From: Svyatoslav Ryhel Date: Tue, 25 Apr 2023 07:57:22 +0000 (+0300) Subject: extcon: add MAX14526 MUIC support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=488d3dae24c4e27bc0f500dbe76ea767794a59ac;p=u-boot.git extcon: add MAX14526 MUIC support MAX14526 is a powerful extcon chip which allows detection of various plugs like usb, mhl, uart, headset etc. This version of driver implements support of AP-usb and CP-usb/uart paths. Tested-by: Andreas Westman Dorcsak # LG P880 T30 Tested-by: Svyatoslav Ryhel # LG P895 T30 Signed-off-by: Svyatoslav Ryhel Reviewed-by: Simon Glass --- diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 6fd3d2b97b..fbb73354aa 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -19,4 +19,13 @@ config EXTCON_SANDBOX Enable extcon support for sandbox. This is an emulation of a real extcon. Currectly all configuration is done in the probe. +config EXTCON_MAX14526 + bool "Maxim MAX14526 EXTCON Support" + depends on DM_I2C + depends on EXTCON + help + If you say yes here you get support for the MUIC device of + Maxim MAX14526. The MAX14526 MUIC is a USB port accessory + detector and switch. + endmenu diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index c4223d97d1..3309f2aac2 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_EXTCON) += extcon-uclass.o obj-$(CONFIG_EXTCON_SANDBOX) += extcon-sandbox.o +obj-$(CONFIG_EXTCON_MAX14526) += extcon-max14526.o diff --git a/drivers/extcon/extcon-max14526.c b/drivers/extcon/extcon-max14526.c new file mode 100644 index 0000000000..a33b5ef919 --- /dev/null +++ b/drivers/extcon/extcon-max14526.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2022 Svyatoslav Ryhel + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define CONTROL_1 0x01 +#define SW_CONTROL 0x03 + +#define ID_200 0x10 +#define ADC_EN 0x02 +#define CP_EN 0x01 + +#define DP_USB 0x00 +#define DP_UART 0x08 +#define DP_AUDIO 0x10 +#define DP_OPEN 0x38 + +#define DM_USB 0x00 +#define DM_UART 0x01 +#define DM_AUDIO 0x02 +#define DM_OPEN 0x07 + +#define AP_USB BIT(0) +#define CP_USB BIT(1) +#define CP_UART BIT(2) + +struct max14526_priv { + struct gpio_desc usif_gpio; + struct gpio_desc dp2t_gpio; + struct gpio_desc ifx_usb_vbus_gpio; +}; + +static void max14526_set_mode(struct udevice *dev, int mode) +{ + struct max14526_priv *priv = dev_get_priv(dev); + int ret; + + if ((mode & AP_USB) || (mode & CP_USB)) { + /* Connect CP UART signals to AP */ + ret = dm_gpio_set_value(&priv->usif_gpio, 0); + if (ret) + log_debug("cp-uart > ap failed (%d)\n", ret); + } + + if (mode & CP_UART) { + /* Connect CP UART signals to DP2T */ + ret = dm_gpio_set_value(&priv->usif_gpio, 1); + if (ret) + log_debug("cp-uart > dp2t failed (%d)\n", ret); + } + + if (mode & CP_USB) { + /* Connect CP USB to MUIC UART */ + ret = dm_gpio_set_value(&priv->ifx_usb_vbus_gpio, 1); + if (ret) + log_debug("usb-vbus-gpio enable failed (%d)\n", ret); + + ret = dm_gpio_set_value(&priv->dp2t_gpio, 1); + if (ret) + log_debug("cp-usb > muic-uart failed (%d)\n", ret); + } + + if ((mode & AP_USB) || (mode & CP_UART)) { + /* Connect CP UART to MUIC UART */ + ret = dm_gpio_set_value(&priv->dp2t_gpio, 0); + if (ret) + log_debug("cp-uart > muic-uart failed (%d)\n", ret); + } + + if (mode & AP_USB) { + /* Enables USB Path */ + ret = dm_i2c_reg_write(dev, SW_CONTROL, DP_USB | DM_USB); + if (ret) + log_debug("USB path set failed: %d\n", ret); + } + + if ((mode & CP_USB) || (mode & CP_UART)) { + /* Enables UART Path */ + ret = dm_i2c_reg_write(dev, SW_CONTROL, DP_UART | DM_UART); + if (ret) + log_debug("UART path set failed: %d\n", ret); + } + + /* Enables 200K, Charger Pump, and ADC */ + ret = dm_i2c_reg_write(dev, CONTROL_1, ID_200 | ADC_EN | CP_EN); + if (ret) + log_debug("200K, Charger Pump, and ADC set failed: %d\n", ret); +} + +static int max14526_probe(struct udevice *dev) +{ + struct max14526_priv *priv = dev_get_priv(dev); + int ret, mode = 0; + + ret = gpio_request_by_name(dev, "usif-gpios", 0, + &priv->usif_gpio, GPIOD_IS_OUT); + if (ret) { + log_err("could not decode usif-gpios (%d)\n", ret); + return ret; + } + + ret = gpio_request_by_name(dev, "dp2t-gpios", 0, + &priv->dp2t_gpio, GPIOD_IS_OUT); + if (ret) { + log_err("could not decode dp2t-gpios (%d)\n", ret); + return ret; + } + + if (dev_read_bool(dev, "maxim,ap-usb")) + mode |= AP_USB; + + if (dev_read_bool(dev, "maxim,cp-usb")) { + mode |= CP_USB; + + ret = gpio_request_by_name(dev, "usb-vbus-gpios", 0, + &priv->ifx_usb_vbus_gpio, GPIOD_IS_OUT); + if (ret) { + log_err("could not decode usb-vbus-gpios (%d)\n", ret); + return ret; + } + } + + if (dev_read_bool(dev, "maxim,cp-uart")) + mode |= CP_UART; + + max14526_set_mode(dev, mode); + + return 0; +} + +static const struct udevice_id max14526_ids[] = { + { .compatible = "maxim,max14526-muic" }, + { } +}; + +U_BOOT_DRIVER(extcon_max14526) = { + .name = "extcon_max14526", + .id = UCLASS_EXTCON, + .of_match = max14526_ids, + .probe = max14526_probe, + .priv_auto = sizeof(struct max14526_priv), +};