From: Michal Simek <michal.simek@amd.com>
Date: Thu, 21 Jul 2022 14:19:18 +0000 (+0200)
Subject: xilinx: common: Use strlcpy instead of strncpy
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4a1bfcd7aa6f2138a8431a916d4202a66ab65a6c;p=u-boot.git

xilinx: common: Use strlcpy instead of strncpy

It is recommendation done by checkpatch to all the time have \0 terminated
strings.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c7bfab50c40f6213f1b347b5e4674e382e83cb94.1658413156.git.michal.simek@amd.com
---

diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
index b0c11aaa42..9b4aded466 100644
--- a/board/xilinx/common/board.c
+++ b/board/xilinx/common/board.c
@@ -238,23 +238,23 @@ static int xilinx_read_eeprom_fru(struct udevice *dev, char *name,
 	}
 
 	/* It is clear that FRU was captured and structures were filled */
-	strncpy(desc->manufacturer, (char *)fru_data.brd.manufacturer_name,
+	strlcpy(desc->manufacturer, (char *)fru_data.brd.manufacturer_name,
 		sizeof(desc->manufacturer));
-	strncpy(desc->uuid, (char *)fru_data.brd.uuid,
+	strlcpy(desc->uuid, (char *)fru_data.brd.uuid,
 		sizeof(desc->uuid));
-	strncpy(desc->name, (char *)fru_data.brd.product_name,
+	strlcpy(desc->name, (char *)fru_data.brd.product_name,
 		sizeof(desc->name));
 	for (i = 0; i < sizeof(desc->name); i++) {
 		if (desc->name[i] == ' ')
 			desc->name[i] = '\0';
 	}
-	strncpy(desc->revision, (char *)fru_data.brd.rev,
+	strlcpy(desc->revision, (char *)fru_data.brd.rev,
 		sizeof(desc->revision));
 	for (i = 0; i < sizeof(desc->revision); i++) {
 		if (desc->revision[i] == ' ')
 			desc->revision[i] = '\0';
 	}
-	strncpy(desc->serial, (char *)fru_data.brd.serial_number,
+	strlcpy(desc->serial, (char *)fru_data.brd.serial_number,
 		sizeof(desc->serial));
 
 	while (id < EEPROM_HDR_NO_OF_MAC_ADDR) {