From: Lokesh Vutla Date: Thu, 3 Nov 2016 10:05:02 +0000 (+0530) Subject: ARM: k2g: Update PLL Multiplier and divider values X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4d0fec0e69189bd81c09909fc4eb742c63d5d7ee;p=u-boot.git ARM: k2g: Update PLL Multiplier and divider values Only a certain set of PLLM/D values are recommended to configure the DDR at the required speeds for a given clock input frequency. Updating these values as specified in Data Sheet[1] Table 5-18 [1] http://www.ti.com/lit/ds/symlink/66ak2g02.pdf Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini --- diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c index 8f16845d8e..40edbaa33f 100644 --- a/board/ti/ks2_evm/board_k2g.c +++ b/board/ti/ks2_evm/board_k2g.c @@ -66,7 +66,7 @@ static struct pll_init_data tetris_pll_config[NUM_SPDS] = { static struct pll_init_data uart_pll_config = {UART_PLL, 64, 1, 4}; static struct pll_init_data nss_pll_config = {NSS_PLL, 250, 3, 2}; -static struct pll_init_data ddr3_pll_config = {DDR3A_PLL, 250, 3, 10}; +static struct pll_init_data ddr3_pll_config = {DDR3A_PLL, 133, 1, 16}; struct pll_init_data *get_pll_init_data(int pll) {