From: Yangbo Lu <yangbo.lu@nxp.com>
Date: Fri, 8 Dec 2017 07:35:35 +0000 (+0800)
Subject: armv8: ls1012ardb: clean up definitions for I2C IO expanders
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=481fb01f41feec75366cd0790ff672638384b60a;p=u-boot.git

armv8: ls1012ardb: clean up definitions for I2C IO expanders

This patch is to clean up definitions for I2C IO expanders.
The value 0x10 of __SW_BOOT_EMU is wrong. It should be 0x2.
Fixed it in this patch.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
---

diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
index c6c1c71202..2f1d63742a 100644
--- a/board/freescale/ls1012ardb/ls1012ardb.c
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -35,25 +35,25 @@ int checkboard(void)
 	/* Initialize i2c early for Serial flash bank information */
 	i2c_set_bus_num(0);
 
-	if (i2c_read(I2C_MUX_IO1_ADDR, 1, 1, &in1, 1) < 0) {
+	if (i2c_read(I2C_MUX_IO_ADDR, I2C_MUX_IO_1, 1, &in1, 1) < 0) {
 		printf("Error reading i2c boot information!\n");
 		return 0; /* Don't want to hang() on this error */
 	}
 
 	puts("Version");
-	if ((in1 & (~__SW_REV_MASK)) == __SW_REV_A)
+	if ((in1 & SW_REV_MASK) == SW_REV_A)
 		puts(": RevA");
-	else if ((in1 & (~__SW_REV_MASK)) == __SW_REV_B)
+	else if ((in1 & SW_REV_MASK) == SW_REV_B)
 		puts(": RevB");
 	else
 		puts(": unknown");
 
 	printf(", boot from QSPI");
-	if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_EMU)
+	if ((in1 & SW_BOOT_MASK) == SW_BOOT_EMU)
 		puts(": emu\n");
-	else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK1)
+	else if ((in1 & SW_BOOT_MASK) == SW_BOOT_BANK1)
 		puts(": bank1\n");
-	else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK2)
+	else if ((in1 & SW_BOOT_MASK) == SW_BOOT_BANK2)
 		puts(": bank2\n");
 	else
 		puts("unknown\n");
@@ -152,7 +152,7 @@ int esdhc_status_fixup(void *blob, const char *compat)
 	 *	10 - eMMC Memory
 	 *	11 - SPI
 	 */
-	if (i2c_read(I2C_MUX_IO1_ADDR, 0, 1, &io, 1) < 0) {
+	if (i2c_read(I2C_MUX_IO_ADDR, I2C_MUX_IO_0, 1, &io, 1) < 0) {
 		printf("Error reading i2c boot information!\n");
 		return 0; /* Don't want to hang() on this error */
 	}
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index a14021f589..d0ceae24f7 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -24,14 +24,16 @@
  * I2C IO expander
  */
 
-#define I2C_MUX_IO1_ADDR	0x24
-#define __SW_BOOT_MASK		0xFC
-#define __SW_BOOT_EMU		0x10
-#define __SW_BOOT_BANK1		0x00
-#define __SW_BOOT_BANK2		0x01
-#define __SW_REV_MASK		0x07
-#define __SW_REV_A		0xF8
-#define __SW_REV_B		0xF0
+#define I2C_MUX_IO_ADDR		0x24
+#define I2C_MUX_IO_0		0
+#define I2C_MUX_IO_1		1
+#define SW_BOOT_MASK		0x03
+#define SW_BOOT_EMU		0x02
+#define SW_BOOT_BANK1		0x00
+#define SW_BOOT_BANK2		0x01
+#define SW_REV_MASK		0xF8
+#define SW_REV_A		0xF8
+#define SW_REV_B		0xF0
 
 /*  MMC  */
 #ifdef CONFIG_MMC