From: Antoine Mazeas Date: Fri, 19 Aug 2022 08:56:46 +0000 (+0200) Subject: rpi: Copy eth PHY address from fw DT to loaded DT X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4a45086c0ca874858d4064ee26d45199bcab494d;p=u-boot.git rpi: Copy eth PHY address from fw DT to loaded DT Some Raspberry Pi 400 boards, specifically rev 1.1, have a different address for the ethernet PHY device than what is provided by the kernel DTB. The correct address is provided by the firmware, so we should carry it over into the loaded device tree so that ethernet works on such boards. Signed-off-by: Antoine Mazeas Signed-off-by: Peter Robinson --- diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index d4b059c620..fc1fffedfb 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -547,6 +547,9 @@ void update_fdt_from_fw(void *fdt, void *fw_fdt) /* kernel address randomisation seed as provided by the firmware */ copy_property(fdt, fw_fdt, "/chosen", "kaslr-seed"); + + /* address of the PHY device as provided by the firmware */ + copy_property(fdt, fw_fdt, "ethernet0/mdio@e14/ethernet-phy@1", "reg"); } int ft_board_setup(void *blob, struct bd_info *bd)