From: Mathew McBride Date: Wed, 12 Apr 2023 07:38:28 +0000 (+0000) Subject: arm: dts: fsl-ls1088a: copy all missing bindings from Linux X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=51b9254e02dfd37c98592ad4ffc6e4b4c5a06db7;p=u-boot.git arm: dts: fsl-ls1088a: copy all missing bindings from Linux This is effectively: cp linux/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi \ u-boot/arch/arm/dts/fsl-ls1088a.dtsi Tested working with Ten64 board (LS1088A) booting openSUSE Tumbleweed. Signed-off-by: Mathew McBride Reviewed-by: Peng Fan Signed-off-by: Peng Fan Reviewed-by: Ioana Ciornei Tested-by: Ioana Ciornei # on LS1088A-RDB --- diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi index d5822520fb..e5fb137ac0 100644 --- a/arch/arm/dts/fsl-ls1088a.dtsi +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -1,18 +1,27 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * NXP ls1088a SOC common device tree source + * Device Tree Include file for NXP Layerscape-1088A family SoC. + * + * Copyright 2017-2020 NXP + * + * Harninder Rai * - * Copyright 2017, 2020-2021, 2023 NXP */ - #include #include +#include + / { compatible = "fsl,ls1088a"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; + aliases { + crypto = &crypto; + rtc1 = &ftm_alarm0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -121,12 +130,73 @@ }; }; + thermal-zones { + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + core_cluster_alert: core-cluster-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core-cluster-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + soc { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + + trips { + soc-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ - <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ - <1 11 0x8>, /* Virtual PPI, active-low */ - <1 10 0x8>; /* Hypervisor PPI, active-low */ + interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ + <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ + <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ + <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; }; sysclk: sysclk { @@ -136,6 +206,13 @@ clock-output-names = "sysclk"; }; + reboot { + compatible = "syscon-reboot"; + regmap = <&reset>; + offset = <0x0>; + mask = <0x02>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -150,13 +227,105 @@ clocks = <&sysclk>; }; - duart0: serial@21c0500 { - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0500 0x0 0x100>; + dcfg: dcfg@1e00000 { + compatible = "fsl,ls1088a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + little-endian; + }; + + reset: syscon@1e60000 { + compatible = "fsl,ls1088a-reset", "syscon"; + reg = <0x0 0x1e60000 0x0 0x10000>; + }; + + isc: syscon@1f70000 { + compatible = "fsl,ls1088a-isc", "syscon"; + reg = <0x0 0x1f70000 0x0 0x10000>; + little-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1f70000 0x10000>; + + extirq: interrupt-controller@14 { + compatible = "fsl,ls1088a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x14 4>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf 0x0>; + }; + }; + + sfp: efuse@1e80000 { + compatible = "fsl,ls1028a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; + clock-names = "sfp"; + }; + + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <0 23 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; + fsl,tmu-calibration = + /* Calibration data group 1 */ + <0x00000000 0x00000023 + 0x00000001 0x0000002a + 0x00000002 0x00000030 + 0x00000003 0x00000037 + 0x00000004 0x0000003d + 0x00000005 0x00000044 + 0x00000006 0x0000004a + 0x00000007 0x00000051 + 0x00000008 0x00000057 + 0x00000009 0x0000005e + 0x0000000a 0x00000064 + 0x0000000b 0x0000006b + /* Calibration data group 2 */ + 0x00010000 0x00000022 + 0x00010001 0x0000002a + 0x00010002 0x00000032 + 0x00010003 0x0000003a + 0x00010004 0x00000042 + 0x00010005 0x0000004a + 0x00010006 0x00000052 + 0x00010007 0x0000005a + 0x00010008 0x00000062 + 0x00010009 0x0000006a + /* Calibration data group 3 */ + 0x00020000 0x00000021 + 0x00020001 0x0000002b + 0x00020002 0x00000035 + 0x00020003 0x00000040 + 0x00020004 0x0000004a + 0x00020005 0x00000054 + 0x00020006 0x0000005e + /* Calibration data group 4 */ + 0x00030000 0x00000010 + 0x00030001 0x0000001c + 0x00030002 0x00000027 + 0x00030003 0x00000032 + 0x00030004 0x0000003e + 0x00030005 0x00000049 + 0x00030006 0x00000054 + 0x00030007 0x00000060>; + little-endian; + #thermal-sensor-cells = <1>; }; dspi: spi@2100000 { @@ -173,6 +342,15 @@ status = "disabled"; }; + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + duart1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0600 0x0 0x100>; @@ -582,6 +760,20 @@ ; }; + console@8340020 { + compatible = "fsl,dpaa2-console"; + reg = <0x00000000 0x08340020 0 0x2>; + }; + + ptp-timer@8b95000 { + compatible = "fsl,dpaa2-ptp"; + reg = <0x0 0x8b95000 0x0 0x100>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; + little-endian; + fsl,extts-fifo; + }; + emdio1: mdio@8b96000 { compatible = "fsl,fman-memac-mdio"; reg = <0x0 0x8b96000 0x0 0x1000>; @@ -682,6 +874,86 @@ }; }; + cluster1_core0_watchdog: wdt@c000000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + cluster1_core1_watchdog: wdt@c010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + cluster1_core2_watchdog: wdt@c020000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc020000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + cluster1_core3_watchdog: wdt@c030000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc030000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + cluster2_core0_watchdog: wdt@c100000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc100000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + cluster2_core1_watchdog: wdt@c110000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc110000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + cluster2_core2_watchdog: wdt@c120000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc120000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + cluster2_core3_watchdog: wdt@c130000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc130000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ @@ -754,10 +1026,26 @@ }; }; }; + + rcpm: power-controller@1e34040 { + compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x18>; + #fsl,rcpm-wakeup-cells = <6>; + little-endian; + }; + + ftm_alarm0: timer@2800000 { + compatible = "fsl,ls1088a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; + interrupts = ; + }; }; - psci { - compatible = "arm,psci-0.2"; - method = "smc"; + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; }; };