From: Fabio Estevam Date: Thu, 19 Oct 2023 12:06:21 +0000 (-0300) Subject: arm: dts: imx8mm: Sync with linux-next 20231019 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=5037bd532d31894ac420038c8c4f82e1cd52f150;p=u-boot.git arm: dts: imx8mm: Sync with linux-next 20231019 Sync imx8mm.dtsi with linux-next 20231019. The motivation for doing this sync was a bug when doing "ums 0 mmc 1" on imx8mm-evk. It worked well for the first time, but after doing a CTRL+C and launching the ums again, the command did not work. Adam Ford suggested to sync imx8mm.dtsi with the Linux dts, as there was a recent USB power domain reorganization there. After syncing the imx8mm.dtsi with Linux, the ums command works without problem after a CTRL+C. Suggested-by: Adam Ford Signed-off-by: Fabio Estevam Acked-by: Tim Harvey --- diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi index afb90f59c8..738024baaa 100644 --- a/arch/arm/dts/imx8mm.dtsi +++ b/arch/arm/dts/imx8mm.dtsi @@ -139,6 +139,7 @@ A53_L2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; @@ -276,6 +277,7 @@ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; clock-names = "main_clk"; + power-domains = <&pgc_otg1>; }; usbphynop2: usbphynop2 { @@ -285,6 +287,7 @@ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; clock-names = "main_clk"; + power-domains = <&pgc_otg2>; }; soc: soc@0 { @@ -396,6 +399,7 @@ "pll8k", "pll11k", "clkext3"; dmas = <&sdma2 24 25 0x80000000>; dma-names = "rx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -493,6 +497,8 @@ compatible = "fsl,imx8mm-tmu"; reg = <0x30260000 0x10000>; clocks = <&clk IMX8MM_CLK_TMU_ROOT>; + nvmem-cells = <&tmu_calib>; + nvmem-cell-names = "calib"; #thermal-sensor-cells = <0>; }; @@ -547,8 +553,8 @@ reg = <0x30330000 0x10000>; }; - gpr: iomuxc-gpr@30340000 { - compatible = "fsl,imx8mm-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; + gpr: syscon@30340000 { + compatible = "fsl,imx8mm-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; @@ -560,22 +566,40 @@ #address-cells = <1>; #size-cells = <1>; - imx8mm_uid: unique-id@410 { + /* + * The register address below maps to the MX8M + * Fusemap Description Table entries this way. + * Assuming + * reg = ; + * then + * Fuse Address = (ADDR * 4) + 0x400 + * Note that if SIZE is greater than 4, then + * each subsequent fuse is located at offset + * +0x10 in Fusemap Description Table (e.g. + * reg = <0x4 0x8> describes fuses 0x410 and + * 0x420). + */ + imx8mm_uid: unique-id@4 { /* 0x410-0x420 */ reg = <0x4 0x8>; }; - cpu_speed_grade: speed-grade@10 { + cpu_speed_grade: speed-grade@10 { /* 0x440 */ reg = <0x10 4>; }; - fec_mac_address: mac-address@90 { + tmu_calib: calib@3c { /* 0x4f0 */ + reg = <0x3c 4>; + }; + + fec_mac_address: mac-address@90 { /* 0x640 */ reg = <0x90 6>; }; }; - anatop: anatop@30360000 { - compatible = "fsl,imx8mm-anatop", "syscon"; + anatop: clock-controller@30360000 { + compatible = "fsl,imx8mm-anatop"; reg = <0x30360000 0x10000>; + #clock-cells = <1>; }; snvs: snvs@30370000 { @@ -674,13 +698,11 @@ pgc_otg1: power-domain@2 { #power-domain-cells = <0>; reg = ; - power-domains = <&pgc_hsiomix>; }; pgc_otg2: power-domain@3 { #power-domain-cells = <0>; reg = ; - power-domains = <&pgc_hsiomix>; }; pgc_gpumix: power-domain@4 { @@ -1098,6 +1120,61 @@ #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; + lcdif: lcdif@32e00000 { + compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif"; + reg = <0x32e00000 0x10000>; + clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, + <&clk IMX8MM_CLK_DISP_AXI>, + <&clk IMX8MM_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>, + <&clk IMX8MM_SYS_PLL2_1000M>, + <&clk IMX8MM_SYS_PLL1_800M>; + assigned-clock-rates = <594000000>, <500000000>, <200000000>; + interrupts = ; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>; + status = "disabled"; + + port { + lcdif_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif>; + }; + }; + }; + + mipi_dsi: dsi@32e10000 { + compatible = "fsl,imx8mm-mipi-dsim"; + reg = <0x32e10000 0x400>; + clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, + <&clk IMX8MM_CLK_24M>; + assigned-clock-rates = <266000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = ; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif: endpoint { + remote-endpoint = <&lcdif_to_dsim>; + }; + }; + }; + }; + csi: csi@32e20000 { compatible = "fsl,imx8mm-csi", "fsl,imx7-csi"; reg = <0x32e20000 0x1000>; @@ -1145,10 +1222,9 @@ compatible = "fsl,imx8mm-mipi-csi2"; reg = <0x32e30000 0x1000>; interrupts = ; - assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>, - <&clk IMX8MM_CLK_CSI1_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>, - <&clk IMX8MM_SYS_PLL2_1000M>; + assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>; + clock-frequency = <333000000>; clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, <&clk IMX8MM_CLK_CSI1_ROOT>, @@ -1177,7 +1253,7 @@ }; usbotg1: usb@32e40000 { - compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x32e40000 0x200>; interrupts = ; clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; @@ -1186,18 +1262,19 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; phys = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; - power-domains = <&pgc_otg1>; + power-domains = <&pgc_hsiomix>; status = "disabled"; }; usbmisc1: usbmisc@32e40200 { - compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc", + "fsl,imx6q-usbmisc"; #index-cells = <1>; reg = <0x32e40200 0x200>; }; usbotg2: usb@32e50000 { - compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x32e50000 0x200>; interrupts = ; clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; @@ -1206,12 +1283,13 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; phys = <&usbphynop2>; fsl,usbmisc = <&usbmisc2 0>; - power-domains = <&pgc_otg2>; + power-domains = <&pgc_hsiomix>; status = "disabled"; }; usbmisc2: usbmisc@32e50200 { - compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc", + "fsl,imx6q-usbmisc"; #index-cells = <1>; reg = <0x32e50200 0x200>; }; @@ -1238,16 +1316,15 @@ , , ; - interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; #dma-cells = <1>; dma-channels = <4>; clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; }; - gpmi: nand-controller@33002000{ + gpmi: nand-controller@33002000 { compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = ; @@ -1268,8 +1345,8 @@ #size-cells = <2>; device_type = "pci"; bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */ - 0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */ + <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ num-lanes = <1>; num-viewport = <4>; interrupts = ; @@ -1282,12 +1359,40 @@ <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; linux,pci-domain = <0>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, + <&clk IMX8MM_CLK_PCIE1_PHY>, + <&clk IMX8MM_CLK_PCIE1_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "apps", "turnoff"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + status = "disabled"; + }; + + pcie0_ep: pcie-ep@33800000 { + compatible = "fsl,imx8mm-pcie-ep"; + reg = <0x33800000 0x400000>, + <0x18000000 0x8000000>; + reg-names = "dbi", "addr_space"; + num-lanes = <1>; + interrupts = ; + interrupt-names = "dma"; + fsl,max-link-speed = <2>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, + <&clk IMX8MM_CLK_PCIE1_PHY>, + <&clk IMX8MM_CLK_PCIE1_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; power-domains = <&pgc_pcie>; resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; reset-names = "apps", "turnoff"; phys = <&pcie_phy>; phy-names = "pcie-phy"; + num-ib-windows = <4>; + num-ob-windows = <4>; status = "disabled"; };