From: Wolfgang Denk Date: Sun, 12 Mar 2006 20:49:19 +0000 (+0100) Subject: Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=47705af5daafb508339907f6c4fe6d13b441bf9a;p=u-boot.git Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads --- 47705af5daafb508339907f6c4fe6d13b441bf9a diff --cc CHANGELOG index 42ed5c9cb0,6c66441708..7906abecd8 --- a/CHANGELOG +++ b/CHANGELOG @@@ -2,286 -2,10 +2,289 @@@ Changes since U-Boot 1.1.4: ====================================================================== + * Added PCI support for MPC8349ADS board + Patch by Kumar Gala 11 Jan 2006 + -* Add support for 28F256J3A flah (=> 64 MB) on PM520 board +* Enable address translation on MPC83xx + Patch by Kumar Gala, 10 Feb 2006 + +* Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx + Patch by Kumar Gala, 25 Jan 2006 + +* Fixed defines for MPC83xx SICRL register to match current specs + Patch by Kumar Gala, 23 Jan 2006 + +* Only disable the MPC83xx watchdog if its enabled out of reset. + If its disabled out of reset SW can later enable it if so desired + Patch by Kumar Gala, 11 Jan 2006 + +* Allow config of GPIO direction & data registers at boot on 83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Enable time handling on 83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Make System IO Config Registers board configurable on MPC83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Fixed PCI indirect config ops to handle multiple PCI controllers + We need to adjust the bus number we are trying to access based + on which PCI controller its on + Patch by Kumar Gala, 12 Jan 2006 + +* Report back PCI bus when doing table based device config + Patch by Kumar Gala, 11 Jan 2006 + +* Added support for PCI prefetchable region and BARs + If a host controller sets up a region as prefetchable and + a device's BAR denotes it as prefetchable, allocate the + BAR into the prefetch region. + + If a BAR is prefetchable and no prefetchable region has + been setup by the controller we fall back to allocating + the BAR into the normally memory region. + Patch by Kumar Gala, 11 Jan 2006 + +* Add helper function for generic flat device tree fixups for mpc83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Add support for passing initrd information via flat device tree + Patch by Kumar Gala, 11 Jan 2006 + +* Added OF_STDOUT_PATH and OF_SOC + + OF_STDOUT_PATH specifies the path to the device the kernel can use + for console output + + OF_SOC specifies the proper name of the SOC node if one exists. + Patch by Kumar Gala, 11 Jan 2006 + +* Allow board code to fixup the flat device tree before booting a kernel + Patch by Kumar Gala, 11 Jan 2006 + +* Added CONFIG_ options for bd_t and env in flat dev tree + + CONFIG_OF_HAS_BD_T will put a copy of the bd_t + into the resulting flat device tree. + + CONFIG_OF_HAS_UBOOT_ENV will copy the environment + variables from u-boot into the flat device tree + + Patch by Kumar Gala, 11 Jan 2006 + +* Add support for the DHCP vendor optional bootfile (#67). + Ignores the vendor TFTP server name option (#66). + Patch by Murray Jensen, 30 Jun 2005 + +* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode + Patch by Andy Fleming, 14 Jun 2005 + +* Fix bad register definitions for LTX971 PHY on MPC85xx boards. + Patch by Gerhard Jaeger, 21 Jun 2005 + +* Add netconsole and some more commands to RPXlite_DW board + Patch by Sam Song, 19 Jun 2005 + +* Fix bad declaration on pci_cfgfunc_nothing + Patch by Sam Song, 19 Jun 2005 + +* Adjust "echo" as a default command + Patch by Sam Song, 19 Jun 2005 + +* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC + Patch by KokHow Teh, 16 Jun 2005 + +* Add crc of data to jffs2 (in jffs2_1pass_build_lists()). + Patch by Rick Bronson, 15 Jun 2005 + +* Coding Style cleanup + +* Avoid dereferencing NULL in find_cmd() if no valid commands were found + Patch by Andrew Dyer, 13 Jun 2005 + +* Add ADI Blackfin support + - add support for Analog Devices Blackfin BF533 CPU + - add support for the ADI BF533 Stamp uClinux board + - add support for the ADI BF533 EZKit board + Patches by Richard Klingler, 11 Jun 2005 + +* Add loads of ntohl() in image header handling + Patch by Steven Scholz, 10 Jun 2005 + +* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment + variable to set clock + Patch by Yuli Barcohen, 05 Jun 2005 + +* RPXlite configuration fixes + - Use correct flash sector size + - Use correct memory test end address + - Add support for bzip2 compression + - Various small fixes + Patch by Yuli Barcohen, 05 Jun 2005 + +* Memory configuration changes for ZPC.1900 board + - Fix SDRAM timing on both local bus and 60x bus + - Add support for second flash bank (SIMM) + - Change boot flash base + Patch by Yuli Barcohen, 05 Jun 2005 + +* Add support for Adder boards with 16MB SDRAM; + add support for second FEC on Adder87x board. + Patch by Yuli Barcohen, 05 Jun 2005 + +* Fix conditional for including ks8695eth driver + Patch by Greg Ungerer, 04 Jun 2005 + +* Fix Makefile: include config.mk only after CROSS_COMPILE is defined + Patch by Friedrich Lobenstock, 02 Jun 2005 + +* Fix comment in common/soft_i2c.c + Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005 + +* Cleanup compiler warnings. + Patch by Greg Ungerer, 21 May 2005 + +* Word alignment fixes