From: Dylan Hung Date: Fri, 11 Nov 2022 07:30:06 +0000 (+0800) Subject: ram: ast2600: Fix incorrect statement of the register polling X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=581df347dbc3f5b528be8b36a62372c0aadde30a;p=u-boot.git ram: ast2600: Fix incorrect statement of the register polling The condition "~data" in the if-statement is a typo. The original intention is to poll if SDRAM_PHYCTRL0_INIT bit equals to 0. So use "data == 0" for instead. Besides, the bit[1] of "phy_status" register is hardwired to SDRAM_PHYCTRL0_INIT (with inverse logic). Since SDRAM_PHYCTRL0_INIT has already done, remove the unnecessary checking of phy_status[1]. Fixes: fde93143469f ("ram: aspeed: Add AST2600 DRAM control support") Review-by: Ryan Chen Signed-off-by: Dylan Hung --- diff --git a/drivers/ram/aspeed/sdram_ast2600.c b/drivers/ram/aspeed/sdram_ast2600.c index 9ad398d241..b09232a304 100644 --- a/drivers/ram/aspeed/sdram_ast2600.c +++ b/drivers/ram/aspeed/sdram_ast2600.c @@ -449,7 +449,7 @@ static void ast2600_sdramphy_kick_training(struct dram_info *info) while (1) { data = readl(®s->phy_ctrl[0]) & SDRAM_PHYCTRL0_INIT; - if (~data) + if (data == 0) break; } } @@ -984,11 +984,6 @@ static int ast2600_sdrammc_probe(struct udevice *dev) L_ast2600_sdramphy_train: ast2600_sdrammc_init_ddr4(priv); - /* make sure DDR-PHY is ready before access */ - do { - reg = readl(priv->phy_status) & BIT(1); - } while (reg == 0); - if (ast2600_sdramphy_check_status(priv) != 0) { printf("DDR4 PHY training fail, retrain\n"); goto L_ast2600_sdramphy_train;