From: Tom Rini Date: Fri, 18 Mar 2022 12:38:23 +0000 (-0400) Subject: Convert CONFIG_TFTP_PORT to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=5842c8107d9a13b958fa894b22485b32e078f75b;p=u-boot.git Convert CONFIG_TFTP_PORT to Kconfig This converts the following to Kconfig: CONFIG_TFTP_PORT Cc: Ramon Fried Signed-off-by: Tom Rini --- diff --git a/README b/README index 9cddb1314c..c704d0a007 100644 --- a/README +++ b/README @@ -1612,26 +1612,6 @@ The following options need to be configured: this is instead controlled by the value of /config/load-environment. -- TFTP Fixed UDP Port: - CONFIG_TFTP_PORT - - If this is defined, the environment variable tftpsrcp - is used to supply the TFTP UDP source port value. - If tftpsrcp isn't defined, the normal pseudo-random port - number generator is used. - - Also, the environment variable tftpdstp is used to supply - the TFTP UDP destination port value. If tftpdstp isn't - defined, the normal port 69 is used. - - The purpose for tftpsrcp is to allow a TFTP server to - blindly start the TFTP transfer using the pre-configured - target IP address and UDP port. This has the effect of - "punching through" the (Windows XP) firewall, allowing - the remainder of the TFTP transfer to proceed normally. - A better solution is to properly configure the firewall, - but sometimes that is not allowed. - CONFIG_STANDALONE_LOAD_ADDR This option defines a board specific value for the diff --git a/configs/gurnard_defconfig b/configs/gurnard_defconfig index 47678e6c51..fc6c2b96b7 100644 --- a/configs/gurnard_defconfig +++ b/configs/gurnard_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RETRY_COUNT=20 +CONFIG_TFTP_PORT=y CONFIG_TFTP_TSIZE=y CONFIG_AT91_GPIO=y CONFIG_GENERIC_ATMEL_MCI=y diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig index 76b51d9fd4..04b3f7cdde 100644 --- a/configs/snapper9260_defconfig +++ b/configs/snapper9260_defconfig @@ -38,6 +38,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RETRY_COUNT=20 +CONFIG_TFTP_PORT=y CONFIG_TFTP_TSIZE=y CONFIG_AT91_GPIO=y CONFIG_CMD_PCA953X=y diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig index c6eca225e2..7eb512d92f 100644 --- a/configs/snapper9g20_defconfig +++ b/configs/snapper9g20_defconfig @@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RETRY_COUNT=20 +CONFIG_TFTP_PORT=y CONFIG_TFTP_TSIZE=y CONFIG_AT91_GPIO=y CONFIG_CMD_PCA953X=y diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 2f0309f0cc..f7ee9dbac3 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -37,9 +37,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 -/* Ethernet */ -#define CONFIG_TFTP_PORT - /* USB */ #define CONFIG_USB_ATMEL #define CONFIG_USB_ATMEL_CLK_SEL_PLLB diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index 72611fe850..9e78fd219c 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -38,9 +38,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 -/* Ethernet */ -#define CONFIG_TFTP_PORT - /* LCD */ #define CONFIG_ATMEL_LCD #define CONFIG_GURNARD_SPLASH diff --git a/net/Kconfig b/net/Kconfig index 650551606d..af6856f7fc 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -83,6 +83,24 @@ config TFTP_BLOCKSIZE almost-MTU block sizes. You can also activate CONFIG_IP_DEFRAG to set a larger block. +config TFTP_PORT + bool "Set TFTP UDP source/destination ports via the environment" + help + If this is defined, the environment variable tftpsrcp is used to + supply the TFTP UDP source port value. If tftpsrcp isn't defined, + the normal pseudo-random port number generator is used. + + Also, the environment variable tftpdstp is used to supply the TFTP + UDP destination port value. If tftpdstp isn't defined, the normal + port 69 is used. + + The purpose for tftpsrcp is to allow a TFTP server to blindly start + the TFTP transfer using the pre-configured target IP address and UDP + port. This has the effect of "punching through" the (Windows XP) + firewall, allowing the remainder of the TFTP transfer to proceed + normally. A better solution is to properly configure the firewall, + but sometimes that is not allowed. + config TFTP_WINDOWSIZE int "TFTP window size" default 1