for word aligned NS16550 UART + Patch by Jean-Paul Saman, 01 Mar 2005 + + Fixes bug with UART that only supports word aligned access: removed + "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some + (broken!) versions of GCC generate byte accesses when encountering + the packed attribute regardless if the struct is already correctly + aligned for a platform. Peripherals that can only handle word + aligned access won't work properly when accessed with byte access. + The struct NS16550 is already word aligned for REG_SIZE = 4, so + there is no need to packed the struct in that case. + +* Fix behaviour if gatewayip is not set + Patch by Robin Gilks, 23 Dec 2004 + +* Fix cleanup for netstart board. + Remove build results from repository + +* Some code cleanup for GCC 4.x + +* Fixes to support environment in NAND flash; + enable NAND flash based environment for delta board. + +* Add support for Intel Monahans CPU on Zylonite and Delta boards + (This is Work in Progress!) + +* Add support for TQM8260-AI boards. + +* Minor code cleanup + +* Merge the new NAND code (testing-NAND brach); see doc/README.nand + Rewrite of NAND code based on what is in 2.6.12 Linux kernel + Patch by Ladislav Michl, 29 Jun 2005 + +* Add lowboot target to mcc200 board + Patch by Stefan Roese, 4 Mar 2006 + +* Fix problem with flash_get_size() from CFI driver update + Patch by Stefan Roese, 1 Mar 2006 + +* Make CFG_NO_FLASH work on ARM systems + Patch by Markus Klotzbuecher, 27 Feb 2006 + +* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock, + use hush shell. + +* Convert mcc200 to use common CFI flash driver + Patch by Stefan Roese, 28 Feb 2006 + +* Add env-variable "unlock" to handle initial state of sectors + (locked/unlocked). + + Only the U-Boot image and it's environment is protected, + all other sectors are unprotected (unlocked) if flash + hardware protection is used (CFG_FLASH_PROTECTION) and + the environment variable "unlock" is set to "yes". + + Patch by Stefan Roese, 28 Feb 2006 + +* Update drivers/cfi_flash.c: + - find_sector() called in both versions of flash_write_cfiword() + Patch by Peter Pearse, 27th Feb 2006 + +* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode + Patch by Jose Maria Lopez, 16 Jan 2006 + +* Add support for AMD/Spansion Flashes in flash_write_cfibuffer + Patch by Alex Bastos and Thomas Schaefer, 2005-08-29 + +* Changes/fixes for drivers/cfi_flash.c: + We *should* check if there are any error bits if the previous call + returned ERR_OK (Otherwise we will have output an error message in + flash_status_check() already.) The original code would only check for + error bits if flash_status_check() returns ERR_TIMEOUT. + Patch by Marcus Hall, 23 Aug 2005 + +* Changes/fixes for drivers/cfi_flash.c: + - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c + - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c + Patch by Sangmoon Kim, 19 Aug 2005 + +* Fixes for drivers/cfi_flash.c: + - Fix wrong timeout value usage in flash_status_check() + - Round write_tout up when converting to msec in flash_get_size() + - Remove clearing flash status at the end of flash_write_cfibuffer() + which sets Intel 28F640J3 flash back to command mode on CSB472 + Patch by Tolunay Orkun, 02 July 2005 + +* Add basic support for the SMMACO4 Board from PanDaCom. + Patch by Heiko Schocher, 20 Feb 2006 + +* Add GIT version information (commid ID) to untagged U-Boot versions + + As done in the linux kernel, the U-Boot version (U_BOOT_VERSION) + of all unreleased (untagged) U-Boot images will be automatically + extended upon compiletime with a part of the GIT commit ID and + possibly with "dirty" if uncommited changes are detected. + + Here an example for the resulting version: + "U-Boot 1.1.4-g3457ac18-dirty" + + The version is now maintained in the toplevel Makefile and the + version headers are autogenerated. + + Patch by Stefan Roese, 9 Feb 2006 + +* Update default environment for INKA4x00 board. + +* Convert CPCI750 to use common CFI flash driver + Patch by Reinhard Arlt, 8 Feb 2006 + +* Various changes to esd HH405 board specific files + Patch by Matthias Fuchs, 07 Feb 2006 + +* Cleanup U-Boot boot messages on ARM. + + To match the U-Boot user interface on ARM platforms to the U-Boot + standard (as on PPC platforms), some messages with debug character + are removed from the default U-Boot build. + Enable DEBUG for lib_arm/board.c to enable debug messages. + New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options. + Patch by Stefan Roese, 24 Jan 2006 + +* Fix various compiler warnings on ppc4xx builds (ELDK 4.0) + Patch by Stefan Roese, 18 Jan 2006 + +* Add VGA support (CT69000) to CPCI750 board. + Insert missing __le32_to_cpu() for filesize in ext2fs_read_file(). + Patch by Reinhard Arlt, 30 Dec 2005 + +* PMC405 and CPCI405: Moved configuration of pci resources + into config file. + PMC405 and CPCI2DP: Added firmware download and booting via pci. + Patch by Matthias Fuchs, 20 Dec 2005 + +* Fix 28F256J3A support on PM520 board + (without bank-switching only 32 MB can be accessed) + +* Fix mkimage bug with multifile images created on 64 bit systems. + +* Add support for 28F256J3A flash (=> 64 MB) on PM520 board * Fix compiler problem with at91rm9200dk board. Patch by Eugen Bigz, 19 Dec 2005