From: Tero Kristo Date: Fri, 11 Jun 2021 08:45:19 +0000 (+0300) Subject: arm: mach-k3: add support for detecting firmware images from FIT X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=547b277cd9252408bc7b12abaacda01e3b6e2eba;p=u-boot.git arm: mach-k3: add support for detecting firmware images from FIT Add callback routines for parsing the firmware info from FIT image, and use the data to boot up ATF and the MCU R5 firmware. Signed-off-by: Tero Kristo Signed-off-by: Tero Kristo --- diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c index 9191f686f0..0a1638ee04 100644 --- a/arch/arm/mach-k3/common.c +++ b/arch/arm/mach-k3/common.c @@ -28,6 +28,27 @@ #include #include +#if IS_ENABLED(CONFIG_SYS_K3_SPL_ATF) +enum { + IMAGE_ID_ATF, + IMAGE_ID_OPTEE, + IMAGE_ID_SPL, + IMAGE_ID_DM_FW, + IMAGE_AMT, +}; + +#if CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS) +static const char *image_os_match[IMAGE_AMT] = { + "arm-trusted-firmware", + "tee", + "U-Boot", + "DM", +}; +#endif + +static struct image_info fit_image_info[IMAGE_AMT]; +#endif + struct ti_sci_handle *get_ti_sci_handle(void) { struct udevice *dev; @@ -107,7 +128,7 @@ int early_console_init(void) } #endif -#ifdef CONFIG_SYS_K3_SPL_ATF +#if IS_ENABLED(CONFIG_SYS_K3_SPL_ATF) void init_env(void) { @@ -181,7 +202,7 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) typedef void __noreturn (*image_entry_noargs_t)(void); struct ti_sci_handle *ti_sci = get_ti_sci_handle(); u32 loadaddr = 0; - int ret, size; + int ret, size = 0; /* Release all the exclusive devices held by SPL before starting ATF */ ti_sci->ops.dev_ops.release_exclusive_devices(ti_sci); @@ -192,15 +213,20 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) init_env(); start_non_linux_remote_cores(); - size = load_firmware("name_mcur5f0_0fw", "addr_mcur5f0_0load", - &loadaddr); + if (!fit_image_info[IMAGE_ID_DM_FW].image_start) + size = load_firmware("name_mcur5f0_0fw", "addr_mcur5f0_0load", + &loadaddr); /* * It is assumed that remoteproc device 1 is the corresponding * Cortex-A core which runs ATF. Make sure DT reflects the same. */ - ret = rproc_load(1, spl_image->entry_point, 0x200); + if (!fit_image_info[IMAGE_ID_ATF].image_start) + fit_image_info[IMAGE_ID_ATF].image_start = + spl_image->entry_point; + + ret = rproc_load(1, fit_image_info[IMAGE_ID_ATF].image_start, 0x200); if (ret) panic("%s: ATF failed to load on rproc (%d)\n", __func__, ret); @@ -210,7 +236,8 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) ret = rproc_start(1); if (ret) panic("%s: ATF failed to start on rproc (%d)\n", __func__, ret); - if (!(size > 0 && valid_elf_image(loadaddr))) { + if (!fit_image_info[IMAGE_ID_DM_FW].image_len && + !(size > 0 && valid_elf_image(loadaddr))) { debug("Shutting down...\n"); release_resources_for_core_shutdown(); @@ -218,13 +245,54 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) asm volatile("wfe"); } - image_entry_noargs_t image_entry = - (image_entry_noargs_t)load_elf_image_phdr(loadaddr); + if (!fit_image_info[IMAGE_ID_DM_FW].image_start) { + loadaddr = load_elf_image_phdr(loadaddr); + } else { + loadaddr = fit_image_info[IMAGE_ID_DM_FW].image_start; + if (valid_elf_image(loadaddr)) + loadaddr = load_elf_image_phdr(loadaddr); + } + + debug("%s: jumping to address %x\n", __func__, loadaddr); + + image_entry_noargs_t image_entry = (image_entry_noargs_t)loadaddr; image_entry(); } #endif +#if CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS) +void board_fit_image_post_process(const void *fit, int node, void **p_image, + size_t *p_size) +{ +#if IS_ENABLED(CONFIG_SYS_K3_SPL_ATF) + int len; + int i; + const char *os; + u32 addr; + + os = fdt_getprop(fit, node, "os", &len); + addr = fdt_getprop_u32_default_node(fit, node, 0, "entry", -1); + + debug("%s: processing image: addr=%x, size=%d, os=%s\n", __func__, + addr, *p_size, os); + + for (i = 0; i < IMAGE_AMT; i++) { + if (!strcmp(os, image_os_match[i])) { + fit_image_info[i].image_start = addr; + fit_image_info[i].image_len = *p_size; + debug("%s: matched image for ID %d\n", __func__, i); + break; + } + } +#endif + +#if IS_ENABLED(CONFIG_TI_SECURE_DEVICE) + ti_secure_image_post_process(p_image, p_size); +#endif +} +#endif + #if defined(CONFIG_OF_LIBFDT) int fdt_fixup_msmc_ram(void *blob, char *parent_path, char *node_name) { diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h index a6dbc7808b..f421ed1bb1 100644 --- a/arch/arm/mach-k3/common.h +++ b/arch/arm/mach-k3/common.h @@ -28,3 +28,4 @@ void k3_sysfw_print_ver(void); void spl_enable_dcache(void); void mmr_unlock(phys_addr_t base, u32 partition); bool is_rom_loaded_sysfw(struct rom_extended_boot_data *data); +void ti_secure_image_post_process(void **p_image, size_t *p_size); diff --git a/arch/arm/mach-k3/security.c b/arch/arm/mach-k3/security.c index 5b5ff9ba7b..8de9739a40 100644 --- a/arch/arm/mach-k3/security.c +++ b/arch/arm/mach-k3/security.c @@ -18,8 +18,7 @@ #include #include -void board_fit_image_post_process(const void *fit, int node, void **p_image, - size_t *p_size) +void ti_secure_image_post_process(void **p_image, size_t *p_size) { struct ti_sci_handle *ti_sci = get_ti_sci_handle(); struct ti_sci_proc_ops *proc_ops = &ti_sci->ops.proc_ops;