From: Fabio Estevam <festevam@denx.de>
Date: Wed, 22 Mar 2023 19:59:31 +0000 (-0300)
Subject: imx6sx-udoo-neo-basic: Introduce the u-boot.dtsi
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=565681e596381b5b6db59cf06931e698f2d829e5;p=u-boot.git

imx6sx-udoo-neo-basic: Introduce the u-boot.dtsi

After the conversion to DM_SERIAL in commit 01f372d8d62b ("udoo_neo:
Select DM_SERIAL and drop iomux board level init") the SPL log is gone
and the U-Boot proper log becomes incomplete:

Core:  80 devices, 18 uclasses, devicetree: separate
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@2020000
Out:   serial@2020000
Err:   serial@2020000
Net:   eth0: ethernet@2188000
Hit any key to stop autoboot:  0

Introduce the u-boot.dtsi file that passes the u-boot,dm-pre-reloc
properties to the relevant nodes so that UART can be used early in SPL.

With this change, the complete SPL and U-Boot messages are seen again.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---

diff --git a/arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi b/arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi
new file mode 100644
index 0000000000..be755e125b
--- /dev/null
+++ b/arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+&soc {
+	u-boot,dm-pre-reloc;
+};
+
+&aips1 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+};