From: Patrice Chotard Date: Tue, 12 Dec 2017 08:49:39 +0000 (+0100) Subject: board: stm32f429-disco: switch to DM STM32 clock driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4a56fd484a2e4a02ab372d299d0231002035f3ff;p=u-boot.git board: stm32f429-disco: switch to DM STM32 clock driver Use available DM clk_stm32f.c driver instead of dedicated mach-stm32/stm32f4/clock.c. Migrate periph_clock defines from stm32_periph.h directly in CLK driver. These periph_clock defines will be removed when STMMAC, TIMER2 and SYSCFG drivers will support DM CLK. Enable also CLK flag. Signed-off-by: Patrice Chotard --- diff --git a/arch/arm/include/asm/arch-stm32f4/stm32.h b/arch/arm/include/asm/arch-stm32f4/stm32.h index bd5c2ecdcb..889778cfd5 100644 --- a/arch/arm/include/asm/arch-stm32f4/stm32.h +++ b/arch/arm/include/asm/arch-stm32f4/stm32.h @@ -42,11 +42,6 @@ struct stm32_u_id_regs { u32 u_id_high; }; -struct stm32_pwr_regs { - u32 cr; - u32 csr; -}; - /* * Registers access macros */ @@ -56,9 +51,6 @@ struct stm32_pwr_regs { #define STM32_RCC_BASE (STM32_AHB1PERIPH_BASE + 0x3800) #define STM32_RCC ((struct stm32_rcc_regs *)STM32_RCC_BASE) -#define STM32_PWR_BASE (STM32_APB1PERIPH_BASE + 0x7000) -#define STM32_PWR ((struct stm32_pwr_regs *)STM32_PWR_BASE) - #define FLASH_CNTL_BASE (STM32_AHB1PERIPH_BASE + 0x3C00) static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = { @@ -67,15 +59,6 @@ static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = { [5 ... 11] = 128 * 1024 }; -enum clock { - CLOCK_CORE, - CLOCK_AHB, - CLOCK_APB1, - CLOCK_APB2 -}; - -int configure_clocks(void); -unsigned long clock_get(enum clock clck); void stm32_flash_latency_cfg(int latency); #endif /* _MACH_STM32_H_ */ diff --git a/arch/arm/mach-stm32/stm32f4/Makefile b/arch/arm/mach-stm32/stm32f4/Makefile index 63db820030..86c81bbe44 100644 --- a/arch/arm/mach-stm32/stm32f4/Makefile +++ b/arch/arm/mach-stm32/stm32f4/Makefile @@ -8,4 +8,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += clock.o timer.o +obj-y += timer.o diff --git a/arch/arm/mach-stm32/stm32f4/clock.c b/arch/arm/mach-stm32/stm32f4/clock.c deleted file mode 100644 index 774591d6a5..0000000000 --- a/arch/arm/mach-stm32/stm32f4/clock.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * (C) Copyright 2015 - * Kamil Lulko, - * - * (C) Copyright 2014 - * STMicroelectronics - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -#define RCC_CR_HSION (1 << 0) -#define RCC_CR_HSEON (1 << 16) -#define RCC_CR_HSERDY (1 << 17) -#define RCC_CR_HSEBYP (1 << 18) -#define RCC_CR_CSSON (1 << 19) -#define RCC_CR_PLLON (1 << 24) -#define RCC_CR_PLLRDY (1 << 25) - -#define RCC_PLLCFGR_PLLM_MASK 0x3F -#define RCC_PLLCFGR_PLLN_MASK 0x7FC0 -#define RCC_PLLCFGR_PLLP_MASK 0x30000 -#define RCC_PLLCFGR_PLLQ_MASK 0xF000000 -#define RCC_PLLCFGR_PLLSRC (1 << 22) -#define RCC_PLLCFGR_PLLN_SHIFT 6 -#define RCC_PLLCFGR_PLLP_SHIFT 16 -#define RCC_PLLCFGR_PLLQ_SHIFT 24 - -#define RCC_CFGR_AHB_PSC_MASK 0xF0 -#define RCC_CFGR_APB1_PSC_MASK 0x1C00 -#define RCC_CFGR_APB2_PSC_MASK 0xE000 -#define RCC_CFGR_SW0 (1 << 0) -#define RCC_CFGR_SW1 (1 << 1) -#define RCC_CFGR_SW_MASK 0x3 -#define RCC_CFGR_SW_HSI 0 -#define RCC_CFGR_SW_HSE RCC_CFGR_SW0 -#define RCC_CFGR_SW_PLL RCC_CFGR_SW1 -#define RCC_CFGR_SWS0 (1 << 2) -#define RCC_CFGR_SWS1 (1 << 3) -#define RCC_CFGR_SWS_MASK 0xC -#define RCC_CFGR_SWS_HSI 0 -#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0 -#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1 -#define RCC_CFGR_HPRE_SHIFT 4 -#define RCC_CFGR_PPRE1_SHIFT 10 -#define RCC_CFGR_PPRE2_SHIFT 13 - -#define RCC_APB1ENR_PWREN (1 << 28) - -/* - * RCC USART specific definitions - */ -#define RCC_ENR_USART1EN (1 << 4) -#define RCC_ENR_USART2EN (1 << 17) -#define RCC_ENR_USART3EN (1 << 18) -#define RCC_ENR_USART6EN (1 << 5) - -#define PWR_CR_VOS0 (1 << 14) -#define PWR_CR_VOS1 (1 << 15) -#define PWR_CR_VOS_MASK 0xC000 -#define