From: Caleb Connolly Date: Tue, 5 Dec 2023 13:46:47 +0000 (+0000) Subject: button: qcom-pmic: introduce Qualcomm PMIC button driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4e8aa0065d4bb15d039bb629dc8659bf97ef7cf0;p=u-boot.git button: qcom-pmic: introduce Qualcomm PMIC button driver Qualcomm PMICs include a "pon" function which handles two buttons, the power button and "resin" button (usually volume down). Introduce a new driver following upstream Linux DT to enable these and map them to Enter and Down respectively to enable use in boot menus. Reviewed-by: Neil Armstrong Reviewed-by: Sumit Garg Tested-by: Sumit Garg Reviewed-by: Simon Glass Signed-off-by: Caleb Connolly --- diff --git a/MAINTAINERS b/MAINTAINERS index b5ff934929..da477a4e6a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -575,6 +575,7 @@ M: Neil Armstrong R: Sumit Garg S: Maintained F: arch/arm/mach-snapdragon/ +F: drivers/button/button-qcom-pmic.c F: drivers/clk/qcom/ F: drivers/gpio/msm_gpio.c F: drivers/mmc/msm_sdhci.c diff --git a/drivers/button/Kconfig b/drivers/button/Kconfig index 8ce2de37d6..097b05f822 100644 --- a/drivers/button/Kconfig +++ b/drivers/button/Kconfig @@ -27,4 +27,13 @@ config BUTTON_GPIO The GPIO driver must used driver model. Buttons are configured using the device tree. +config BUTTON_QCOM_PMIC + bool "Qualcomm power button" + depends on BUTTON + depends on PMIC_QCOM + help + Enable support for the power and "resin" (usually volume down) buttons + on Qualcomm SoCs. These will be configured as the Enter and Down keys + respectively, allowing navigation of bootmenu with buttons on device. + endmenu diff --git a/drivers/button/Makefile b/drivers/button/Makefile index bbd18af149..68555081a4 100644 --- a/drivers/button/Makefile +++ b/drivers/button/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_BUTTON) += button-uclass.o obj-$(CONFIG_BUTTON_ADC) += button-adc.o obj-$(CONFIG_BUTTON_GPIO) += button-gpio.o +obj-$(CONFIG_BUTTON_QCOM_PMIC) += button-qcom-pmic.o \ No newline at end of file diff --git a/drivers/button/button-qcom-pmic.c b/drivers/button/button-qcom-pmic.c new file mode 100644 index 0000000000..34a976d1e6 --- /dev/null +++ b/drivers/button/button-qcom-pmic.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Qualcomm generic pmic gpio driver + * + * (C) Copyright 2015 Mateusz Kulikowski + * (C) Copyright 2023 Linaro Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_TYPE 0x4 +#define REG_SUBTYPE 0x5 + +struct qcom_pmic_btn_priv { + u32 base; + u32 status_bit; + int code; + struct udevice *pmic; +}; + +#define PON_INT_RT_STS 0x10 +#define KPDPWR_ON_INT_BIT 0 +#define RESIN_ON_INT_BIT 1 + +#define NODE_IS_PWRKEY(node) (!strncmp(ofnode_get_name(node), "pwrkey", strlen("pwrkey"))) +#define NODE_IS_RESIN(node) (!strncmp(ofnode_get_name(node), "resin", strlen("resin"))) + +static enum button_state_t qcom_pwrkey_get_state(struct udevice *dev) +{ + struct qcom_pmic_btn_priv *priv = dev_get_priv(dev); + + int reg = pmic_reg_read(priv->pmic, priv->base + PON_INT_RT_STS); + + if (reg < 0) + return 0; + + return (reg & BIT(priv->status_bit)) != 0; +} + +static int qcom_pwrkey_get_code(struct udevice *dev) +{ + struct qcom_pmic_btn_priv *priv = dev_get_priv(dev); + + return priv->code; +} + +static int qcom_pwrkey_probe(struct udevice *dev) +{ + struct button_uc_plat *uc_plat = dev_get_uclass_plat(dev); + struct qcom_pmic_btn_priv *priv = dev_get_priv(dev); + ofnode node = dev_ofnode(dev); + int ret; + u64 base; + + /* Ignore the top-level pon node */ + if (!uc_plat->label) + return 0; + + /* the pwrkey and resin nodes are children of the "pon" node, get the + * PMIC device to use in pmic_reg_* calls. + */ + priv->pmic = dev->parent->parent; + + /* Get the address of the parent pon node */ + base = dev_read_addr(dev->parent); + if (base == FDT_ADDR_T_NONE) { + printf("%s: Can't find address\n", dev->name); + return -EINVAL; + } + + priv->base = base; + + /* Do a sanity check */ + ret = pmic_reg_read(priv->pmic, priv->base + REG_TYPE); + if (ret != 0x1 && ret != 0xb) { + printf("%s: unexpected PMIC function type %d\n", dev->name, ret); + return -ENXIO; + } + + ret = pmic_reg_read(priv->pmic, priv->base + REG_SUBTYPE); + if ((ret & 0x7) == 0) { + printf("%s: unexpected PMCI function subtype %d\n", dev->name, ret); + return -ENXIO; + } + + if (NODE_IS_PWRKEY(node)) { + priv->status_bit = 0; + priv->code = KEY_ENTER; + } else if (NODE_IS_RESIN(node)) { + priv->status_bit = 1; + priv->code = KEY_DOWN; + } else { + /* Should not get here! */ + printf("Invalid pon node '%s' should be 'pwrkey' or 'resin'\n", + ofnode_get_name(node)); + return -EINVAL; + } + + return 0; +} + +static int button_qcom_pmic_bind(struct udevice *parent) +{ + struct udevice *dev; + ofnode node; + int ret; + + dev_for_each_subnode(node, parent) { + struct button_uc_plat *uc_plat; + const char *label; + + if (!ofnode_is_enabled(node)) + continue; + + ret = device_bind_driver_to_node(parent, "qcom_pwrkey", + ofnode_get_name(node), + node, &dev); + if (ret) { + printf("Failed to bind %s! %d\n", label, ret); + return ret; + } + uc_plat = dev_get_uclass_plat(dev); + if (NODE_IS_PWRKEY(node)) { + uc_plat->label = "pwrkey"; + } else if (NODE_IS_RESIN(node)) { + uc_plat->label = "vol_down"; + } else { + printf("Unknown button node '%s' should be 'pwrkey' or 'resin'\n", + ofnode_get_name(node)); + device_unbind(dev); + } + } + + return 0; +} + +static const struct button_ops button_qcom_pmic_ops = { + .get_state = qcom_pwrkey_get_state, + .get_code = qcom_pwrkey_get_code, +}; + +static const struct udevice_id qcom_pwrkey_ids[] = { + { .compatible = "qcom,pm8916-pon" }, + { .compatible = "qcom,pm8941-pon" }, + { .compatible = "qcom,pm8998-pon" }, + { } +}; + +U_BOOT_DRIVER(qcom_pwrkey) = { + .name = "qcom_pwrkey", + .id = UCLASS_BUTTON, + .of_match = qcom_pwrkey_ids, + .bind = button_qcom_pmic_bind, + .probe = qcom_pwrkey_probe, + .ops = &button_qcom_pmic_ops, + .priv_auto = sizeof(struct qcom_pmic_btn_priv), +};