From: Simon Glass Date: Wed, 20 Sep 2023 13:29:51 +0000 (-0600) Subject: efi: Use the installed SMBIOS tables X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=53fab13a7b11630aeb731c8ef7553cf773311a9f;p=u-boot.git efi: Use the installed SMBIOS tables U-Boot should set up the SMBIOS tables during startup, as it does on x86. Ensure that it does this correctly on non-x86 machines too, by creating an event spy for last-stage init. Tidy up the installation-condition code while we are here. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c index 3fe5319437..04124d8014 100644 --- a/board/Marvell/mvebu_armada-37xx/board.c +++ b/board/Marvell/mvebu_armada-37xx/board.c @@ -307,7 +307,8 @@ static int last_stage_init(void) struct udevice *bus; ofnode node; - if (!of_machine_is_compatible("globalscale,espressobin")) + if (!CONFIG_IS_ENABLED(DM_MDIO) || + !of_machine_is_compatible("globalscale,espressobin")) return 0; node = ofnode_by_compatible(ofnode_null(), "marvell,orion-mdio"); diff --git a/lib/Kconfig b/lib/Kconfig index 6b5389f3a8..79cf9ef0fa 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -1049,6 +1049,7 @@ config SMBIOS bool "SMBIOS support" depends on X86 || EFI_LOADER default y + select LAST_STAGE_INIT help Indicates that this platform can support System Management BIOS (SMBIOS) tables. These provide various pieces of information about diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile index 0eb748ff1a..8d31fc61c6 100644 --- a/lib/efi_loader/Makefile +++ b/lib/efi_loader/Makefile @@ -79,7 +79,7 @@ obj-$(CONFIG_VIDEO) += efi_gop.o obj-$(CONFIG_BLK) += efi_disk.o obj-$(CONFIG_NETDEVICES) += efi_net.o obj-$(CONFIG_ACPI) += efi_acpi.o -obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += efi_smbios.o +obj-$(CONFIG_SMBIOS) += efi_smbios.o obj-$(CONFIG_EFI_RNG_PROTOCOL) += efi_rng.o obj-$(CONFIG_EFI_TCG2_PROTOCOL) += efi_tcg2.o obj-$(CONFIG_EFI_RISCV_BOOT_PROTOCOL) += efi_riscv.o diff --git a/lib/efi_loader/efi_setup.c b/lib/efi_loader/efi_setup.c index ad719afd63..e6de685e87 100644 --- a/lib/efi_loader/efi_setup.c +++ b/lib/efi_loader/efi_setup.c @@ -326,11 +326,11 @@ efi_status_t efi_init_obj_list(void) if (ret != EFI_SUCCESS) goto out; } -#ifdef CONFIG_GENERATE_SMBIOS_TABLE - ret = efi_smbios_register(); - if (ret != EFI_SUCCESS) - goto out; -#endif + if (IS_ENABLED(CONFIG_SMBIOS)) { + ret = efi_smbios_register(); + if (ret != EFI_SUCCESS) + goto out; + } ret = efi_watchdog_register(); if (ret != EFI_SUCCESS) goto out; diff --git a/lib/efi_loader/efi_smbios.c b/lib/efi_loader/efi_smbios.c index 306c0bc54f..48446f654d 100644 --- a/lib/efi_loader/efi_smbios.c +++ b/lib/efi_loader/efi_smbios.c @@ -10,8 +10,14 @@ #include #include #include +#include #include #include +#include + +enum { + TABLE_SIZE = SZ_4K, +}; /* * Install the SMBIOS table as a configuration table. @@ -20,36 +26,50 @@ */ efi_status_t efi_smbios_register(void) { - /* Map within the low 32 bits, to allow for 32bit SMBIOS tables */ - u64 dmi_addr = U32_MAX; + ulong addr; efi_status_t ret; - void *dmi; - /* Reserve 4kiB page for SMBIOS */ - ret = efi_allocate_pages(EFI_ALLOCATE_MAX_ADDRESS, - EFI_RUNTIME_SERVICES_DATA, 1, &dmi_addr); + addr = gd->arch.smbios_start; + if (!addr) { + log_err("No SMBIOS tables to install\n"); + return EFI_NOT_FOUND; + } + + /* Mark space used for tables */ + ret = efi_add_memory_map(addr, TABLE_SIZE, EFI_RUNTIME_SERVICES_DATA); + if (ret) + return ret; + + log_debug("EFI using SMBIOS tables at %lx\n", addr); + + /* Install SMBIOS information as configuration table */ + return efi_install_configuration_table(&smbios_guid, + map_sysmem(addr, 0)); +} + +static int install_smbios_table(void) +{ + ulong addr; + void *buf; - if (ret != EFI_SUCCESS) { - /* Could not find space in lowmem, use highmem instead */ - ret = efi_allocate_pages(EFI_ALLOCATE_ANY_PAGES, - EFI_RUNTIME_SERVICES_DATA, 1, - &dmi_addr); + if (!IS_ENABLED(CONFIG_GENERATE_SMBIOS_TABLE) || IS_ENABLED(CONFIG_X86)) + return 0; - if (ret != EFI_SUCCESS) - return ret; + /* Align the table to a 4KB boundary to keep EFI happy */ + buf = memalign(SZ_4K, TABLE_SIZE); + if (!buf) + return log_msg_ret("mem", -ENOMEM); + + addr = map_to_sysmem(buf); + if (!write_smbios_table(addr)) { + log_err("Failed to write SMBIOS table\n"); + return log_msg_ret("smbios", -EINVAL); } - /* - * Generate SMBIOS tables - we know that efi_allocate_pages() returns - * a 4k-aligned address, so it is safe to assume that - * write_smbios_table() will write the table at that address. - */ - assert(!(dmi_addr & 0xf)); - dmi = (void *)(uintptr_t)dmi_addr; - if (write_smbios_table(map_to_sysmem(dmi))) - /* Install SMBIOS information as configuration table */ - return efi_install_configuration_table(&smbios_guid, dmi); - efi_free_pages(dmi_addr, 1); - log_err("Cannot create SMBIOS table\n"); - return EFI_SUCCESS; + /* Make a note of where we put it */ + log_debug("SMBIOS tables written to %lx\n", addr); + gd->arch.smbios_start = addr; + + return 0; } +EVENT_SPY_SIMPLE(EVT_LAST_STAGE_INIT, install_smbios_table); diff --git a/test/py/tests/test_event_dump.py b/test/py/tests/test_event_dump.py index a6df9e10e5..e282c67335 100644 --- a/test/py/tests/test_event_dump.py +++ b/test/py/tests/test_event_dump.py @@ -18,6 +18,7 @@ def test_event_dump(u_boot_console): -------------------- ------------------------------ ------------------------------ EVT_FT_FIXUP bootmeth_vbe_ft_fixup .*boot/vbe_request.c:.* EVT_FT_FIXUP bootmeth_vbe_simple_ft_fixup .*boot/vbe_simple_os.c:.* +EVT_LAST_STAGE_INIT install_smbios_table .*lib/efi_loader/efi_smbios.c:.* EVT_MISC_INIT_F sandbox_early_getopt_check .*arch/sandbox/cpu/start.c:.* EVT_TEST h_adder_simple .*test/common/event.c:''' assert re.match(expect, out, re.MULTILINE) is not None