From: Bob Liu Date: Tue, 27 Dec 2011 07:05:53 +0000 (+0800) Subject: blackfin: bf60x: add hw watchdog support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=49c2da53b7aa63f68118fa9ffa5c5e546440ebb2;p=u-boot.git blackfin: bf60x: add hw watchdog support Signed-off-by: Bob Liu Signed-off-by: Sonic Zhang Signed-off-by: Sonic Zhang --- diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index a717148651..ce9a43598c 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -461,8 +461,21 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) */ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) { serial_putc('e'); +#ifdef __ADSPBF60x__ + bfin_write_SEC_GCTL(0x2); + SSYNC(); + bfin_write_SEC_FCTL(0xc1); + bfin_write_SEC_SCTL(2, bfin_read_SEC_SCTL(2) | 0x6); + + bfin_write_SEC_CCTL(0x2); + SSYNC(); + bfin_write_SEC_GCTL(0x1); + bfin_write_SEC_CCTL(0x1); +#endif bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE)); +#if CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART bfin_write_WDOG_CTL(0); +#endif serial_putc('f'); } #endif diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S index 90b4d1ae94..7155fc858b 100644 --- a/arch/blackfin/cpu/start.S +++ b/arch/blackfin/cpu/start.S @@ -65,6 +65,7 @@ ENTRY(_start) p5.h = HI(COREMMR_BASE); #ifdef CONFIG_HW_WATCHDOG +#ifndef __ADSPBF60x__ # ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START # define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000 # endif @@ -77,6 +78,7 @@ ENTRY(_start) [p4 + (WDOG_CNT - SYSMMR_BASE)] = r0; /* fire up the watchdog - R0.L above needs to be 0x0000 */ W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r0; +#endif #endif /* Turn on the serial for debugging the init process */ diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 6dffab86dc..02149fa94d 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -63,6 +63,7 @@ #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (512 * 1024) +#define CONFIG_HW_WATCHDOG /* * Network Settings */