From: Andre Przywara Date: Wed, 13 Jul 2022 15:27:56 +0000 (+0100) Subject: sunxi: armv8: fel: load only 32-bit values X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4871650c95324c3a8697eab213ed327895b53082;p=u-boot.git sunxi: armv8: fel: load only 32-bit values Both the values and the MMIO addresses that we need during the 64-bit FEL restore are smaller than 2^32, so we don't need to do any 64-bit loads. Change the loads to only load 32 bits worth of data, that saves us some bytes for storing the values. Signed-off-by: Andre Przywara Reviewed-by: Samuel Holland Tested-by: Samuel Holland --- diff --git a/arch/arm/cpu/armv8/fel_utils.S b/arch/arm/cpu/armv8/fel_utils.S index 5266515f14..2fe38a1a04 100644 --- a/arch/arm/cpu/armv8/fel_utils.S +++ b/arch/arm/cpu/armv8/fel_utils.S @@ -39,15 +39,15 @@ ENTRY(return_to_fel) adr x1, fel_stash_addr // to find the fel_stash address in AA32 str w2, [x1] - ldr x0, =0xfa50392f // CPU hotplug magic + ldr w0, =0xfa50392f // CPU hotplug magic #ifdef CONFIG_MACH_SUN50I_H616 - ldr x2, =(SUNXI_R_CPUCFG_BASE + 0x1c0) + ldr w2, =(SUNXI_R_CPUCFG_BASE + 0x1c0) str w0, [x2], #0x4 #elif CONFIG_MACH_SUN50I_H6 - ldr x2, =(SUNXI_RTC_BASE + 0x1b8) // BOOT_CPU_HP_FLAG_REG + ldr w2, =(SUNXI_RTC_BASE + 0x1b8) // BOOT_CPU_HP_FLAG_REG str w0, [x2], #0x4 #else - ldr x2, =(SUNXI_CPUCFG_BASE + 0x1a4) // offset for CPU hotplug base + ldr w2, =(SUNXI_CPUCFG_BASE + 0x1a4) // offset for CPU hotplug base str w0, [x2, #0x8] #endif adr x0, back_in_32