From: Stephen Warren Date: Thu, 18 Aug 2016 16:53:33 +0000 (-0600) Subject: spi: tegra: fix hang in set_mode() X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4832c7f5f79feebf8549f33c7257dec47c336470;p=u-boot.git spi: tegra: fix hang in set_mode() In tegra20_slink.c, the set_mode() function may be executed before the SPI bus is claimed the first time, and hence the clocks to the SPI controller may not be running. If so, any register read/write at this time will hang the CPU. Fix this by ensuring the clock is running as soon as the driver is probed. This is observed on the Tegra30 Beaver board. Apply the same clock initialization fix to all other Tegra SPI drivers so that if set_mode() is ever implemented there, the same bug will not appear. Note that tegra114_spi.c already operates in this fashion. The clock manipulation code is copied from claim_bus() to probe() rather than moved. This ensures that any calls to set_speed() take effect; the clock can't be set once during probe and left unchanged. Fixes: 5cb1b7b395c0 ("spi: tegra20: Add support for mode selection") Cc: Mirza Krak Signed-off-by: Stephen Warren Reviewed-by: Simon Glass Signed-off-by: Tom Warren --- diff --git a/drivers/spi/tegra20_sflash.c b/drivers/spi/tegra20_sflash.c index 6888a96139..ce3a2d398c 100644 --- a/drivers/spi/tegra20_sflash.c +++ b/drivers/spi/tegra20_sflash.c @@ -122,6 +122,10 @@ static int tegra20_sflash_probe(struct udevice *bus) priv->freq = plat->frequency; priv->periph_id = plat->periph_id; + /* Change SPI clock to correct frequency, PLLP_OUT0 source */ + clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH, + priv->freq); + return 0; } diff --git a/drivers/spi/tegra20_slink.c b/drivers/spi/tegra20_slink.c index 238edec23b..e1da23b7b4 100644 --- a/drivers/spi/tegra20_slink.c +++ b/drivers/spi/tegra20_slink.c @@ -128,6 +128,10 @@ static int tegra30_spi_probe(struct udevice *bus) priv->freq = plat->frequency; priv->periph_id = plat->periph_id; + /* Change SPI clock to correct frequency, PLLP_OUT0 source */ + clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH, + priv->freq); + return 0; } diff --git a/drivers/spi/tegra210_qspi.c b/drivers/spi/tegra210_qspi.c index 6bbbe93839..026cff0c15 100644 --- a/drivers/spi/tegra210_qspi.c +++ b/drivers/spi/tegra210_qspi.c @@ -131,6 +131,9 @@ static int tegra210_qspi_probe(struct udevice *bus) priv->freq = plat->frequency; priv->periph_id = plat->periph_id; + /* Change SPI clock to correct frequency, PLLP_OUT0 source */ + clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH, priv->freq); + return 0; }