From: Marek Vasut Date: Tue, 2 May 2017 18:27:42 +0000 (+0200) Subject: ARM: at91: ma5d4: Reset CAN controllers late X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=52a557d64c999400971419aed511b831c6a09ab9;p=u-boot.git ARM: at91: ma5d4: Reset CAN controllers late The CAN controllers need slight delay between toggling of their reset line. Move this action into board_init(), otherwise timer will not be initialized and the board might hang. Signed-off-by: Marek Vasut Cc: Andreas Bießmann --- diff --git a/board/aries/ma5d4evk/ma5d4evk.c b/board/aries/ma5d4evk/ma5d4evk.c index dd74e29b8e..aa02b8a34b 100644 --- a/board/aries/ma5d4evk/ma5d4evk.c +++ b/board/aries/ma5d4evk/ma5d4evk.c @@ -269,12 +269,6 @@ int board_early_init_f(void) at91_set_pio_output(AT91_PIO_PORTD, 29, 0); at91_set_pio_output(AT91_PIO_PORTD, 30, 0); - /* Reset CAN controllers */ - at91_set_pio_output(AT91_PIO_PORTB, 21, 0); - udelay(100); - at91_set_pio_output(AT91_PIO_PORTB, 21, 1); - at91_pio3_set_pio_pulldown(AT91_PIO_PORTB, 21, 0); - ma5d4evk_serial_hw_init(); return 0; @@ -305,6 +299,12 @@ int board_init(void) at91_udp_hw_init(); #endif + /* Reset CAN controllers */ + at91_set_pio_output(AT91_PIO_PORTB, 21, 0); + udelay(100); + at91_set_pio_output(AT91_PIO_PORTB, 21, 1); + at91_pio3_set_pio_pulldown(AT91_PIO_PORTB, 21, 0); + return 0; }