From: Chin Liang See Date: Sun, 7 Aug 2016 14:50:40 +0000 (+0800) Subject: spi: cadence_qspi_apb: Ensure baudrate doesn't exceed max value X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=5405817a6e7a6538c4bcb1c3076ddc83fe5d03f9;p=u-boot.git spi: cadence_qspi_apb: Ensure baudrate doesn't exceed max value Ensuring the baudrate divisor value doesn't exceed the max value in the calculation.It will be capped at max value to ensure the correct value being written into the register. Example of the existing bug is when calculated div = 16. After and with the mask, the value written to register is actually 0 (register field for baudrate divisor). With this fix, the value written is now 15 which is max value for baudrate divisor. Signed-off-by: Chin Liang See Cc: Marek Vasut Cc: Jagan Teki Cc: Dinh Nguyen --- diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c index 1a35d558a6..1d68379c93 100644 --- a/drivers/spi/cadence_qspi_apb.c +++ b/drivers/spi/cadence_qspi_apb.c @@ -293,8 +293,11 @@ void cadence_qspi_apb_config_baudrate_div(void *reg_base, debug("%s: ref_clk %dHz sclk %dHz Div 0x%x\n", __func__, ref_clk_hz, sclk_hz, div); - div = (div & CQSPI_REG_CONFIG_BAUD_MASK) << CQSPI_REG_CONFIG_BAUD_LSB; - reg |= div; + /* ensure the baud rate doesn't exceed the max value */ + if (div > CQSPI_REG_CONFIG_BAUD_MASK) + div = CQSPI_REG_CONFIG_BAUD_MASK; + + reg |= (div << CQSPI_REG_CONFIG_BAUD_LSB); writel(reg, reg_base + CQSPI_REG_CONFIG); cadence_qspi_apb_controller_enable(reg_base);