From: Michal Simek <michal.simek@xilinx.com>
Date: Wed, 18 Apr 2018 12:03:56 +0000 (+0200)
Subject: timer: cadence: Implement timer_get_boot_us
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=56c0e646c4f6aeb263d9bff01b3619d81a0b062e;p=u-boot.git

timer: cadence: Implement timer_get_boot_us

This function is required for adding bootstage support.
Also enable it directly for ZynqMP R5 configuration.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/configs/xilinx_zynqmp_r5_defconfig b/configs/xilinx_zynqmp_r5_defconfig
index 52b3f75902..9e667ff7d5 100644
--- a/configs/xilinx_zynqmp_r5_defconfig
+++ b/configs/xilinx_zynqmp_r5_defconfig
@@ -5,10 +5,12 @@ CONFIG_DEBUG_UART_BASE=0xff010000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-r5"
 CONFIG_DEBUG_UART=y
+CONFIG_BOOTSTAGE=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SYS_PROMPT="ZynqMP r5> "
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_BOOTSTAGE=y
 CONFIG_OF_EMBED=y
 CONFIG_DEBUG_UART_ZYNQ=y
 CONFIG_ZYNQ_SERIAL=y
diff --git a/drivers/timer/cadence-ttc.c b/drivers/timer/cadence-ttc.c
index 3541e5c841..4125a078b3 100644
--- a/drivers/timer/cadence-ttc.c
+++ b/drivers/timer/cadence-ttc.c
@@ -31,6 +31,28 @@ struct cadence_ttc_priv {
 	struct cadence_ttc_regs *regs;
 };
 
+#if CONFIG_IS_ENABLED(BOOTSTAGE)
+ulong timer_get_boot_us(void)
+{
+	u64 ticks = 0;
+	u32 rate = 1;
+	u64 us;
+	int ret;
+
+	ret = dm_timer_init();
+	if (!ret) {
+		/* The timer is available */
+		rate = timer_get_rate(gd->timer);
+		timer_get_count(gd->timer, &ticks);
+	} else {
+		return 0;
+	}
+
+	us = (ticks * 1000) / rate;
+	return us;
+}
+#endif
+
 static int cadence_ttc_get_count(struct udevice *dev, u64 *count)
 {
 	struct cadence_ttc_priv *priv = dev_get_priv(dev);