From: Paul Burton Date: Thu, 29 Jan 2015 01:27:58 +0000 (+0000) Subject: MIPS: unify cache initialization code X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4a5d8898bca3e442b61e34b811aec8332752efd3;p=u-boot.git MIPS: unify cache initialization code The mips32 & mips64 cache initialization code differs only in that the mips32 code supports reading the cache size from coprocessor 0 registers at runtime. Move the more developed mips32 version to a common arch/mips/lib/cache_init.S & remove the now-redundant mips64 version in order to reduce duplication. The temporary registers used are shuffled slightly in order to work for both mips32 & mips64 builds. The RA register is defined differently to suit mips32 & mips64, but will be removed by a later commit in the series after further cleanup. Signed-off-by: Paul Burton Cc: Daniel Schwierzeck --- diff --git a/arch/mips/cpu/mips32/Makefile b/arch/mips/cpu/mips32/Makefile index fa82dd375f..19d316ab75 100644 --- a/arch/mips/cpu/mips32/Makefile +++ b/arch/mips/cpu/mips32/Makefile @@ -6,7 +6,6 @@ # extra-y = start.o -obj-y = cache.o -obj-y += cpu.o interrupts.o time.o +obj-y = cpu.o interrupts.o time.o obj-$(CONFIG_SOC_AU1X00) += au1x00/ diff --git a/arch/mips/cpu/mips64/Makefile b/arch/mips/cpu/mips64/Makefile index 899c319c9a..cb4db9c71b 100644 --- a/arch/mips/cpu/mips64/Makefile +++ b/arch/mips/cpu/mips64/Makefile @@ -6,4 +6,4 @@ # extra-y = start.o -obj-y = cpu.o interrupts.o time.o cache.o +obj-y = cpu.o interrupts.o time.o diff --git a/arch/mips/cpu/mips64/cache.S b/arch/mips/cpu/mips64/cache.S deleted file mode 100644 index 36d868818a..0000000000 --- a/arch/mips/cpu/mips64/cache.S +++ /dev/null @@ -1,213 +0,0 @@ -/* - * Cache-handling routined for MIPS CPUs - * - * Copyright (c) 2003 Wolfgang Denk - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include - -#define RA t9 - -/* - * 16kB is the maximum size of instruction and data caches on MIPS 4K, - * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience. - * - * Note that the above size is the maximum size of primary cache. U-Boot - * doesn't have L2 cache support for now. - */ -#define MIPS_MAX_CACHE_SIZE 0x10000 - -#define INDEX_BASE CKSEG0 - - .macro cache_op op addr - .set push - .set noreorder - .set mips3 - cache \op, 0(\addr) - .set pop - .endm - - .macro f_fill64 dst, offset, val - LONG_S \val, (\offset + 0 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 1 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 2 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 3 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 4 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 5 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 6 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 7 * LONGSIZE)(\dst) -#if LONGSIZE == 4 - LONG_S \val, (\offset + 8 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 9 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 10 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 11 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 12 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 13 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 14 * LONGSIZE)(\dst) - LONG_S \val, (\offset + 15 * LONGSIZE)(\dst) -#endif - .endm - -/* - * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz) - */ -LEAF(mips_init_icache) - blez a1, 9f - mtc0 zero, CP0_TAGLO - /* clear tag to invalidate */ - PTR_LI t0, INDEX_BASE - PTR_ADDU t1, t0, a1 -1: cache_op INDEX_STORE_TAG_I t0 - PTR_ADDU t0, a2 - bne t0, t1, 1b - /* fill once, so data field parity is correct */ - PTR_LI t0, INDEX_BASE -2: cache_op FILL t0 - PTR_ADDU t0, a2 - bne t0, t1, 2b - /* invalidate again - prudent but not strictly neccessary */ - PTR_LI t0, INDEX_BASE -1: cache_op INDEX_STORE_TAG_I t0 - PTR_ADDU t0, a2 - bne t0, t1, 1b -9: jr ra - END(mips_init_icache) - -/* - * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz) - */ -LEAF(mips_init_dcache) - blez a1, 9f - mtc0 zero, CP0_TAGLO - /* clear all tags */ - PTR_LI t0, INDEX_BASE - PTR_ADDU t1, t0, a1 -1: cache_op INDEX_STORE_TAG_D t0 - PTR_ADDU t0, a2 - bne t0, t1, 1b - /* load from each line (in cached