From: Nishanth Menon Date: Tue, 22 Aug 2023 16:41:00 +0000 (-0500) Subject: doc: board: ti: j7200: provide image alt text X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=49509dfec83d24a45af11a5e451fd2cbb03659ad;p=u-boot.git doc: board: ti: j7200: provide image alt text Provide alternative text for image. Fixes: f4ade09a1e76 ("doc: board: ti: j7200: Convert the image format to svg") Reported-by: Heinrich Schuchardt Signed-off-by: Nishanth Menon --- diff --git a/doc/board/ti/j7200_evm.rst b/doc/board/ti/j7200_evm.rst index 2e60e22ba1..2bf680cda2 100644 --- a/doc/board/ti/j7200_evm.rst +++ b/doc/board/ti/j7200_evm.rst @@ -35,6 +35,7 @@ Boot Flow: Below is the pictorial representation of boot flow: .. image:: img/boot_diagram_k3_current.svg + :alt: Boot flow diagram - Here DMSC acts as master and provides all the critical services. R5/A72 requests DMSC to get these services done as shown in the above diagram. @@ -130,12 +131,12 @@ Image formats: - tiboot3.bin .. image:: img/j7200_tiboot3.bin.svg + :alt: tiboot3.bin image format - tispl.bin .. image:: img/dm_tispl.bin.svg - - + :alt: tispl.bin image format Switch Setting for Boot Mode ---------------------------- @@ -191,6 +192,7 @@ Size of u-boot.img is taken 4MB for refernece, But this is subject to change depending upon atf, optee size .. image:: img/emmc_j7200_evm_boot01.svg + :alt: Traditional eMMC boot partition layout In case of UDA FS mode booting, following is layout. @@ -198,6 +200,7 @@ All boot images tiboot3.bin, tispl and u-boot should be written to fat formatted UDA FS as file. .. image:: img/emmc_j7200_evm_udafs.svg + :alt: eMMC UDA boot partition layout In case of booting from eMMC, write above images into raw or UDA FS. and set mmc partconf accordingly.