From: Marek Vasut Date: Tue, 10 Nov 2015 19:53:18 +0000 (+0100) Subject: eeprom: Shuffle code around X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4f296d09e13c04a7bca38f6cf1150b9417d054d4;p=u-boot.git eeprom: Shuffle code around Just move the code around so that the forward declarations are not necessary. Also zap a few checkpatch issues where applicable and zap the use of #ifdef CONFIG_CMD_EEPROM in the code, since this is always true. Signed-off-by: Marek Vasut Cc: Simon Glass Cc: Tom Rini Cc: Heiko Schocher Reviewed-by: Heiko Schocher --- diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index e9904cd698..4335079d56 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -25,94 +25,55 @@ #include #include -extern void eeprom_init (void); -extern int eeprom_read (unsigned dev_addr, unsigned offset, - uchar *buffer, unsigned cnt); -extern int eeprom_write (unsigned dev_addr, unsigned offset, - uchar *buffer, unsigned cnt); -#if defined(CONFIG_SYS_EEPROM_WREN) -extern int eeprom_write_enable (unsigned dev_addr, int state); +#ifndef CONFIG_SYS_I2C_SPEED +#define CONFIG_SYS_I2C_SPEED 50000 #endif - +/* Maximum number of times to poll for acknowledge after write */ #if defined(CONFIG_SYS_EEPROM_X40430) - /* Maximum number of times to poll for acknowledge after write */ #define MAX_ACKNOWLEDGE_POLLS 10 #endif -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_CMD_EEPROM) -static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - const char *const fmt = - "\nEEPROM @0x%lX %s: addr %08lx off %04lx count %ld ... "; - -#if defined(CONFIG_SYS_I2C_MULTI_EEPROMS) - if (argc == 6) { - ulong dev_addr = simple_strtoul (argv[2], NULL, 16); - ulong addr = simple_strtoul (argv[3], NULL, 16); - ulong off = simple_strtoul (argv[4], NULL, 16); - ulong cnt = simple_strtoul (argv[5], NULL, 16); -#else - if (argc == 5) { - ulong dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR; - ulong addr = simple_strtoul (argv[2], NULL, 16); - ulong off = simple_strtoul (argv[3], NULL, 16); - ulong cnt = simple_strtoul (argv[4], NULL, 16); -#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */ - -# if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C) - eeprom_init (); -# endif /* !CONFIG_SPI */ - - if (strcmp (argv[1], "read") == 0) { - int rcode; - - printf (fmt, dev_addr, argv[1], addr, off, cnt); - - rcode = eeprom_read (dev_addr, off, (uchar *) addr, cnt); - - puts ("done\n"); - return rcode; - } else if (strcmp (argv[1], "write") == 0) { - int rcode; - - printf (fmt, dev_addr, argv[1], addr, off, cnt); - - rcode = eeprom_write (dev_addr, off, (uchar *) addr, cnt); - - puts ("done\n"); - return rcode; - } - } - - return CMD_RET_USAGE; -} -#endif - -/*----------------------------------------------------------------------- - * +/* * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is * 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM. * * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is * 0x00000nxx for EEPROM address selectors and page number at n. */ - #if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C) -#if !defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1 || CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2 +#if !defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || \ + (CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1) || \ + (CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2) #error CONFIG_SYS_I2C_EEPROM_ADDR_LEN must be 1 or 2 #endif #endif +#if defined(CONFIG_SYS_EEPROM_WREN) +extern int eeprom_write_enable (unsigned dev_addr, int state); +#endif + +void eeprom_init(void) +{ + /* SPI EEPROM */ +#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) + spi_init_f (); +#endif + + /* I2C EEPROM */ +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif +} + int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt) { unsigned end = offset + cnt; unsigned blk_off; int rcode = 0; - /* Read data until done or would cross a page boundary. + /* + * Read data until done or would cross a page boundary. * We must write the address again when changing pages * because the next page may be in a different device. */ @@ -174,15 +135,6 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt return rcode; } -/*----------------------------------------------------------------------- - * - * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is - * 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM. - * - * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is - * 0x00000nxx for EEPROM address selectors and page number at n. - */ - int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt) { unsigned end = offset + cnt; @@ -200,7 +152,8 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn #if defined(CONFIG_SYS_EEPROM_WREN) eeprom_write_enable (dev_addr,1); #endif - /* Write data until done or would cross a write page boundary. + /* + * Write data until done or would cross a write page boundary. * We must write the address again when changing pages * because the address counter only increments within a page. */ @@ -363,8 +316,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn } #if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C) -int -eeprom_probe (unsigned dev_addr, unsigned offset) +int eeprom_probe(unsigned dev_addr, unsigned offset) { unsigned char chip; @@ -382,30 +334,52 @@ eeprom_probe (unsigned dev_addr, unsigned offset) } #endif -/*----------------------------------------------------------------------- - * Set default values - */ -#ifndef CONFIG_SYS_I2C_SPEED -#define CONFIG_SYS_I2C_SPEED 50000 -#endif - -void eeprom_init (void) +static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { + const char *const fmt = + "\nEEPROM @0x%lX %s: addr %08lx off %04lx count %ld ... "; -#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) - spi_init_f (); -#endif -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif -} +#if defined(CONFIG_SYS_I2C_MULTI_EEPROMS) + if (argc == 6) { + ulong dev_addr = simple_strtoul (argv[2], NULL, 16); + ulong addr = simple_strtoul (argv[3], NULL, 16); + ulong off = simple_strtoul (argv[4], NULL, 16); + ulong cnt = simple_strtoul (argv[5], NULL, 16); +#else + if (argc == 5) { + ulong dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR; + ulong addr = simple_strtoul (argv[2], NULL, 16); + ulong off = simple_strtoul (argv[3], NULL, 16); + ulong cnt = simple_strtoul (argv[4], NULL, 16); +#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */ -/*----------------------------------------------------------------------- - */ +# if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C) + eeprom_init (); +# endif /* !CONFIG_SPI */ -/***************************************************/ + if (strcmp (argv[1], "read") == 0) { + int rcode; + + printf (fmt, dev_addr, argv[1], addr, off, cnt); -#if defined(CONFIG_CMD_EEPROM) + rcode = eeprom_read (dev_addr, off, (uchar *) addr, cnt); + + puts ("done\n"); + return rcode; + } else if (strcmp (argv[1], "write") == 0) { + int rcode; + + printf (fmt, dev_addr, argv[1], addr, off, cnt); + + rcode = eeprom_write (dev_addr, off, (uchar *) addr, cnt); + + puts ("done\n"); + return rcode; + } + } + + return CMD_RET_USAGE; +} #ifdef CONFIG_SYS_I2C_MULTI_EEPROMS U_BOOT_CMD( @@ -424,5 +398,3 @@ U_BOOT_CMD( " - read/write `cnt' bytes at EEPROM offset `off'" ) #endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */ - -#endif