From: Chris Packham Date: Thu, 11 Apr 2019 10:22:53 +0000 (+1200) Subject: arm: mvebu: Add DB-XC3-24G4XG board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4db944ab44a7bc8b495eece6afb124c632b02ef5;p=u-boot.git arm: mvebu: Add DB-XC3-24G4XG board The DB-XC3-24G4XG is a switch development board from Marvell. It can either use and external CPU card such as the db-88f6820-amc or the internal CPU that is integrated into the switch. Add support for running U-Boot on the internal CPU and enable the USB, SPI and NAND peripherals. For now this needs the bin_hdr from the Marvell U-Boot for this board. Signed-off-by: Chris Packham Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 86a01c2c70..524c1ee0db 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -151,7 +151,8 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-xp-theadorable.dtb \ armada-38x-controlcenterdc.dtb \ armada-385-atl-x530.dtb \ - armada-385-atl-x530DP.dtb + armada-385-atl-x530DP.dtb \ + armada-xp-db-xc3-24g4xg.dtb dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \ uniphier-ld11-global.dtb \ diff --git a/arch/arm/dts/armada-xp-98dx3236.dtsi b/arch/arm/dts/armada-xp-98dx3236.dtsi new file mode 100644 index 0000000000..5df1d1848d --- /dev/null +++ b/arch/arm/dts/armada-xp-98dx3236.dtsi @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Marvell 98dx3236 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Contains definitions specific to the 98dx3236 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-370-xp.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + + model = "Marvell 98DX3236 SoC"; + compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,98dx3236-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; + clock-latency = <1000000>; + }; + }; + + soc { + compatible = "marvell,armadaxp-mbus", "simple-bus"; + + ranges = ; + + bootrom { + compatible = "marvell,bootrom"; + reg = ; + }; + + /* + * 98DX3236 has 1 x1 PCIe unit Gen2.0 + */ + pciec: pcie@82000000 { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; + + pcie1: pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + }; + + internal-regs { + sdramc: sdramc@1400 { + compatible = "marvell,armada-xp-sdram-controller"; + reg = <0x1400 0x500>; + }; + + L2: l2-cache@8000 { + compatible = "marvell,aurora-system-cache"; + reg = <0x08000 0x1000>; + cache-id-part = <0x100>; + cache-level = <2>; + cache-unified; + wt-override; + }; + + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + + /* does not exist */ + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + status = "disabled"; + }; + + gpio2: gpio@18180 { /* rework some properties */ + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <1>; /* only gpio #32 */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <87>; + }; + + systemc: system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0x18200 0x500>; + }; + + gateclk: clock-gating-control@18220 { + compatible = "marvell,mv98dx3236-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; + }; + + cpuclk: clock-complex@18700 { + #clock-cells = <1>; + compatible = "marvell,mv98dx3236-cpu-clock"; + reg = <0x18700 0x24>, <0x1c054 0x10>; + clocks = <&coreclk 1>; + }; + + corediv-clock@18740 { + status = "disabled"; + }; + + cpu-config@21000 { + compatible = "marvell,armada-xp-cpu-config"; + reg = <0x21000 0x8>; + }; + + ethernet@70000 { + compatible = "marvell,armada-xp-neta"; + }; + + ethernet@74000 { + compatible = "marvell,armada-xp-neta"; + }; + + xor1: xor@f0800 { + compatible = "marvell,orion-xor"; + reg = <0xf0800 0x100 + 0xf0a00 0x100>; + clocks = <&gateclk 22>; + status = "okay"; + + xor10 { + interrupts = <51>; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = <52>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + nand_controller: nand@d0000 { + clocks = <&dfx_coredivclk 0>; + }; + + xor0: xor@f0900 { + compatible = "marvell,orion-xor"; + reg = <0xF0900 0x100 + 0xF0B00 0x100>; + clocks = <&gateclk 28>; + status = "okay"; + + xor00 { + interrupts = <94>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <95>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + }; + + dfx: dfx-server@ac000000 { + compatible = "marvell,dfx-server", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; + reg = ; + + thermal: thermal@f8078 { + compatible = "marvell,armada380-thermal"; + reg = <0xf8078 0x4>, <0xf8074 0x4>; + status = "okay"; + }; + + coreclk: mvebu-sar@f8204 { + compatible = "marvell,mv98dx3236-core-clock"; + reg = <0xf8204 0x4>; + #clock-cells = <1>; + }; + + dfx_coredivclk: corediv-clock@f8268 { + compatible = "marvell,mv98dx3236-corediv-clock"; + reg = <0xf8268 0xc>; + #clock-cells = <1>; + clocks = <&mainpll>; + clock-output-names = "nand"; + }; + }; + + switch: switch@a8000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>; + + pp0: packet-processor@0 { + compatible = "marvell,prestera-98dx3236", "marvell,prestera"; + reg = <0 0x4000000>; + interrupts = <33>, <34>, <35>; + dfx = <&dfx>; + }; + }; + }; + + clocks { + /* 25 MHz reference crystal */ + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + }; +}; + +&i2c0 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; +}; + +&i2c1 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11100 0x100>; +}; + +&mpic { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; +}; + +&rtc { + status = "disabled"; +}; + +&timer { + compatible = "marvell,armada-xp-timer"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; +}; + +&watchdog { + compatible = "marvell,armada-xp-wdt"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; +}; + +&cpurst { + reg = <0x20800 0x20>; +}; + +&usb0 { + clocks = <&gateclk 18>; +}; + +&usb1 { + clocks = <&gateclk 19>; +}; + +&pinctrl { + compatible = "marvell,98dx3236-pinctrl"; + + nand_pins: nand-pins { + marvell,pins = "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", + "mpp26", "mpp27", "mpp28", + "mpp29", "mpp30"; + marvell,function = "dev"; + }; + + nand_rb: nand-rb { + marvell,pins = "mpp19"; + marvell,function = "nand"; + }; + + spi0_pins: spi0-pins { + marvell,pins = "mpp0", "mpp1", + "mpp2", "mpp3"; + marvell,function = "spi0"; + }; +}; + +&spi0 { + compatible = "marvell,armada-xp-spi", "marvell,orion-spi"; + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; +}; + +&sdio { + status = "disabled"; +}; diff --git a/arch/arm/dts/armada-xp-98dx3336.dtsi b/arch/arm/dts/armada-xp-98dx3336.dtsi new file mode 100644 index 0000000000..1d9d8a8ea6 --- /dev/null +++ b/arch/arm/dts/armada-xp-98dx3336.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Marvell 98dx3336 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Contains definitions specific to the 98dx3236 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "Marvell 98DX3336 SoC"; + compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; + + cpus { + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + clock-latency = <1000000>; + }; + }; + + soc { + internal-regs { + resume@20980 { + compatible = "marvell,98dx3336-resume-ctrl"; + reg = <0x20980 0x10>; + }; + }; + }; +}; + +&pp0 { + compatible = "marvell,prestera-98dx3336", "marvell,prestera"; +}; diff --git a/arch/arm/dts/armada-xp-98dx4251.dtsi b/arch/arm/dts/armada-xp-98dx4251.dtsi new file mode 100644 index 0000000000..48ffdc72bf --- /dev/null +++ b/arch/arm/dts/armada-xp-98dx4251.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Marvell 98dx4521 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Contains definitions specific to the 98dx4521 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "Marvell 98DX4251 SoC"; + compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp"; + + cpus { + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + clock-latency = <1000000>; + }; + }; + + soc { + internal-regs { + resume@20980 { + compatible = "marvell,98dx3336-resume-ctrl"; + reg = <0x20980 0x10>; + }; + }; + }; +}; + +&sdio { + status = "okay"; +}; + +&pinctrl { + compatible = "marvell,98dx4251-pinctrl"; + + sdio_pins: sdio-pins { + marvell,pins = "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10"; + marvell,function = "sd0"; + }; +}; + +&pp0 { + compatible = "marvell,prestera-98dx4251", "marvell,prestera"; + interrupts = <33>, <34>, <35>, <36>; +}; diff --git a/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi b/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi new file mode 100644 index 0000000000..90cad85506 --- /dev/null +++ b/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +&uart0 { + u-boot,dm-pre-reloc; +}; + +&nand_controller { + compatible="marvell,mvebu-pxa3xx-nand"; + status = "okay"; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; + +&spi0 { + u-boot,dm-pre-reloc; + + spi-flash@0 { + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/dts/armada-xp-db-xc3-24g4xg.dts new file mode 100644 index 0000000000..d4b52881e6 --- /dev/null +++ b/arch/arm/dts/armada-xp-db-xc3-24g4xg.dts @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for DB-XC3-24G4XG board + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Based on armada-xp-db.dts + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3336.dtsi" +#include "armada-xp-db-xc3-24g4xg-u-boot.dtsi" + +/ { + model = "DB-XC3-24G4XG"; + compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + aliases { + spi0 = &spi0; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */ + }; +}; + +&L2 { + arm,parity-enable; + marvell,ecc-enable; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00ec0000>; + label = "unused"; + }; + + }; +}; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index bb4ca56a58..f5fd60d784 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -152,6 +152,10 @@ config TARGET_X530 bool "Support Allied Telesis x530" select 88F6820 +config TARGET_DB_XC3_24G4XG + bool "Support DB-XC3-24G4XG" + select 98DX3336 + endchoice config SYS_BOARD @@ -170,6 +174,7 @@ config SYS_BOARD default "theadorable" if TARGET_THEADORABLE default "a38x" if TARGET_CONTROLCENTERDC default "x530" if TARGET_X530 + default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG config SYS_CONFIG_NAME default "clearfog" if TARGET_CLEARFOG @@ -187,6 +192,7 @@ config SYS_CONFIG_NAME default "turris_mox" if TARGET_TURRIS_MOX default "controlcenterdc" if TARGET_CONTROLCENTERDC default "x530" if TARGET_X530 + default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG config SYS_VENDOR default "Marvell" if TARGET_DB_MV784MP_GP @@ -195,6 +201,8 @@ config SYS_VENDOR default "Marvell" if TARGET_DB_88F6820_GP default "Marvell" if TARGET_DB_88F6820_AMC default "Marvell" if TARGET_MVEBU_ARMADA_8K + default "Marvell" if TARGET_DB_XC3_24G4XG + default "Marvell" if TARGET_MVEBU_DB_88F7040 default "solidrun" if TARGET_CLEARFOG default "kobol" if TARGET_HELIOS4 default "Synology" if TARGET_DS414 diff --git a/board/Marvell/db-xc3-24g4xg/.gitignore b/board/Marvell/db-xc3-24g4xg/.gitignore new file mode 100644 index 0000000000..775b9346b8 --- /dev/null +++ b/board/Marvell/db-xc3-24g4xg/.gitignore @@ -0,0 +1 @@ +kwbimage.cfg diff --git a/board/Marvell/db-xc3-24g4xg/MAINTAINERS b/board/Marvell/db-xc3-24g4xg/MAINTAINERS new file mode 100644 index 0000000000..94d4a90178 --- /dev/null +++ b/board/Marvell/db-xc3-24g4xg/MAINTAINERS @@ -0,0 +1,7 @@ +DB-XC3-24G4XG BOARD +M: Chris Packham +S: Maintained +F: board/Marvell/db-xc3-24g4xg/ +F: include/configs/db-xc3-24g4xg.h +F: configs/db-xc3-24g4xg-amc_defconfig +F: arch/arm/dts/armada-xp-db-xc3-24g4xg.dts diff --git a/board/Marvell/db-xc3-24g4xg/Makefile b/board/Marvell/db-xc3-24g4xg/Makefile new file mode 100644 index 0000000000..4dd57902d4 --- /dev/null +++ b/board/Marvell/db-xc3-24g4xg/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2015 Stefan Roese + +obj-y := db-xc3-24g4xg.o +extra-y := kwbimage.cfg + +quiet_cmd_sed = SED $@ + cmd_sed = sed $(SEDFLAGS_$(@F)) $< >$(dir $<)$(@F) + +SEDFLAGS_kwbimage.cfg =-e "s|^BINARY.*|BINARY $(srctree)/$(@D)/binary.0 0000005b 00000068|" +$(src)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ + include/config/auto.conf + $(call if_changed,sed) diff --git a/board/Marvell/db-xc3-24g4xg/README b/board/Marvell/db-xc3-24g4xg/README new file mode 100644 index 0000000000..5e479b433e --- /dev/null +++ b/board/Marvell/db-xc3-24g4xg/README @@ -0,0 +1,4 @@ +To generate binary.0 from Marvell's bin_hdr.elf use the following command + + arm-softfloat-linux-gnueabi-objcopy -S -O binary bin_hdr.elf \ + board/Marvell/db-xc3-24g4xg/binary.0 diff --git a/board/Marvell/db-xc3-24g4xg/binary.0 b/board/Marvell/db-xc3-24g4xg/binary.0 new file mode 100644 index 0000000000..8dd687286a --- /dev/null +++ b/board/Marvell/db-xc3-24g4xg/binary.0 @@ -0,0 +1,11 @@ +-------- +WARNING: +-------- +This file should contain the bin_hdr generated by the original Marvell +U-Boot implementation. As this is currently not included in this +U-Boot version, we have added this placeholder, so that the U-Boot +image can be generated without errors. + +If you have a known to be working bin_hdr for your board, then you +just need to replace this text file here with the binary header +and recompile U-Boot. diff --git a/board/Marvell/db-xc3-24g4xg/db-xc3-24g4xg.c b/board/Marvell/db-xc3-24g4xg/db-xc3-24g4xg.c new file mode 100644 index 0000000000..cae428ffd0 --- /dev/null +++ b/board/Marvell/db-xc3-24g4xg/db-xc3-24g4xg.