From: Simon Glass Date: Mon, 10 Dec 2018 17:37:30 +0000 (-0700) Subject: dm: sound: exynos: Correct codec bus addresses X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=51b06dc40bce0768c77a23fcfc4a5ed5537aa2bd;p=u-boot.git dm: sound: exynos: Correct codec bus addresses For snow the codec is at address 0x11 on the i2c bus, in 7-bit format. The device tree and code are in 8-bit format (i.e. shifted left one bit). Fix both. Fix pit in a similar way. Signed-off-by: Simon Glass --- diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts index e99f6e72bf..cb5067b966 100644 --- a/arch/arm/dts/exynos5250-snow.dts +++ b/arch/arm/dts/exynos5250-snow.dts @@ -214,8 +214,8 @@ }; }; - soundcodec@22 { - reg = <0x22>; + soundcodec@11 { + reg = <0x11>; compatible = "maxim,max98095-codec"; }; }; diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts index c86f9d9035..bd0a9c116d 100644 --- a/arch/arm/dts/exynos5420-peach-pit.dts +++ b/arch/arm/dts/exynos5420-peach-pit.dts @@ -69,10 +69,10 @@ i2c@12CD0000 { /* i2c7 */ clock-frequency = <100000>; - soundcodec@20 { - reg = <0x20>; - compatible = "maxim,max98090-codec"; - }; + soundcodec@10 { + reg = <0x10>; + compatible = "maxim,max98090-codec"; + }; edp-lvds-bridge@48 { compatible = "parade,ps8625"; diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts index 7498519d6c..239781b34b 100644 --- a/arch/arm/dts/exynos5800-peach-pi.dts +++ b/arch/arm/dts/exynos5800-peach-pi.dts @@ -81,10 +81,10 @@ i2c@12CD0000 { /* i2c7 */ clock-frequency = <100000>; - soundcodec@20 { - reg = <0x20>; - compatible = "maxim,max98090-codec"; - }; + soundcodec@10 { + reg = <0x10>; + compatible = "maxim,max98090-codec"; + }; }; sound@3830000 { diff --git a/drivers/sound/max98095.c b/drivers/sound/max98095.c index 6a98dac04b..7a3dbd0984 100644 --- a/drivers/sound/max98095.c +++ b/drivers/sound/max98095.c @@ -569,8 +569,7 @@ int max98095_init(const void *blob, enum en_max_audio_interface aif_id, i2c_set_bus_num(pcodec_info.i2c_bus); - /* shift the device address by 1 for 7 bit addressing */ - max98095_info.i2c_addr = pcodec_info.i2c_dev_addr >> 1; + max98095_info.i2c_addr = pcodec_info.i2c_dev_addr; ret = max98095_device_init(&max98095_info); if (ret < 0) { debug("%s: max98095 codec chip init failed\n", __func__);