From: Lukasz Majewski Date: Fri, 19 May 2023 10:43:56 +0000 (+0200) Subject: arm: Kconfig: Switch XEA (imx287 based) board to use CONFIG_PL01X_SERIAL X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=474c0866514677d40594490d250bc6266319bb6c;p=u-boot.git arm: Kconfig: Switch XEA (imx287 based) board to use CONFIG_PL01X_SERIAL The CONFIG_PL011 used by all other ARCH_MX28 based boards is not supporting DM_SERIAL. Instead, other define - namely CONFIG_PL01X_SERIAL shall be used by boards supporting DM_SERIAL. Signed-off-by: Lukasz Majewski --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 99264a6478..4604d41410 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -919,7 +919,7 @@ config ARCH_MX28 bool "NXP i.MX28 family" select CPU_ARM926EJS select GPIO_EXTRA_HEADER - select PL011_SERIAL + select PL011_SERIAL if !TARGET_XEA select MACH_IMX select SUPPORT_SPL diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig index 5cffc26103..b4a281e82d 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -45,6 +45,7 @@ config TARGET_MX28EVK config TARGET_XEA bool "Support XEA" + select PL01X_SERIAL endchoice