From: Lokesh Vutla Date: Thu, 30 May 2013 02:54:33 +0000 (+0000) Subject: ARM: OMAP4+: pmic: Make generic bus init and write functions X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4ca94d81869f8c9ba3e72eac3a99d3eef29df991;p=u-boot.git ARM: OMAP4+: pmic: Make generic bus init and write functions Voltage scaling can be done in two ways: -> Using SR I2C -> Using GP I2C In order to support both, have a function pointer in pmic_data so that we can call as per our requirement. Signed-off-by: Lokesh Vutla --- diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 403b672f7e..6c8e0632c1 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -487,6 +487,7 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) u32 offset = volt_mv; int ret = 0; + pmic->pmic_bus_init(); /* See if we can first get the GPIO if needed */ if (pmic->gpio_en) ret = gpio_request(pmic->gpio, "PMIC_GPIO"); @@ -509,8 +510,7 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, offset_code); - if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR, - vcore_reg, offset_code)) + if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code)) printf("Scaling voltage failed for 0x%x\n", vcore_reg); if (pmic->gpio_en) @@ -525,8 +525,6 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) */ void scale_vcores(struct vcores_data const *vcores) { - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); - do_scale_vcore(vcores->core.addr, vcores->core.value, vcores->core.pmic); diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c index e6e5f7893c..a68f1d145d 100644 --- a/arch/arm/cpu/armv7/omap-common/vc.c +++ b/arch/arm/cpu/armv7/omap-common/vc.c @@ -17,6 +17,7 @@ #include #include #include +#include /* * Define Master code if there are multiple masters on the I2C_SR bus. @@ -57,7 +58,7 @@ * omap_vc_init() - Initialization for Voltage controller * @speed_khz: I2C buspeed in KHz */ -void omap_vc_init(u16 speed_khz) +static void omap_vc_init(u16 speed_khz) { u32 val; u32 sys_clk_khz, cycles_hi, cycles_low; @@ -137,3 +138,14 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data) /* All good.. */ return 0; } + +void sri2c_init(void) +{ + static int sri2c = 1; + + if (sri2c) { + omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + sri2c = 0; + } + return; +} diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 650319ad36..b97cad4364 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -219,6 +219,9 @@ struct pmic_data twl6030_4430es1 = { .step = 12660, /* 12.66 mV represented in uV */ /* The code starts at 1 not 0 */ .start_code = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, }; struct pmic_data twl6030 = { @@ -226,6 +229,9 @@ struct pmic_data twl6030 = { .step = 12660, /* 12.66 mV represented in uV */ /* The code starts at 1 not 0 */ .start_code = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, }; struct pmic_data tps62361 = { @@ -233,7 +239,10 @@ struct pmic_data tps62361 = { .step = 10000, /* 10 mV represented in uV */ .start_code = 0, .gpio = TPS62361_VSEL0_GPIO, - .gpio_en = 1 + .gpio_en = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, }; struct vcores_data omap4430_volts_es1 = { diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index d2f5900013..585e318671 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -289,6 +289,9 @@ struct pmic_data palmas = { * Offset code 0 switches OFF the SMPS */ .start_code = 6, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, }; struct vcores_data omap5430_volts = { diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index 0126a85bd3..15e368224f 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -57,7 +57,7 @@ u32 cortex_rev(void); void save_omap_boot_params(void); void init_omap_revision(void); void do_io_settings(void); -void omap_vc_init(u16 speed_khz); +void sri2c_init(void); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index fb35a82d4e..91eb36cf8b 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -61,7 +61,7 @@ u32 cortex_rev(void); void save_omap_boot_params(void); void init_omap_revision(void); void do_io_settings(void); -void omap_vc_init(u16 speed_khz); +void sri2c_init(void); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 712d78b0a6..b70575b1b5 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -501,6 +501,9 @@ struct pmic_data { u32 start_code; unsigned gpio; int gpio_en; + u32 i2c_slave_addr; + void (*pmic_bus_init)(void); + int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data); }; struct volts {