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015 Stefan Roese + */ + +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * These values and defines are taken from the Marvell U-Boot version + * "u-boot-2013.01-2016_T1.0.eng_drop_v6" + */ +#define DB_DX_AC3_GPP_OUT_ENA_LOW (~(BIT(0) | BIT(2) | BIT(3) | BIT(4) | BIT(6) | BIT(12) \ + | BIT(13) | BIT(16) | BIT(17) | BIT(20) | BIT(29) | BIT(30))) +#define DB_DX_AC3_GPP_OUT_ENA_MID (~(0)) +#define DB_DX_AC3_GPP_OUT_VAL_LOW (BIT(0) | BIT(2) | BIT(3) | BIT(4) | BIT(6) | BIT(12) \ + | BIT(13) | BIT(16) | BIT(17) | BIT(20) | BIT(29) | BIT(30)) +#define DB_DX_AC3_GPP_OUT_VAL_MID 0x0 +#define DB_DX_AC3_GPP_POL_LOW 0x0 +#define DB_DX_AC3_GPP_POL_MID 0x0 + +int board_early_init_f(void) +{ + /* Configure MPP */ + writel(0x00142222, MVEBU_MPP_BASE + 0x00); + writel(0x11122000, MVEBU_MPP_BASE + 0x04); + writel(0x44444004, MVEBU_MPP_BASE + 0x08); + writel(0x14444444, MVEBU_MPP_BASE + 0x0c); + writel(0x00000001, MVEBU_MPP_BASE + 0x10); + + /* Set GPP Out value */ + writel(DB_DX_AC3_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00); + writel(DB_DX_AC3_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00); + + /* Set GPP Polarity */ + writel(DB_DX_AC3_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c); + writel(DB_DX_AC3_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c); + + /* Set GPP Out Enable */ + writel(DB_DX_AC3_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04); + writel(DB_DX_AC3_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; + + return 0; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + puts("Board: " CONFIG_SYS_BOARD "\n"); + + return 0; +} +#endif diff --git a/board/Marvell/db-xc3-24g4xg/kwbimage.cfg.in b/board/Marvell/db-xc3-24g4xg/kwbimage.cfg.in new file mode 100644 index 0000000000..b8bb7a6eb7 --- /dev/null +++ b/board/Marvell/db-xc3-24g4xg/kwbimage.cfg.in @@ -0,0 +1,12 @@ +# +# Copyright (C) 2014 Stefan Roese +# + +# Armada XP uses version 1 image format +VERSION 1 + +# Boot Media configurations +BOOT_FROM spi + +# Binary Header (bin_hdr) with DDR3 training code +BINARY board/Marvell/db-xc3-24g4xg/binary.0 0000005b 00000068 diff --git a/configs/db-xc3-24g4xg_defconfig b/configs/db-xc3-24g4xg_defconfig new file mode 100644 index 0000000000..0285ccaa36 --- /dev/null +++ b/configs/db-xc3-24g4xg_defconfig @@ -0,0 +1,55 @@ +CONFIG_ARM=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_TEXT_BASE=0x00800000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_DB_XC3_24G4XG=y +CONFIG_BUILD_TARGET="u-boot.kwb" +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_UBI=y +CONFIG_DEFAULT_DEVICE_TREE="armada-xp-db-xc3-24g4xg" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SPL_OF_TRANSLATE=y +CONFIG_BLK=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MVTWSI=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_DEVICE=y +CONFIG_NAND=y +CONFIG_NAND_PXA3XX=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PCI=y +CONFIG_PCI_MVEBU=y +CONFIG_SYS_NS16550=y +CONFIG_KIRKWOOD_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y diff --git a/include/configs/db-xc3-24g4xg.h b/include/configs/db-xc3-24g4xg.h new file mode 100644 index 0000000000..0f75ad7185 --- /dev/null +++ b/include/configs/db-xc3-24g4xg.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2014 Stefan Roese + */ + +#ifndef _CONFIG_DB_XC3_24G4G_H +#define _CONFIG_DB_XC3_24G4G_H + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg +#define CONFIG_SYS_TCLK 200000000 /* 200MHz */ + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ + +/* NAND */ +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" +#undef CONFIG_SYS_MAXARGS +#define CONFIG_SYS_MAXARGS 96 + +#endif /* _CONFIG_DB_XC3_24G4G_H */