From: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Date: Fri, 26 Oct 2018 12:17:55 +0000 (+0530)
Subject: arm64: zynqmp: Fix logic in CG/EG/EV detection
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=5473f245d0a884ffd1a7f353b86d5d11e01d3ebd;p=u-boot.git

arm64: zynqmp: Fix logic in CG/EG/EV detection

The VCU disable bit(8) in IP disable register of efuse
is valid only if PL powered up and hence PL powerup status
has to be considered while determining the CG part also.
This patch considers the PL powerup status and ignores the VCU
disable bit if PL not powered up.
This fixes the issue of "unknown" id for CG parts if PL not powered up
and VCU bit(8) is not set.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index af91cde7c8..168cf5c14b 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -72,6 +72,7 @@ static const struct {
 		.id = 0x20,
 		.ver = 0x12c,
 		.name = "5cg",
+		.evexists = 1,
 	},
 	{
 		.id = 0x21,
@@ -88,6 +89,7 @@ static const struct {
 		.id = 0x21,
 		.ver = 0x12c,
 		.name = "4cg",
+		.evexists = 1,
 	},
 	{
 		.id = 0x30,
@@ -104,6 +106,7 @@ static const struct {
 		.id = 0x30,
 		.ver = 0x12c,
 		.name = "7cg",
+		.evexists = 1,
 	},
 	{
 		.id = 0x38,
@@ -234,14 +237,18 @@ int chip_id(unsigned char id)
 
 #define ZYNQMP_VERSION_SIZE		9
 #define ZYNQMP_PL_STATUS_BIT		9
+#define ZYNQMP_IPDIS_VCU_BIT		8
 #define ZYNQMP_PL_STATUS_MASK		BIT(ZYNQMP_PL_STATUS_BIT)
 #define ZYNQMP_CSU_VERSION_MASK		~(ZYNQMP_PL_STATUS_MASK)
+#define ZYNQMP_CSU_VCUDIS_VER_MASK	ZYNQMP_CSU_VERSION_MASK & \
+					~BIT(ZYNQMP_IPDIS_VCU_BIT)
+#define MAX_VARIANTS_EV			3
 
 #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
 	!defined(CONFIG_SPL_BUILD)
 static char *zynqmp_get_silicon_idcode_name(void)
 {
-	u32 i, id, ver;
+	u32 i, id, ver, j;
 	char *buf;
 	static char name[ZYNQMP_VERSION_SIZE];
 
@@ -249,24 +256,43 @@ static char *zynqmp_get_silicon_idcode_name(void)
 	ver = chip_id(IDCODE2);
 
 	for (i = 0; i < ARRAY_SIZE(zynqmp_devices); i++) {
-		if ((zynqmp_devices[i].id == id) &&
-		    (zynqmp_devices[i].ver == (ver &
-		    ZYNQMP_CSU_VERSION_MASK))) {
-			strncat(name, "zu", 2);
-			strncat(name, zynqmp_devices[i].name,
-				ZYNQMP_VERSION_SIZE - 3);
-			break;
+		if (zynqmp_devices[i].id == id) {
+			if (zynqmp_devices[i].evexists &&
+			    !(ver & ZYNQMP_PL_STATUS_MASK))
+				break;
+			if (zynqmp_devices[i].ver == (ver &
+			    ZYNQMP_CSU_VERSION_MASK))
+				break;
 		}
 	}
 
 	if (i >= ARRAY_SIZE(zynqmp_devices))
 		return "unknown";
 
-	if (!zynqmp_devices[i].evexists)
+	strncat(name, "zu", 2);
+	if (!zynqmp_devices[i].evexists ||
+	    (ver & ZYNQMP_PL_STATUS_MASK)) {
+		strncat(name, zynqmp_devices[i].name,
+			ZYNQMP_VERSION_SIZE - 3);
 		return name;
+	}
 
-	if (ver & ZYNQMP_PL_STATUS_MASK)
-		return name;
+	/*
+	 * Here we are means, PL not powered up and ev variant
+	 * exists. So, we need to ignore VCU disable bit(8) in
+	 * version and findout if its CG or EG/EV variant.
+	 */
+	for (j = 0; j < MAX_VARIANTS_EV; j++, i++) {
+		if ((zynqmp_devices[i].ver & ~BIT(ZYNQMP_IPDIS_VCU_BIT)) ==
+		    (ver & ZYNQMP_CSU_VCUDIS_VER_MASK)) {
+			strncat(name, zynqmp_devices[i].name,
+				ZYNQMP_VERSION_SIZE - 3);
+			break;
+		}
+	}
+
+	if (j >= MAX_VARIANTS_EV)
+		return "unknown";
 
 	if (strstr(name, "eg") || strstr(name, "ev")) {
 		buf = strstr(name, "e");