space) */ - PTR_LI t0, INDEX_BASE -2: LONG_L zero, 0(t0) - PTR_ADDU t0, a2 - bne t0, t1, 2b - /* clear all tags */ - PTR_LI t0, INDEX_BASE -1: cache_op INDEX_STORE_TAG_D t0 - PTR_ADDU t0, a2 - bne t0, t1, 1b -9: jr ra - END(mips_init_dcache) - -/* - * mips_cache_reset - low level initialisation of the primary caches - * - * This routine initialises the primary caches to ensure that they have good - * parity. It must be called by the ROM before any cached locations are used - * to prevent the possibility of data with bad parity being written to memory. - * - * To initialise the instruction cache it is essential that a source of data - * with good parity is available. This routine will initialise an area of - * memory starting at location zero to be used as a source of parity. - * - * RETURNS: N/A - * - */ -NESTED(mips_cache_reset, 0, ra) - move RA, ra - li t2, CONFIG_SYS_ICACHE_SIZE - li t3, CONFIG_SYS_DCACHE_SIZE - li t8, CONFIG_SYS_CACHELINE_SIZE - - li v0, MIPS_MAX_CACHE_SIZE - - /* - * Now clear that much memory starting from zero. - */ - PTR_LI a0, CKSEG1 - PTR_ADDU a1, a0, v0 -2: PTR_ADDIU a0, 64 - f_fill64 a0, -64, zero - bne a0, a1, 2b - - /* - * The caches are probably in an indeterminate state, - * so we force good parity into them by doing an - * invalidate, load/fill, invalidate for each line. - */ - - /* - * Assume bottom of RAM will generate good parity for the cache. - */ - - /* - * Initialize the I-cache first, - */ - move a1, t2 - move a2, t8 - PTR_LA v1, mips_init_icache - jalr v1 - - /* - * then initialize D-cache. - */ - move a1, t3 - move a2, t8 - PTR_LA v1, mips_init_dcache - jalr v1 - - jr RA - END(mips_cache_reset) - -/* - * dcache_status - get cache status - * - * RETURNS: 0 - cache disabled; 1 - cache enabled - * - */ -LEAF(dcache_status) - mfc0 t0, CP0_CONFIG - li t1, CONF_CM_UNCACHED - andi t0, t0, CONF_CM_CMASK - move v0, zero - beq t0, t1, 2f - li v0, 1 -2: jr ra - END(dcache_status) - -/* - * dcache_disable - disable cache - * - * RETURNS: N/A - * - */ -LEAF(dcache_disable) - mfc0 t0, CP0_CONFIG - li t1, -8 - and t0, t0, t1 - ori t0, t0, CONF_CM_UNCACHED - mtc0 t0, CP0_CONFIG - jr ra - END(dcache_disable) - -/* - * dcache_enable - enable cache - * - * RETURNS: N/A - * - */ -LEAF(dcache_enable) - mfc0 t0, CP0_CONFIG - ori t0, CONF_CM_CMASK - xori t0, CONF_CM_CMASK - ori t0, CONF_CM_CACHABLE_NONCOHERENT - mtc0 t0, CP0_CONFIG - jr ra - END(dcache_enable) diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index d939ee6a32..ac536da674 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -6,6 +6,7 @@ # obj-y += cache.o +obj-y += cache_init.o obj-y += io.o obj-$(CONFIG_CMD_BOOTM) += bootm.o diff --git a/arch/mips/cpu/mips32/cache.S b/arch/mips/lib/cache_init.S similarity index 96% rename from arch/mips/cpu/mips32/cache.S rename to arch/mips/lib/cache_init.S index fb1d84b75a..6c02bf9b53 100644 --- a/arch/mips/cpu/mips32/cache.S +++ b/arch/mips/lib/cache_init.S @@ -18,7 +18,11 @@ #define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT #endif -#define RA t9 +#ifdef CONFIG_64BIT +# define RA ta3 +#else +# define RA t7 +#endif #define INDEX_BASE CKSEG0 @@ -117,7 +121,7 @@ NESTED(mips_cache_reset, 0, ra) #endif #ifdef CONFIG_SYS_CACHELINE_SIZE - li t7, CONFIG_SYS_CACHELINE_SIZE + li t9, CONFIG_SYS_CACHELINE_SIZE li t8, CONFIG_SYS_CACHELINE_SIZE #else /* Detect I-cache line size. */ @@ -128,11 +132,11 @@ NESTED(mips_cache_reset, 0, ra) sllv t8, t6, t8 1: /* Detect D-cache line size. */ - srl t7, t5, MIPS_CONF1_DL_SHIFT - andi t7, t7, (MIPS_CONF1_DL >> MIPS_CONF1_DL_SHIFT) - beqz t7, 1f + srl t9, t5, MIPS_CONF1_DL_SHIFT + andi t9, t9, (MIPS_CONF1_DL >> MIPS_CONF1_DL_SHIFT) + beqz t9, 1f li t6, 2 - sllv t7, t6, t7 + sllv t9, t6, t9 1: #endif @@ -168,7 +172,7 @@ NESTED(mips_cache_reset, 0, ra) addi t6, t6, 1 sllv t4, t4, t6 1: /* At this point t4 == I-cache sets. */ - mul t3, t4, t7 + mul t3, t4, t9 srl t6, t5, MIPS_CONF1_DA_SHIFT andi t6, t6, (MIPS_CONF1_DA >> MIPS_CONF1_DA_SHIFT) addi t6, t6, 1 @@ -219,7 +223,7 @@ NESTED(mips_cache_reset, 0, ra) * then initialize D-cache. */ move a1, t3 - move a2, t7 + move a2, t9 PTR_LA v1, mips_init_dcache jalr v1