From: Zong Li Date: Wed, 30 Jun 2021 15:23:50 +0000 (+0800) Subject: board: sifive: support spl multi-dtb on unmatched board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4b4159d0f3;p=u-boot.git board: sifive: support spl multi-dtb on unmatched board There are two revisions of unmatched board with different DDR timing, we'd like to support multi-dtb mechanism in SPL, then it selects the right DTB at runtime according to PCB revision in I2C EEPROM. Signed-off-by: Zong Li Reviewed-by: Leo Yu-Chi Liang --- diff --git a/board/sifive/unmatched/spl.c b/board/sifive/unmatched/spl.c index 5e1333b09a..74134b03ee 100644 --- a/board/sifive/unmatched/spl.c +++ b/board/sifive/unmatched/spl.c @@ -10,11 +10,14 @@ #include #include #include +#include +#include #include #include #include #include #include +#include #define GEM_PHY_RESET SIFIVE_GENERIC_GPIO_NR(0, 12) @@ -26,6 +29,16 @@ int spl_board_init_f(void) { int ret; +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT) + int rescan; + + ret = fdtdec_resetup(&rescan); + if (!ret && rescan) { + dm_uninit(); + dm_init_and_scan(true); + } +#endif + ret = spl_soc_init(); if (ret) { debug("HiFive Unmatched FU740 SPL init failed: %d\n", ret); @@ -79,7 +92,18 @@ u32 spl_boot_device(void) #ifdef CONFIG_SPL_LOAD_FIT int board_fit_config_name_match(const char *name) { - /* boot using first FIT config */ - return 0; + /* + * Apply different DDR params on different board revision. + * Use PCB revision which is byte 0x7 in I2C platform EEPROM + * to distinguish that. + */ + if (get_pcb_revision_from_eeprom() == PCB_REVISION_REV3 && + !strcmp(name, "hifive-unmatched-a00")) + return 0; + else if (get_pcb_revision_from_eeprom() != PCB_REVISION_REV3 && + !strcmp(name, "hifive-unmatched-a00-rev1")) + return 0; + + return -1; } #endif diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig index 44edfd2974..3a45670280 100644 --- a/configs/sifive_unmatched_defconfig +++ b/configs/sifive_unmatched_defconfig @@ -41,3 +41,7 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PCI=y +CONFIG_SPL_MULTI_DTB_FIT=y +CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y +CONFIG_SPL_OF_LIST="hifive-unmatched-a00 hifive-unmatched-a00-rev1" +CONFIG_SPL_SYS_MALLOC_F_LEN=0x100000