From: Manorit Chawdhry Date: Fri, 29 Dec 2023 10:46:32 +0000 (+0530) Subject: docs: board: ti: k3: Cleanup FIT signature documentation X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4ebb8ae0405c244417dd3538360c527d2bbd5476;p=u-boot.git docs: board: ti: k3: Cleanup FIT signature documentation The previous documentation had been very crude so refactor it to make it cleaner and concise. Signed-off-by: Manorit Chawdhry --- diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst index f19ee56f29..1064c21b5a 100644 --- a/doc/board/ti/k3.rst +++ b/doc/board/ti/k3.rst @@ -248,6 +248,8 @@ Building tiboot3.bin the final `tiboot3.bin` binary. (or the `sysfw.itb` if your device uses the split binary flow) +.. _k3_rst_include_start_build_steps_spl_r5: + .. k3_rst_include_start_build_steps_spl_r5 .. prompt:: bash $ @@ -312,6 +314,8 @@ use the `lite` option. finished, we can jump back into U-Boot again, this time running on a 64bit core in the main domain. +.. _k3_rst_include_start_build_steps_uboot: + .. k3_rst_include_start_build_steps_uboot .. prompt:: bash $ @@ -337,144 +341,212 @@ wakeup and main domain and to boot to the U-Boot prompt | `tispl.bin` for HS devices or `tispl.bin_unsigned` for GP devices | `u-boot.img` for HS devices or `u-boot.img_unsigned` for GP devices -Fit Signature Signing +FIT signature signing --------------------- -K3 Platforms have fit signature signing enabled by default on their primary -platforms. Here we'll take an example for creating fit image for J721e platform +K3 platforms have FIT signature signing enabled by default on their primary +platforms. Here we'll take an example for creating FIT Image for J721E platform and the same can be extended to other platforms -1. Describing FIT source +Pre-requisites: + +* U-boot build (:ref:`U-boot build `) +* Linux Image and Linux DTB prebuilt + +Describing FIT source +^^^^^^^^^^^^^^^^^^^^^ - .. code-block:: bash +FIT Image is a packed structure containing binary blobs and configurations. +The Kernel FIT Image that we have has Kernel Image, DTB and the DTBOs. It +supports packing multiple images and configurations that allow you to +choose any configuration at runtime to boot from. + +.. code-block:: /dts-v1/; / { - description = "Kernel fitImage for j721e-hs-evm"; - #address-cells = <1>; - - images { - kernel-1 { - description = "Linux kernel"; - data = /incbin/("Image"); - type = "kernel"; - arch = "arm64"; - os = "linux"; - compression = "none"; - load = <0x80080000>; - entry = <0x80080000>; - hash-1 { - algo = "sha512"; - }; - - }; - fdt-ti_k3-j721e-common-proc-board.dtb { - description = "Flattened Device Tree blob"; - data = /incbin/("k3-j721e-common-proc-board.dtb"); - type = "flat_dt"; - arch = "arm64"; - compression = "none"; - load = <0x83000000>; - hash-1 { - algo = "sha512"; - }; - - }; + description = "FIT Image description"; + #address-cells = <1>; + + images { + [image-1] + [image-2] + [fdt-1] + [fdt-2] + } + + configurations { + default = + [conf-1: image-1,fdt-1] + [conf-2: image-2,fdt-1] + } + } + +* Sample Images + +.. code-block:: + + kernel-1 { + description = "Linux kernel"; + data = /incbin/("linux.bin"); + type = "kernel"; + arch = "arm64"; + os = "linux"; + compression = "gzip"; + load = <0x81000000>; + entry = <0x81000000>; + hash-1 { + algo = "sha512"; }; - - configurations { - default = "conf-ti_k3-j721e-common-proc-board.dtb"; - conf-ti_k3-j721e-common-proc-board.dtb { - description = "Linux kernel, FDT blob"; - fdt = "fdt-ti_k3-j721e-common-proc-board.dtb"; - kernel = "kernel-1"; - signature-1 { - algo = "sha512,rsa4096"; - key-name-hint = "custMpk"; - sign-images = "kernel", "fdt"; - }; - }; + }; + fdt-ti_k3-j721e-common-proc-board.dtb { + description = "Flattened Device Tree blob"; + data = /incbin/("arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb"); + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + load = <0x83000000>; + hash-1 { + algo = "sha512"; }; }; + # Optional images + fdt-ti_k3-j721e-evm-virt-mac-client.dtbo { + description = "Flattened Device Tree blob"; + data = /incbin/("arch/arm64/boot/dts/ti/k3-j721e-evm-virt-mac-client.dtbo"); + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + load = <0x83080000>; + hash-1 { + algo = "sha512"; + }; + }; + +.. note:: + + Change the path in data variables to point to the respective files in your + local machine. For e.g change "linux.bin" to "". - You would require to change the '/incbin/' lines to point to the respective - files in your local machine and the key-name-hint also needs to be changed - if you are using some other key other than the TI dummy key that we are - using for this example. +For enabling usage of FIT signature, add the signature node to the +corresponding configuration node as follows. -2. Compile U-boot for the respective board +* Sample Configurations -.. include:: k3.rst - :start-after: .. k3_rst_include_start_build_steps_uboot - :end-before: .. k3_rst_include_end_build_steps_uboot +.. code-block:: + + conf-ti_k3-j721e-common-proc-board.dtb { + description = "Linux kernel, FDT blob"; + fdt = "fdt-ti_k3-j721e-common-proc-board.dtb"; + kernel = "kernel-1"; + signature-1 { + algo = "sha512,rsa4096"; + key-name-hint = "custMpk"; + sign-images = "kernel", "fdt"; + }; + }; + # Optional configurations + conf-ti_k3-j721e-evm-virt-mac-client.dtbo { + description = "FDTO blob"; + fdt = "fdt-ti_k3-j721e-evm-virt-mac-client.dtbo"; + + signature-1 { + algo = "sha512,rsa4096"; + key-name-hint = "custMpk"; + sign-images = "fdt"; + }; + }; + +Specify all images you need the signature to authenticate as a part of +sign-images. The key-name-hint needs to be changed if you are using some +other key other than the TI dummy key that we are using for this example. +It should be the name of the file containing the keys. .. note:: - The changes only affect a72 binaries so the example just builds that + Generating new set of keys: + + .. prompt:: bash $ -3. Sign the fit image and embed the dtb in uboot + mkdir keys + openssl genpkey -algorithm RSA -out keys/dev.key \ + -pkeyopt rsa_keygen_bits:4096 -pkeyopt rsa_keygen_pubexp:65537 + openssl req -batch -new -x509 -key keys/dev.key -out keys/dev.crt - Now once the build is done, you'll have a dtb for your board that you'll - be passing to mkimage for signing the fitImage and embedding the key in - the u-boot dtb. +Generating the fitImage +^^^^^^^^^^^^^^^^^^^^^^^ - .. prompt:: bash $ +.. note:: + + For signing a secondary platform like SK boards, you'll require + additional steps + + - Change the CONFIG_DEFAULT_DEVICE_TREE - mkimage -r -f fitImage.its -k $UBOOT_PATH/board/ti/keys -K - $UBOOT_PATH/build/a72/dts/dt.dtb + For e.g - For signing a secondary platform, pass the -K parameter to that DTB + .. code-block:: - .. prompt:: bash $ + diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig + index a5c1df7e0054..6d0126d955ef 100644 + --- a/configs/j721e_evm_a72_defconfig + +++ b/configs/j721e_evm_a72_defconfig + @@ -13,7 +13,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 + CONFIG_ENV_SIZE=0x20000 + CONFIG_DM_GPIO=y + CONFIG_SPL_DM_SPI=y + -CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-common-proc-board" + +CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-sk" + CONFIG_SPL_TEXT_BASE=0x80080000 + CONFIG_DM_RESET=y + CONFIG_SPL_MMC=y - mkimage -f fitImage.its -k $UBOOT_PATH/board/ti/keys -K - $UBOOT_PATH/build/a72/arch/arm/dts/k3-j721e-sk.dtb + - Change the binman nodes to package u-boot.dtb for the correct set of platform - .. note:: + For e.g - If changing `CONFIG_DEFAULT_DEVICE_TREE` to the secondary platform, - binman changes would also be required so that correct dtb gets packaged. + .. code-block:: - .. code-block:: bash + diff --git a/arch/arm/dts/k3-j721e-binman.dtsi b/arch/arm/dts/k3-j721e-binman.dtsi + index 673be646b1e3..752fa805fe8d 100644 + --- a/arch/arm/dts/k3-j721e-binman.dtsi + +++ b/arch/arm/dts/k3-j721e-binman.dtsi + @@ -299,8 +299,8 @@ + #define SPL_J721E_SK_DTB "spl/dts/k3-j721e-sk.dtb" - diff --git a/arch/arm/dts/k3-j721e-binman.dtsi b/arch/arm/dts/k3-j721e-binman.dtsi - index 673be646b1e3..752fa805fe8d 100644 - --- a/arch/arm/dts/k3-j721e-binman.dtsi - +++ b/arch/arm/dts/k3-j721e-binman.dtsi - @@ -299,8 +299,8 @@ - #define SPL_J721E_SK_DTB "spl/dts/k3-j721e-sk.dtb" + #define UBOOT_NODTB "u-boot-nodtb.bin" + -#define J721E_EVM_DTB "u-boot.dtb" + -#define J721E_SK_DTB "arch/arm/dts/k3-j721e-sk.dtb" + +#define J721E_EVM_DTB "arch/arm/dts/k3-j721e-common-proc-board.dtb" + +#define J721E_SK_DTB "u-boot.dtb" - #define UBOOT_NODTB "u-boot-nodtb.bin" - -#define J721E_EVM_DTB "u-boot.dtb" - -#define J721E_SK_DTB "arch/arm/dts/k3-j721e-sk.dtb" - +#define J721E_EVM_DTB "arch/arm/dts/k3-j721e-common-proc-board.dtb" - +#define J721E_SK_DTB "u-boot.dtb" +This step will embed the public key in the u-boot.dtb file that was already +built during the initial u-boot build. -5. Rebuilt u-boot +.. prompt:: bash $ - This is required so that the modified dtb gets updated in u-boot.img + mkimage -r -f fitImage.its -k $UBOOT_PATH/board/ti/keys -K $UBOOT_PATH/build/$ARMV8/dts/dt.dtb fitImage -.. include:: k3.rst - :start-after: .. k3_rst_include_start_build_steps_uboot - :end-before: .. k3_rst_include_end_build_steps_uboot +.. note:: -6. (Optional) Enabled FIT_SIGNATURE_ENFORCED + If you have another set of keys then change the -k argument to point to + the folder where your keys are present, the build requires the presence + of both .key and .crt file. - By default u-boot will boot up the fit image without any authentication as - such if the public key is not embedded properly, to check if the public key - nodes are proper you can enable FIT_SIGNATURE_ENFORCED that would not rely - on the dtb for anything else then the signature node for checking the fit - image, rest other things will be enforced such as the property of - required-keys. This is not an extensive check so do manual checks also +Build u-boot again +^^^^^^^^^^^^^^^^^^ - This is by default enabled for devices with TI_SECURE_DEVICE enabled. +The updated u-boot.dtb needs to be packed in u-boot.img for authentication +so rebuild U-boot ARMV8 without changing any parameters. +Refer (:ref:`U-boot ARMV8 build `) .. note:: - The devices now also have distroboot enabled so if the fit image doesn't - work then the fallback to normal distroboot will be there on hs devices, - this will need to be explicitly disabled by changing the boot_targets. + The devices now also have distroboot enabled so if the FIT image doesn't + work then the fallback to normal distroboot will be there on HS devices. + This will need to be explicitly disabled by changing the boot_targets to + disallow fallback during testing. Saving environment ------------------