From: Simon Glass Date: Thu, 31 Dec 2020 16:52:13 +0000 (-0700) Subject: tpm: cr50: Add a better description and more debug X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=5372fc772ec0004297c080a0bd53f1871bd6b93a;p=u-boot.git tpm: cr50: Add a better description and more debug Update the TPM description to include the interrupt mechanicm since this is useful to know. Also add a warning if the TPM cannot be found and a debug line if it succeeds. Signed-off-by: Simon Glass --- diff --git a/drivers/tpm/cr50_i2c.c b/drivers/tpm/cr50_i2c.c index f53924a8fc..8b79240963 100644 --- a/drivers/tpm/cr50_i2c.c +++ b/drivers/tpm/cr50_i2c.c @@ -380,7 +380,6 @@ out_err: static int cr50_i2c_send(struct udevice *dev, const u8 *buf, size_t len) { struct cr50_priv *priv = dev_get_priv(dev); - int status; size_t burstcnt, limit, sent = 0; u8 tpm_go[4] = { TPM_STS_GO }; @@ -557,9 +556,23 @@ static int cr50_i2c_get_desc(struct udevice *dev, char *buf, int size) { struct dm_i2c_chip *chip = dev_get_parent_plat(dev); struct cr50_priv *priv = dev_get_priv(dev); + int len; + + len = snprintf(buf, size, "cr50 TPM 2.0 (i2c %02x id %x), ", + chip->chip_addr, priv->vendor >> 16); + if (priv->use_irq) { + len += snprintf(buf + len, size - len, "irq=%s/%ld", + priv->irq.dev->name, priv->irq.id); + } else if (dm_gpio_is_valid(&priv->ready_gpio)) { + len += snprintf(buf + len, size - len, "gpio=%s/%u", + priv->ready_gpio.dev->name, + priv->ready_gpio.offset); + } else { + len += snprintf(buf + len, size - len, "delay=%d", + TIMEOUT_NO_IRQ_US); + } - return snprintf(buf, size, "cr50 TPM 2.0 (i2c %02x id %x) irq=%d", - chip->chip_addr, priv->vendor >> 16, priv->use_irq); + return len; } static int cr50_i2c_open(struct udevice *dev) @@ -702,11 +715,12 @@ static int cr50_i2c_probe(struct udevice *dev) mdelay(10); } if (vendor != CR50_DID_VID) { - log_debug("DID_VID %08x not recognised\n", vendor); + log_warning("DID_VID %08x not recognised\n", vendor); return log_msg_ret("vendor-id", -EXDEV); } priv->vendor = vendor; priv->locality = -1; + log_debug("Cr50 ready\n"); return 0; }