From: Simon Glass Date: Sun, 11 Aug 2024 14:50:40 +0000 (-0600) Subject: i2c: Drop reference to SYS_I2C_INIT_BOARD X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=56ec7a69d8ec5bc29c1834685bf84d09dd5da43e;p=u-boot.git i2c: Drop reference to SYS_I2C_INIT_BOARD This is not now used by any boards, so drop it. Signed-off-by: Simon Glass Reviewed-by: Heiko Schocher --- diff --git a/doc/I2C_Edge_Conditions b/doc/I2C_Edge_Conditions index f4a9968701..9ccb21c509 100644 --- a/doc/I2C_Edge_Conditions +++ b/doc/I2C_Edge_Conditions @@ -31,12 +31,10 @@ Notes !!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A AMCC 4xx BUG!!! This reset edge condition could possibly be present in every I2C -controller and device available. For boards where a I2C bus reset -function can be implemented a i2c_init_board() function should be -provided and enabled by #define'ing CONFIG_SYS_I2C_INIT_BOARD in your -board's config file. Note that this is NOT necessary when using the -bit-banging I2C driver (common/soft_i2c.c) as this already includes -the I2C bus reset sequence. +controller and device available. + +Note that this problem does not happen when using the bit-banging I2C driver +(common/soft_i2c.c) as this already includes the I2C bus reset sequence. Many thanks to Bill Hunter for finding this serious BUG. diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 89ddf82106..79f7a32050 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -107,16 +107,13 @@ DECLARE_GLOBAL_DATA_PTR; /*----------------------------------------------------------------------- * Local functions */ -#if !defined(CONFIG_SYS_I2C_INIT_BOARD) static void send_reset (void); -#endif static void send_start (void); static void send_stop (void); static void send_ack (int); static int write_byte (uchar byte); static uchar read_byte (int); -#if !defined(CONFIG_SYS_I2C_INIT_BOARD) /*----------------------------------------------------------------------- * Send a reset sequence consisting of 9 clocks with the data signal high * to clock any confused device back into an idle state. Also send a @@ -144,7 +141,6 @@ static void send_reset(void) send_stop(); I2C_TRISTATE; } -#endif /*----------------------------------------------------------------------- * START: High -> Low on SDA while SCL is High @@ -277,12 +273,6 @@ static uchar read_byte(int ack) */ static void soft_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) { -#if defined(CONFIG_SYS_I2C_INIT_BOARD) - /* call board specific i2c bus reset routine before accessing the */ - /* environment, which might be in a chip on that bus. For details */ - /* about this problem see doc/I2C_Edge_Conditions. */ - i2c_init_board(); -#else /* * WARNING: Do NOT save speed in a static variable: if the * I2C routines are called before RAM is initialized (to read @@ -290,7 +280,6 @@ static void soft_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) * system will crash. */ send_reset (); -#endif } /*-----------------------------------------------------------------------