From: Tom Rini Date: Fri, 17 Jun 2022 20:24:31 +0000 (-0400) Subject: arch/Kconfig.nxp: Re-organize slightly X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=540b73a7be6dbe87a2f0c9e86d1d9178bc7f7b76;p=u-boot.git arch/Kconfig.nxp: Re-organize slightly Make all of the CHAIN_OF_TRUST options be under a single menu and add a comment for the rest, so the resulting config file reads more clearly. Remove duplicate CHAIN_OF_TRUST options from board/congatec/common/Kconfig. Remove duplicate NXP_ESBC config questions and move to arch/Kconfig.nxp. Signed-off-by: Tom Rini --- diff --git a/arch/Kconfig.nxp b/arch/Kconfig.nxp index 22ae186b35..273e8e86da 100644 --- a/arch/Kconfig.nxp +++ b/arch/Kconfig.nxp @@ -1,7 +1,13 @@ -config CHAIN_OF_TRUST +config NXP_ESBC + bool "NXP ESBC (secure boot) functionality" + help + Enable Freescale Secure Boot feature. Normally selected by defconfig. + If unsure, do not change. + +menu "Chain of trust / secure boot options" depends on !FIT_SIGNATURE && NXP_ESBC - imply CMD_BLOB - imply CMD_HASH if ARM + +config CHAIN_OF_TRUST select FSL_CAAM select ARCH_MISC_INIT select FSL_SEC_MON @@ -12,12 +18,12 @@ config CHAIN_OF_TRUST select ENV_IS_NOWHERE select CMD_EXT4 if ARM select CMD_EXT4_WRITE if ARM - bool - default y + imply CMD_BLOB + imply CMD_HASH if ARM + def_bool y config CMD_ESBC_VALIDATE bool "Enable the 'esbc_validate' and 'esbc_halt' commands" - depends on CHAIN_OF_TRUST default y help This option enables two commands used for secure booting: @@ -36,15 +42,14 @@ config ESBC_ADDR_64BIT config SYS_FSL_SFP_BE def_bool y - depends on CHAIN_OF_TRUST && (PPC || FSL_LSCH2 || ARCH_LS1021A) + depends on PPC || FSL_LSCH2 || ARCH_LS1021A config SYS_FSL_SFP_LE def_bool y - depends on CHAIN_OF_TRUST && !SYS_FSL_SFP_BE + depends on !SYS_FSL_SFP_BE choice prompt "SFP IP revision" - depends on CHAIN_OF_TRUST default SYS_FSL_SFP_VER_3_0 if PPC default SYS_FSL_SFP_VER_3_4 @@ -61,11 +66,14 @@ endchoice config SYS_FSL_SRK_LE def_bool y - depends on CHAIN_OF_TRUST && ARM + depends on ARM config KEY_REVOCATION def_bool y - depends on CHAIN_OF_TRUST + +endmenu + +comment "Other functionality shared between NXP SoCs" config DEEP_SLEEP bool "Enable SoC deep sleep feature" diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index c496e64391..a901360fa7 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -41,12 +41,6 @@ config MAX_CPUS cores, count the reserved ports. This will allocate enough memory in spin table to properly handle all cores. -config NXP_ESBC - bool "NXP_ESBC" - help - Enable Freescale Secure Boot feature. Normally selected - by defconfig. If unsure, do not change. - config SYS_CCI400_OFFSET hex "Offset for CCI400 base" depends on SYS_FSL_HAS_CCI400 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 7f08733a35..602b624dca 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -26,7 +26,7 @@ config ARCH_LS1012A config ARCH_LS1028A bool select ARMV8_SET_SMPEN - select ESBC_HDR_LS + select ESBC_HDR_LS if CHAIN_OF_TRUST select FSL_LAYERSCAPE select FSL_LSCH3 select GICV3 @@ -139,7 +139,7 @@ config ARCH_LS1088A bool select ARMV8_SET_SMPEN select ARM_ERRATA_855873 if !TFABOOT - select ESBC_HDR_LS + select ESBC_HDR_LS if CHAIN_OF_TRUST select FSL_IFC select FSL_LAYERSCAPE select FSL_LSCH3 @@ -189,7 +189,7 @@ config ARCH_LS2080A select ARM_ERRATA_828024 select ARM_ERRATA_829520 select ARM_ERRATA_833471 - select ESBC_HDR_LS + select ESBC_HDR_LS if CHAIN_OF_TRUST select FSL_IFC select FSL_LAYERSCAPE select FSL_LSCH3 @@ -242,7 +242,7 @@ config ARCH_LS2080A config ARCH_LX2162A bool select ARMV8_SET_SMPEN - select ESBC_HDR_LS + select ESBC_HDR_LS if CHAIN_OF_TRUST select FSL_DDR_BIST select FSL_DDR_INTERACTIVE select FSL_LAYERSCAPE @@ -281,7 +281,7 @@ config ARCH_LX2162A config ARCH_LX2160A bool select ARMV8_SET_SMPEN - select ESBC_HDR_LS + select ESBC_HDR_LS if CHAIN_OF_TRUST select FSL_DDR_BIST select FSL_DDR_INTERACTIVE select FSL_LAYERSCAPE @@ -461,11 +461,6 @@ config EMC2305 Enable the EMC2305 fan controller for configuration of fan speed. -config NXP_ESBC - bool "NXP_ESBC" - help - Enable Freescale Secure Boot feature - config QSPI_AHB_INIT bool "Init the QSPI AHB bus" help diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 0ef5e730bd..e7003d3b64 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -827,12 +827,6 @@ config FSL_LAW config HETROGENOUS_CLUSTERS bool -config NXP_ESBC - bool "NXP_ESBC" - help - Enable Freescale Secure Boot feature. Normally selected - by defconfig. If unsure, do not change. - config MAX_CPUS int "Maximum number of CPUs permitted for MPC85xx" default 12 if ARCH_T4240 diff --git a/board/congatec/common/Kconfig b/board/congatec/common/Kconfig index d4a238de99..a1f2139219 100644 --- a/board/congatec/common/Kconfig +++ b/board/congatec/common/Kconfig @@ -1,44 +1,3 @@ -if !ARCH_IMX8M && !ARCH_IMX8 - -config CHAIN_OF_TRUST - depends on !FIT_SIGNATURE && SECURE_BOOT - imply CMD_BLOB - imply CMD_HASH if ARM - select FSL_CAAM - select SPL_BOARD_INIT if (ARM && SPL) - select SHA_HW_ACCEL - select SHA_PROG_HW_ACCEL - select ENV_IS_NOWHERE - select CMD_EXT4 if ARM - select CMD_EXT4_WRITE if ARM - bool - default y - -config CMD_ESBC_VALIDATE - bool "Enable the 'esbc_validate' and 'esbc_halt' commands" - default y if CHAIN_OF_TRUST - help - This option enables two commands used for secure booting: - - esbc_validate - validate signature using RSA verification - esbc_halt - put the core in spin loop (Secure Boot Only) - -endif - -config VOL_MONITOR_LTC3882_READ - depends on VID - bool "Enable the LTC3882 voltage monitor read" - help - This option enables LTC3882 voltage monitor read - functionality. It is used by common VID driver. - -config VOL_MONITOR_LTC3882_SET - depends on VID - bool "Enable the LTC3882 voltage monitor set" - help - This option enables LTC3882 voltage monitor set - functionality. It is used by common VID driver. - config USB_TCPC bool "USB Typec port controller simple driver" help