From: Tom Rini Date: Wed, 22 Sep 2021 18:50:33 +0000 (-0400) Subject: Convert CONFIG_SYS_NAND_5_ADDR_CYCLE to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4884d829d72e58d3448df46325699cdc2151686e;p=u-boot.git Convert CONFIG_SYS_NAND_5_ADDR_CYCLE to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_5_ADDR_CYCLE Signed-off-by: Tom Rini --- diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 4e90af6fda..dc85a84198 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -57,6 +57,7 @@ CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 +# CONFIG_SYS_NAND_5_ADDR_CYCLE is not set CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_ADDR=31 diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index dab392e983..0c536c9339 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -425,6 +425,15 @@ config SYS_NAND_MAX_CHIPS if SPL +config SYS_NAND_5_ADDR_CYCLE + bool "Wait 5 address cycles during NAND commands" + depends on SPL_NAND_AM33XX_BCH || SPL_NAND_SIMPLE || \ + (SPL_NAND_SUPPORT && NAND_ATMEL) + default y + help + Some controllers require waiting for 5 address cycles when issuing + some commands, on NAND chips larger than 128MiB. + choice prompt "NAND bad block marker/indicator positon in the OOB" depends on SPL_NAND_AM33XX_BCH || SPL_NAND_DENALI || SPL_NAND_SIMPLE || \ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index a8ee559825..ec34992b2d 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -180,7 +180,6 @@ #ifdef CONFIG_MTD_RAW_NAND /* NAND: device related configs */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE /* NAND: driver related configs */ #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h index 087b2d0e6d..43b8363000 100644 --- a/include/configs/am335x_guardian.h +++ b/include/configs/am335x_guardian.h @@ -106,9 +106,6 @@ #define CONFIG_SYS_BOOTCOUNT_LE #ifdef CONFIG_MTD_RAW_NAND - -#define CONFIG_SYS_NAND_5_ADDR_CYCLE - #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h index 71ecd554b0..ed2685d19e 100644 --- a/include/configs/am335x_igep003x.h +++ b/include/configs/am335x_igep003x.h @@ -106,7 +106,6 @@ #define CONFIG_SYS_NAND_ONFI_DETECTION 1 /* NAND config */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ 18, 19, 20, 21, 22, 23, 24, 25, \ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index e36cf25cf1..1ce0c47810 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -19,7 +19,6 @@ /* Board NAND Info. */ #ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, \ 11, 12, 13, 14, 16, 17, 18, 19, 20, \ 21, 22, 23, 24, 25, 26, 27, 28, 30, \ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index ea2b564f33..ad31e2eefd 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -157,7 +157,6 @@ /* NAND support */ #ifdef CONFIG_MTD_RAW_NAND /* NAND: device related configs */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE /* NAND: driver related configs */ #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 714710327c..6f75ca5dce 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -95,7 +95,6 @@ #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 2611f5b16a..48ec065a34 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -115,6 +115,5 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #endif diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 08ce67a5e6..798a100411 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -98,6 +98,5 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #endif diff --git a/include/configs/baltos.h b/include/configs/baltos.h index 8c5d1e7731..8ada88dbf8 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -209,7 +209,6 @@ #ifndef CONFIG_NOR_BOOT #ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ 18, 19, 20, 21, 22, 23, 24, 25, \ diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 2f499b3994..1dfe7d0473 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -146,7 +146,6 @@ NANDTGTS \ #define CONFIG_SYS_NAND_BASE 0x8000000 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */ #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ 18, 19, 20, 21, 22, 23, 24, 25, \ diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index 704b2e61a8..ed918a7cf2 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -123,7 +123,6 @@ #define CONFIG_SYS_BOOTCOUNT_BE /* NAND: device related configs */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE /* NAND: driver related configs */ #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 7cb56cbed8..685f226a5f 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -85,7 +85,6 @@ /* Network. */ /* NAND support */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ 18, 19, 20, 21, 22, 23, 24, 25, \ diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index f5521c5233..c6cdcf1312 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -23,7 +23,6 @@ /* NAND support */ #define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 6509366439..298442057c 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -188,7 +188,6 @@ /* NAND stuff */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES #endif diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 027a1c3341..de432a4ff7 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -97,7 +97,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 068e5f6f03..f7c5d400cf 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -121,7 +121,6 @@ #undef CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 #define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 89221a8429..66c8cd2b62 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -133,7 +133,6 @@ /* Defines for SPL */ /* NAND boot config */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 10, 11, 12, 13} diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 975e1cde8b..b5a2f6cb38 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -80,7 +80,6 @@ /* NAND support */ #ifdef CONFIG_MTD_RAW_NAND /* NAND: device related configs */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE /* NAND: driver related configs */ #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h index d69f2a0dc9..45414f9e61 100644 --- a/include/configs/gardena-smart-gateway-at91sam.h +++ b/include/configs/gardena-smart-gateway-at91sam.h @@ -60,8 +60,6 @@ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_5_ADDR_CYCLE - #define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS #define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index 4b45e33ad1..eb073b94b9 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -137,7 +137,6 @@ #ifdef CONFIG_NAND_MXS # define CONFIG_SYS_MAX_NAND_DEVICE 1 # define CONFIG_SYS_NAND_BASE 0x40000000 -# define CONFIG_SYS_NAND_5_ADDR_CYCLE # define CONFIG_SYS_NAND_ONFI_DETECTION # define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE # define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h index e49370305c..520cc17601 100644 --- a/include/configs/imx6_logic.h +++ b/include/configs/imx6_logic.h @@ -129,7 +129,6 @@ /* NAND stuff */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h index 5cd51a4af0..48b8a30919 100644 --- a/include/configs/mx6sabreauto.h +++ b/include/configs/mx6sabreauto.h @@ -52,7 +52,6 @@ /* NAND stuff */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ONFI_DETECTION /* DMA stuff, needed for GPMI/MXS NAND support */ diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 62b8de3c1a..7d8b80efdb 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -106,7 +106,6 @@ /* NAND stuff */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ONFI_DETECTION /* DMA stuff, needed for GPMI/MXS NAND support */ diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index 42b729b40b..83a94f49c2 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -111,7 +111,6 @@ /* NAND stuff */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ONFI_DETECTION /* DMA stuff, needed for GPMI/MXS NAND support */ diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 64f017ab77..b5c525dc78 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -114,7 +114,6 @@ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x60000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #endif /* OCOTP */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 7ba1902130..30c6d2cd61 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -22,7 +22,6 @@ #if defined(CONFIG_MTD_RAW_NAND) #define CONFIG_SYS_FLASH_BASE NAND_BASE #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 88590efe71..8d1233c075 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -27,7 +27,6 @@ #if defined(CONFIG_MTD_RAW_NAND) #define CONFIG_SYS_FLASH_BASE NAND_BASE #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 8f3c7d184d..ced449d7ad 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -75,7 +75,6 @@ #define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024) /* NAND config */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ 18, 19, 20, 21, 22, 23, 24, 25, \ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 50ff5f84bd..0da7388bee 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -18,7 +18,6 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ /* NAND devices */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \ 13, 14, 16, 17, 18, 19, 20, 21, 22, \ 23, 24, 25, 26, 27, 28, 30, 31, 32, \ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 056cf90b53..4227610566 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -122,7 +122,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST diff --git a/include/configs/phycore_am335x_r2.h b/include/configs/phycore_am335x_r2.h index 02d124549b..e398a018c5 100644 --- a/include/configs/phycore_am335x_r2.h +++ b/include/configs/phycore_am335x_r2.h @@ -85,7 +85,6 @@ #ifdef CONFIG_MTD_RAW_NAND /* NAND: device related configs */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE /* NAND: driver related configs */ #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 029a7cb62a..6f4bae31cd 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -85,7 +85,6 @@ #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 44fc16404b..198d8dac73 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -70,7 +70,6 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE /* Falcon boot support on raw MMC */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x100 /* 128 KiB */ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index b54e63903d..1bca98c662 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -82,6 +82,5 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #endif diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 4aba68eb1b..652c4df4d5 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -46,6 +46,5 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #endif diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 64113b4c76..4278e17afa 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -46,6 +46,5 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #endif diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 4d613c4361..8fea6073d6 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -73,7 +73,6 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ 18, 19, 20, 21, 22, 23, 24, 25, \ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 41881ea050..cc5f5380cf 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -166,7 +166,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_SIZE (SZ_256M) #define CONFIG_SYS_NAND_ECCSIZE 256 diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 9176f1c7cb..a4f1628256 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -126,7 +126,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ /* NAND boot config */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\ 48, 49, 50, 51, 52, 53, 54, 55,\ 56, 57, 58, 59, 60, 61, 62, 63} diff --git a/include/configs/taurus.h b/include/configs/taurus.h index fef55d850c..fa4b6f40d7 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -168,7 +168,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_SIZE (256 * SZ_1M) #define CONFIG_SYS_NAND_ECCSIZE 256 diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 74dc9fe155..3124c783ca 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -57,7 +57,6 @@ /* NAND: SPL related configs */ /* NAND: device related configs */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE /* NAND: driver related configs */ #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 8d0d9cae55..42136a18f6 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2359,7 +2359,6 @@ CONFIG_SYS_MX7_HCLK CONFIG_SYS_MXS_VDD5V_ONLY CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST CONFIG_SYS_NAND_4_ADDR_CYCLE -CONFIG_SYS_NAND_5_ADDR_CYCLE CONFIG_SYS_NAND_ACTL_ALE CONFIG_SYS_NAND_ACTL_CLE CONFIG_SYS_NAND_ACTL_DELAY