PWR_CR_VOS_SCALE_MODE_1 (PWR_CR_VOS0 | PWR_CR_VOS1) -#define PWR_CR_VOS_SCALE_MODE_2 (PWR_CR_VOS1) -#define PWR_CR_VOS_SCALE_MODE_3 (PWR_CR_VOS0) - -/* - * RCC GPIO specific definitions - */ -#define RCC_ENR_GPIO_A_EN (1 << 0) -#define RCC_ENR_GPIO_B_EN (1 << 1) -#define RCC_ENR_GPIO_C_EN (1 << 2) -#define RCC_ENR_GPIO_D_EN (1 << 3) -#define RCC_ENR_GPIO_E_EN (1 << 4) -#define RCC_ENR_GPIO_F_EN (1 << 5) -#define RCC_ENR_GPIO_G_EN (1 << 6) -#define RCC_ENR_GPIO_H_EN (1 << 7) -#define RCC_ENR_GPIO_I_EN (1 << 8) -#define RCC_ENR_GPIO_J_EN (1 << 9) -#define RCC_ENR_GPIO_K_EN (1 << 10) - -#if !defined(CONFIG_STM32_HSE_HZ) -#error "CONFIG_STM32_HSE_HZ not defined!" -#else -#if (CONFIG_STM32_HSE_HZ == 8000000) -#if (CONFIG_SYS_CLK_FREQ == 180000000) -/* 180 MHz */ -struct pll_psc sys_pll_psc = { - .pll_m = 8, - .pll_n = 360, - .pll_p = 2, - .pll_q = 8, - .ahb_psc = AHB_PSC_1, - .apb1_psc = APB_PSC_4, - .apb2_psc = APB_PSC_2 -}; -#else -/* default 168 MHz */ -struct pll_psc sys_pll_psc = { - .pll_m = 8, - .pll_n = 336, - .pll_p = 2, - .pll_q = 7, - .ahb_psc = AHB_PSC_1, - .apb1_psc = APB_PSC_4, - .apb2_psc = APB_PSC_2 -}; -#endif -#else -#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists" -#endif -#endif - -int configure_clocks(void) -{ - /* Reset RCC configuration */ - setbits_le32(&STM32_RCC->cr, RCC_CR_HSION); - writel(0, &STM32_RCC->cfgr); /* Reset CFGR */ - clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON - | RCC_CR_PLLON)); - writel(0x24003010, &STM32_RCC->pllcfgr); /* Reset value from RM */ - clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP); - writel(0, &STM32_RCC->cir); /* Disable all interrupts */ - - /* Configure for HSE+PLL operation */ - setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON); - while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY)) - ; - - /* Enable high performance mode, System frequency up to 180 MHz */ - setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN); - writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr); - - setbits_le32(&STM32_RCC->cfgr, (( - sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT) - | (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT) - | (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT))); - - writel(sys_pll_psc.pll_m - | (sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT) - | (((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT) - | (sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT), - &STM32_RCC->pllcfgr); - setbits_le32(&STM32_RCC->pllcfgr, RCC_PLLCFGR_PLLSRC); - - setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON); - - while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY)) - ; - - stm32_flash_latency_cfg(5); - clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1)); - setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL); - - while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) != - RCC_CFGR_SWS_PLL) - ; - - return 0; -} - -unsigned long clock_get(enum clock clck) -{ - u32 sysclk = 0; - u32 shift = 0; - /* Prescaler table lookups for clock computation */ - u8 ahb_psc_table[16] = { - 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9 - }; - u8 apb_psc_table[8] = { - 0, 0, 0, 0, 1, 2, 3, 4 - }; - - if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) == - RCC_CFGR_SWS_PLL) { - u16 pllm, plln, pllp; - pllm = (readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLM_MASK); - plln = ((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLN_MASK) - >> RCC_PLLCFGR_PLLN_SHIFT); - pllp = ((((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLP_MASK) - >> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1); - sysclk = ((CONFIG_STM32_HSE_HZ / pllm) * plln) / pllp; - } - - switch (clck) { - case CLOCK_CORE: - return sysclk; - break; - case CLOCK_AHB: - shift = ahb_psc_table[( - (readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK) - >> RCC_CFGR_HPRE_SHIFT)]; - return sysclk >>= shift; - break; - case CLOCK_APB1: - shift = apb_psc_table[( - (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK) - >> RCC_CFGR_PPRE1_SHIFT)]; - return sysclk >>= shift; - break; - case CLOCK_APB2: - shift = apb_psc_table[( - (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK) - >> RCC_CFGR_PPRE2_SHIFT)]; - return sysclk >>= shift; - break; - default: - return 0; - break; - } -} - -void clock_setup(int peripheral) -{ - switch (peripheral) { - case USART1_CLOCK_CFG: - setbits_le32(&STM32_RCC->apb2enr, RCC_ENR_USART1EN); - break; - case GPIO_A_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_A_EN); - break; - case GPIO_B_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_B_EN); - break; - case GPIO_C_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_C_EN); - break; - case GPIO_D_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_D_EN); - break; - case GPIO_E_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_E_EN); - break; - case GPIO_F_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_F_EN); - break; - case GPIO_G_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_G_EN); - break; - case GPIO_H_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_H_EN); - break; - case GPIO_I_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_I_EN); - break; - case GPIO_J_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_J_EN); - break; - case GPIO_K_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_K_EN); - break; - default: - break; - } -} diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c index 7e62bd2aa2..c5f457324a 100644 --- a/board/st/stm32f429-discovery/stm32f429-discovery.c +++ b/board/st/stm32f429-discovery/stm32f429-discovery.c @@ -13,12 +13,10 @@ #include #include -#include + #include #include #include -#include -#include DECLARE_GLOBAL_DATA_PTR; @@ -48,7 +46,6 @@ int uart_setup_gpio(void) int i; int rv = 0; - clock_setup(GPIO_A_CLOCK_CFG); for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) { rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart); if (rv) @@ -114,13 +111,6 @@ static int fmc_setup_gpio(void) int rv = 0; int i; - clock_setup(GPIO_B_CLOCK_CFG); - clock_setup(GPIO_C_CLOCK_CFG); - clock_setup(GPIO_D_CLOCK_CFG); - clock_setup(GPIO_E_CLOCK_CFG); - clock_setup(GPIO_F_CLOCK_CFG); - clock_setup(GPIO_G_CLOCK_CFG); - for (i = 0; i < ARRAY_SIZE(ext_ram_fmc_gpio); i++) { rv = stm32_gpio_config(&ext_ram_fmc_gpio[i], &gpio_ctl_fmc); @@ -132,11 +122,6 @@ out: return rv; } -/* - * STM32 RCC FMC specific definitions - */ -#define STM32_RCC_ENR_FMC (1 << 0) /* FMC module clock */ - int dram_init(void) { int rv; @@ -145,9 +130,6 @@ int dram_init(void) rv = fmc_setup_gpio(); if (rv) return rv; - - setbits_le32(&STM32_RCC->ahb3enr, STM32_RCC_ENR_FMC); - rv = uclass_get_device(UCLASS_RAM, 0, &dev); if (rv) { debug("DRAM init failed: %d\n", rv); @@ -176,13 +158,9 @@ int board_early_init_f(void) { int res; - configure_clocks(); - res = uart_setup_gpio(); if (res) return res; - clock_setup(USART1_CLOCK_CFG); - return 0; } diff --git a/configs/stm32f429-discovery_defconfig b/configs/stm32f429-discovery_defconfig index ae106ff818..ee50b35cc8 100644 --- a/configs/stm32f429-discovery_defconfig +++ b/configs/stm32f429-discovery_defconfig @@ -19,6 +19,7 @@ CONFIG_CMD_TIMER=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_ENV_IS_IN_FLASH=y +CONFIG_CLK=y CONFIG_MISC=y CONFIG_STM32_RCC=y # CONFIG_MMC is not set diff --git a/drivers/clk/clk_stm32f.c b/drivers/clk/clk_stm32f.c index 634f0717c6..63116e0bac 100644 --- a/drivers/clk/clk_stm32f.c +++ b/drivers/clk/clk_stm32f.c @@ -12,7 +12,6 @@ #include #include -#include #include #include @@ -88,6 +87,12 @@ */ #define RCC_APB2ENR_SYSCFGEN BIT(14) +enum periph_clock { + SYSCFG_CLOCK_CFG, + TIMER2_CLOCK_CFG, + STMMAC_CLOCK_CFG, +}; + struct stm32_clk_info stm32f4_clk_info = { /* 180 MHz */ .sys_pll_psc = {