From: Tom Rini <trini@konsulko.com>
Date: Wed, 1 Sep 2021 11:52:08 +0000 (-0400)
Subject: Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=48cf96fbdf9cf70c4f249c0207ce57c7dff4dd55;p=u-boot.git

Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell

- mvebu: a38x: Define supported UART baudrates (Pali)
- kwbimage: Misc improvements (Pali)
- espressobin/turris_mox/turris_omnia: Enable some more devices
  like SATA via PCIe, SATA & NVMe (Pali)
- a37xx: Remove unused CONFIG_DEBUG_UART_SHIFT options (Pali)
- turris_omnia: Disable MCU watchdog in SPL when booting over
  UART (Marek)
- kwbimage: Fix some Coverity issue (Heinrich)
---

48cf96fbdf9cf70c4f249c0207ce57c7dff4dd55
diff --cc arch/arm/mach-mvebu/cpu.c
index 0b935c46fb,daf8bd66a0..0272dd7352
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@@ -80,6 -81,65 +81,65 @@@ int mvebu_soc_family(void
  	return MVEBU_SOC_UNKNOWN;
  }
  
+ u32 get_boot_device(void)
+ {
+ 	u32 val;
+ 	u32 boot_device;
+ 
+ 	/*
 -	  * First check, if UART boot-mode is active. This can only
 -	  * be done, via the bootrom error register. Here the
 -	  * MSB marks if the UART mode is active.
 -	  */
++	 * First check, if UART boot-mode is active. This can only
++	 * be done, via the bootrom error register. Here the
++	 * MSB marks if the UART mode is active.
++	 */
+ 	val = readl(CONFIG_BOOTROM_ERR_REG);
+ 	boot_device = (val & BOOTROM_ERR_MODE_MASK) >> BOOTROM_ERR_MODE_OFFS;
+ 	debug("BOOTROM_REG=0x%08x boot_device=0x%x\n", val, boot_device);
+ 	if (boot_device == BOOTROM_ERR_MODE_UART)
+ 		return BOOT_DEVICE_UART;
+ 
+ #ifdef CONFIG_ARMADA_38X
+ 	/*
 -	  * If the bootrom error code contains any other than zeros it's an
 -	  * error condition and the bootROM has fallen back to UART boot
 -	  */
++	 * If the bootrom error code contains any other than zeros it's an
++	 * error condition and the bootROM has fallen back to UART boot
++	 */
+ 	boot_device = (val & BOOTROM_ERR_CODE_MASK) >> BOOTROM_ERR_CODE_OFFS;
+ 	if (boot_device)
+ 		return BOOT_DEVICE_UART;
+ #endif
+ 
+ 	/*
 -	  * Now check the SAR register for the strapped boot-device
 -	  */
++	 * Now check the SAR register for the strapped boot-device
++	 */
+ 	val = readl(CONFIG_SAR_REG);	/* SAR - Sample At Reset */
+ 	boot_device = (val & BOOT_DEV_SEL_MASK) >> BOOT_DEV_SEL_OFFS;
+ 	debug("SAR_REG=0x%08x boot_device=0x%x\n", val, boot_device);
+ 	switch (boot_device) {
+ #ifdef BOOT_FROM_NAND
+ 	case BOOT_FROM_NAND:
+ 		return BOOT_DEVICE_NAND;
+ #endif
+ #ifdef BOOT_FROM_MMC
+ 	case BOOT_FROM_MMC:
+ 	case BOOT_FROM_MMC_ALT:
+ 		return BOOT_DEVICE_MMC1;
+ #endif
+ 	case BOOT_FROM_UART:
+ #ifdef BOOT_FROM_UART_ALT
+ 	case BOOT_FROM_UART_ALT:
+ #endif
+ 		return BOOT_DEVICE_UART;
+ #ifdef BOOT_FROM_SATA
+ 	case BOOT_FROM_SATA:
+ 	case BOOT_FROM_SATA_ALT:
+ 		return BOOT_DEVICE_SATA;
+ #endif
+ 	case BOOT_FROM_SPI:
+ 		return BOOT_DEVICE_SPI;
+ 	default:
+ 		return BOOT_DEVICE_BOOTROM;
+ 	};
+ }
+ 
  #if defined(CONFIG_DISPLAY_CPUINFO)
  
  #if defined(CONFIG_ARMADA_375)