0x00000000; /* disable pme interrupt output enable */ - *(unsigned long *) 0x50000310 = 0x00000000; /* pcibar0 */ - *(unsigned long *) 0x50000314 = 0x00000000; /* pcibar1 */ - *(unsigned long *) 0x50000318 = 0x00000000; /* pcibar2 */ - - return 0; -} - - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - int index; - int len; - char str[64]; - int i = getenv_f("serial#", str, sizeof (str)); - int fpga; - unsigned short val; - - puts ("Board: "); - - /* - * Boot onboard FPGA - */ - fpga = fpgaBoot (); - - if (!i || strncmp (str, "DASA_SIM", 8)) { - puts ("### No HW ID - assuming DASA_SIM"); - } - - puts (str); - - if (fpga == 0) { - val = *(unsigned short *) 0x30000202; - printf (" (Id=%d Version=%d Revision=%d)", - (val & 0x07f8) >> 3, val & 0x0001, (val & 0x0006) >> 1); - - puts ("\nFPGA: "); - - /* display infos on fpgaimage */ - index = 15; - for (i = 0; i < 4; i++) { - len = fpgadata[index]; - printf ("%s ", &(fpgadata[index + 1])); - index += len + 3; - } - } else { - puts ("\nFPGA: Booting failed!"); - } - - putc ('\n'); - - return 0; -} - -phys_size_t initdram (int board_type) -{ - return (16 * 1024 * 1024); -} diff --git a/board/esd/dasa_sim/dasa_sim.h b/board/esd/dasa_sim/dasa_sim.h deleted file mode 100644 index 75e7950bcd..0000000000 --- a/board/esd/dasa_sim/dasa_sim.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/**************************************************************************** - * FLASH Memory Map as used by TQ Monitor: - * - * Start Address Length - * +-----------------------+ 0x4000_0000 Start of Flash ----------------- - * | MON8xx code | 0x4000_0100 Reset Vector - * +-----------------------+ 0x400?_???? - * | (unused) | - * +-----------------------+ 0x4001_FF00 - * | Ethernet Addresses | 0x78 - * +-----------------------+ 0x4001_FF78 - * | (Reserved for MON8xx) | 0x44 - * +-----------------------+ 0x4001_FFBC - * | Lock Address | 0x04 - * +-----------------------+ 0x4001_FFC0 ^ - * | Hardware Information | 0x40 | MON8xx - * +=======================+ 0x4002_0000 (sector border) ----------------- - * | Autostart Header | | Applications - * | ... | v - * - *****************************************************************************/ diff --git a/board/esd/dasa_sim/eeprom.c b/board/esd/dasa_sim/eeprom.c deleted file mode 100644 index 1fc78decd2..0000000000 --- a/board/esd/dasa_sim/eeprom.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#define EEPROM_CAP 0x50000358 -#define EEPROM_DATA 0x5000035c - - -unsigned int eepromReadLong(int offs) -{ - unsigned int value; - unsigned short ret; - int count; - - out_be16((void *)EEPROM_CAP, offs); - - count = 0; - - for (;;) - { - count++; - ret = in_be16((void *)EEPROM_CAP); - - if ((ret & 0x8000) != 0) - break; - } - - value = in_be32((void *)EEPROM_DATA); - - return value; -} - - -unsigned char eepromReadByte(int offs) -{ - unsigned int valueLong; - unsigned char *ptr; - - valueLong = eepromReadLong(offs & ~3); - ptr = (unsigned char *)&valueLong; - - return ptr[offs & 3]; -} - - -void eepromWriteLong(int offs, unsigned int value) -{ - unsigned short ret; - int count; - - count = 0; - - out_be32((void *)EEPROM_DATA, value); - out_be16((void *)EEPROM_CAP, 0x8000 + offs); - - for (;;) - { - count++; - ret = in_be16((void *)EEPROM_CAP); - - if ((ret & 0x8000) == 0) - break; - } -} - - -void eepromWriteByte(int offs, unsigned char valueByte) -{ - unsigned int valueLong; - unsigned char *ptr; - - valueLong = eepromReadLong(offs & ~3); - ptr = (unsigned char *)&valueLong; - - ptr[offs & 3] = valueByte; - - eepromWriteLong(offs & ~3, valueLong); -} - - -void i2c_read (uchar *addr, int alen, uchar *buffer, int len) -{ - int i; - int len2, ptr; - - /* printf("\naddr=%x alen=%x buffer=%x len=%x", addr[0], addr[1], *(short *)addr, alen, buffer, len); /###* test-only */ - - ptr = *(short *)addr; - - /* - * Read till lword boundary - */ - len2 = 4 - (*(short *)addr & 0x0003); - for (i=0; i> 2; - for (i=0; i> 2; - for (i=0; i -#include -#include - -/* - * include common flash code (for esd boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static void flash_get_offsets (ulong base, flash_info_t *info); - - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size_b0; - int i; - - /* Init: no FLASHes known */ - for (i=0; i> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/doc/README.scrapyard b/doc/README.scrapyard index e49de542f8..0a6c6b5617 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -44,6 +44,8 @@ LANTEC powerpc mpc850 1b0757e 2012-10-28 Wolfgang Den SCM powerpc mpc8260 1b0757e 2012-10-28 Wolfgang Grandegger SX1 arm arm925t 53c4154 2012-10-26 TQM85xx powerpc MPC85xx d923a5d 2012-10-04 Stefan Roese +ADCIOP powerpc ppc4xx 99bcad1 2012-09-19 Matthias Fuchs +DASA_SIM powerpc ppc4xx 99bcad1 2012-09-19 Matthias Fuchs apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park tb0229 mips mips32 3f3110d 2011-12-12 rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk