From: Johann Neuhauser Date: Thu, 30 Jun 2022 14:19:48 +0000 (+0200) Subject: arm: dts: stm32mp1: Drop fastboot and stm32prog trigger gpios on DHCOM X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=48d9eaf6826a1816c5f9839a564ea6338da609a7;p=u-boot.git arm: dts: stm32mp1: Drop fastboot and stm32prog trigger gpios on DHCOM PA13 and PA14 are used for USB power control and can't be used to enforce fastboot or stm32prog mode by pressing a button. Defining CONFIG_FASTBOOT/CONFIG_CMD_STM32PROG without this patch applied results in fastboot/stm32prog always starting, because PA13/PA14 are always low during boot. So drop the wrong trigger gpios definitions. Signed-off-by: Johann Neuhauser Reviewed-by: Marek Vasut Reviewed-by: Patrick Delaunay --- diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index d73967ac1b..ee747a52bb 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -27,8 +27,6 @@ config { u-boot,boot-led = "heartbeat"; u-boot,error-led = "error"; - st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; - st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>; dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>; };