From: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Date: Wed, 27 Mar 2019 12:09:59 +0000 (+0530)
Subject: net: zynq_gem: Modify phy supported features after max-speed was set
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=51c019ff8cb530b96fca037dd5728cce255cb6e5;p=u-boot.git

net: zynq_gem: Modify phy supported features after max-speed was set

The phydev supported features were reset in phy_set_supported() so,
move the setting of driver supported features after this so that it
wont lost in phy_set_supported().

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 3bd0093b7a..94a04fe750 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -359,14 +359,15 @@ static int zynq_phy_init(struct udevice *dev)
 	if (!priv->phydev)
 		return -ENODEV;
 
-	priv->phydev->supported &= supported | ADVERTISED_Pause |
-				  ADVERTISED_Asym_Pause;
 	if (priv->max_speed) {
 		ret = phy_set_supported(priv->phydev, priv->max_speed);
 		if (ret)
 			return ret;
 	}
 
+	priv->phydev->supported &= supported | ADVERTISED_Pause |
+				  ADVERTISED_Asym_Pause;
+
 	priv->phydev->advertising = priv->phydev->supported;
 	priv->phydev->node = priv->phy_of_node;