From: Neil Armstrong Date: Tue, 26 Mar 2019 10:20:35 +0000 (+0100) Subject: boards: Amlogic: Add support for Libretech-AC X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4a327e832917c1c27ed2b7fda0d24d34b137ff60;p=u-boot.git boards: Amlogic: Add support for Libretech-AC LibreTech AC is a single board computer manufactured by Libre Technology with the following specifications: - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz - ARM Mali 450 GPU - 512MiB DDR4 SDRAM - 10/100 Ethernet - HDMI 2.0 4K/60Hz display - 40-pin GPIO header - 4 x USB 2.0 Host - eMMC, SPI NOR Flash - Infrared receiver The u-boot specific code is the same as the P212 support, so use the P212 board support code with a distinct defconfig and config include files. Signed-off-by: Neil Armstrong --- diff --git a/board/amlogic/p212/MAINTAINERS b/board/amlogic/p212/MAINTAINERS index 07ca6f204d..74ad3716ec 100644 --- a/board/amlogic/p212/MAINTAINERS +++ b/board/amlogic/p212/MAINTAINERS @@ -4,5 +4,6 @@ S: Maintained F: board/amlogic/p212/ F: include/configs/p212.h F: configs/khadas-vim_defconfig +F: configs/libretech-ac_defconfig F: configs/libretech-cc_defconfig F: configs/p212_defconfig diff --git a/board/amlogic/p212/README.libretech-ac b/board/amlogic/p212/README.libretech-ac new file mode 100644 index 0000000000..538604261b --- /dev/null +++ b/board/amlogic/p212/README.libretech-ac @@ -0,0 +1,103 @@ +U-Boot for LibreTech AC +======================= + +LibreTech AC is a single board computer manufactured by Libre Technology +with the following specifications: + + - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz + - ARM Mali 450 GPU + - 512MiB DDR4 SDRAM + - 10/100 Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 4 x USB 2.0 Host + - eMMC, SPI NOR Flash + - Infrared receiver + +Schematics are available on the manufacturer website. + +Currently the U-Boot port supports the following devices: + - serial + - eMMC + - Ethernet + - USB + +U-Boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make libretech-ac_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + > git clone https://github.com/BayLibre/u-boot.git -b libretech-ac amlogic-u-boot + > cd amlogic-u-boot + > wget https://raw.githubusercontent.com/BayLibre/u-boot/libretech-cc/fip/blx_fix.sh + > make libretech_ac_defconfig + > make + > export UBOOTDIR=$PWD + +Download the latest Amlogic Buildroot package, and extract it : + > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz + > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader + > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418 + +Go back to mainline U-Boot source tree then : + > mkdir fip + + > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/bl21.bin fip/ + > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/acs.bin fip/ + > cp $BRDIR/bootloader/uboot-repo/bl2/bin/gxl/bl2.bin fip/ + > cp $BRDIR/bootloader/uboot-repo/bl30/bin/gxl/bl30.bin fip/ + > cp $BRDIR/bootloader/uboot-repo/bl31/bin/gxl/bl31.img fip/ + > cp u-boot.bin fip/bl33.bin + + > sh $UBOOTDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + > $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + > sh $UBOOTDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/configs/libretech-ac_defconfig b/configs/libretech-ac_defconfig new file mode 100644 index 0000000000..2cdfcf42f5 --- /dev/null +++ b/configs/libretech-ac_defconfig @@ -0,0 +1,74 @@ +CONFIG_ARM=y +CONFIG_SYS_CONFIG_NAME="libretech-ac" +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_MESON_GXL=y +CONFIG_DEBUG_UART_BASE=0xc81004c0 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" libretech-ac" +CONFIG_DEBUG_UART=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_OF_BOARD_SETUP=y +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_ADC=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s805x-libretech-ac" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SARADC_MESON=y +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_PHY_ADDR_ENABLE=y +CONFIG_PHY_ADDR=8 +CONFIG_PHY_MESON_GXL=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_PHY=y +CONFIG_MESON_GXL_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_GXL=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_GX_VPU_POWER_DOMAIN=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_MESON=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_MESON_SPIFC=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y +CONFIG_USB_DWC3=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_STORAGE=y +CONFIG_CONSOLE_MUX=y +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_DM_VIDEO=y +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/include/configs/libretech-ac.h b/include/configs/libretech-ac.h new file mode 100644 index 0000000000..419dc61587 --- /dev/null +++ b/include/configs/libretech-ac.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration for LibreTech AC + * + * Copyright (C) 2017 Baylibre, SAS + * Author: Neil Armstrong + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_OFFSET (-0x10000) + +#define BOOT_TARGET_DEVICES(func) \ + func(ROMUSB, romusb, na) \ + func(MMC, mmc, 0) \ + BOOT_TARGET_DEVICES_USB(func) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#include + +#endif /* __CONFIG_H */