From: Tien Fong Chee <tien.fong.chee@intel.com>
Date: Sun, 7 Nov 2021 15:08:56 +0000 (+0800)
Subject: arm: socfpga: arria10: Enable double peripheral RBF configuration
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4720b83d2c711062cfb55f03591b8f12c897d7cb;p=u-boot.git

arm: socfpga: arria10: Enable double peripheral RBF configuration

Double peripheral RBF configuration are needed on some devices or boards
to stabilize the IO configuration system.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Sin Hui Kho <sin.hui.kho@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
---

diff --git a/arch/arm/mach-socfpga/include/mach/misc.h b/arch/arm/mach-socfpga/include/mach/misc.h
index 74e8e2590f..8460acb00d 100644
--- a/arch/arm/mach-socfpga/include/mach/misc.h
+++ b/arch/arm/mach-socfpga/include/mach/misc.h
@@ -45,7 +45,9 @@ int is_fpga_config_ready(void);
 #endif
 
 void do_bridge_reset(int enable, unsigned int mask);
+void force_periph_program(unsigned int status);
 bool is_regular_boot_valid(void);
+bool is_periph_program_force(void);
 void set_regular_boot(unsigned int status);
 void socfpga_pl310_clear(void);
 void socfpga_get_managers_addr(void);
diff --git a/arch/arm/mach-socfpga/misc_arria10.c b/arch/arm/mach-socfpga/misc_arria10.c
index 634e63ed42..0ed2adfd84 100644
--- a/arch/arm/mach-socfpga/misc_arria10.c
+++ b/arch/arm/mach-socfpga/misc_arria10.c
@@ -32,6 +32,7 @@
 #define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3	0x98
 
 #define REGULAR_BOOT_MAGIC	0xd15ea5e
+#define PERIPH_RBF_PROG_FORCE	0x50455249
 
 #define QSPI_S25FL_SOFT_RESET_COMMAND	0x00f0ff82
 #define QSPI_N25_SOFT_RESET_COMMAND	0x00000001
@@ -131,6 +132,41 @@ void do_bridge_reset(int enable, unsigned int mask)
 		socfpga_bridges_reset();
 }
 
+/*
+ * This function set/unset flag with number "0x50455249" to
+ * handoff register isw_handoff[7] - 0xffd0624c
+ * This flag is used to force periph RBF program regardless FPGA status
+ * and double periph RBF config are needed on some devices or boards to
+ * stabilize the IO config system.
+ */
+void force_periph_program(unsigned int status)
+{
+	if (status)
+		writel(PERIPH_RBF_PROG_FORCE, socfpga_get_sysmgr_addr() +
+		       SYSMGR_A10_ISW_HANDOFF_BASE + SYSMGR_A10_ISW_HANDOFF_7);
+	else
+		writel(0, socfpga_get_sysmgr_addr() +
+		       SYSMGR_A10_ISW_HANDOFF_BASE + SYSMGR_A10_ISW_HANDOFF_7);
+}
+
+/*
+ * This function is used to check whether
+ * handoff register isw_handoff[7] contains
+ * flag for forcing the periph RBF program "0x50455249".
+ */
+bool is_periph_program_force(void)
+{
+	unsigned int status;
+
+	status = readl(socfpga_get_sysmgr_addr() +
+		       SYSMGR_A10_ISW_HANDOFF_BASE + SYSMGR_A10_ISW_HANDOFF_7);
+
+	if (status == PERIPH_RBF_PROG_FORCE)
+		return true;
+	else
+		return false;
+}
+
 /*
  * This function set/unset magic number "0xd15ea5e" to
  * handoff register isw_handoff[7] - 0xffd0624c
diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-socfpga/spl_a10.c
index 6450f75058..d2f454cd24 100644
--- a/arch/arm/mach-socfpga/spl_a10.c
+++ b/arch/arm/mach-socfpga/spl_a10.c
@@ -133,6 +133,20 @@ void spl_board_init(void)
 	} else if (!is_fpgamgr_early_user_mode()) {
 		/* Program IOSSM(early IO release) or full FPGA */
 		fpgamgr_program(buf, FPGA_BUFSIZ, 0);
+
+		/* Skipping double program for combined RBF */
+		if (!is_fpgamgr_user_mode()) {
+			/*
+			 * Expect FPGA entered early user mode, so
+			 * the flag is set to re-program IOSSM
+			 */
+			force_periph_program(true);
+
+			/* Re-program IOSSM to stabilize IO system */
+			fpgamgr_program(buf, FPGA_BUFSIZ, 0);
+
+			force_periph_program(false);
+		}
 	}
 
 	/* If the IOSSM/full FPGA is already loaded, start DDR */
diff --git a/drivers/fpga/socfpga_arria10.c b/drivers/fpga/socfpga_arria10.c
index b992e6f080..798e3a3f90 100644
--- a/drivers/fpga/socfpga_arria10.c
+++ b/drivers/fpga/socfpga_arria10.c
@@ -604,7 +604,8 @@ static int first_loading_rbf_to_buffer(struct udevice *dev,
 
 			if (strstr(uname, "fpga-periph") &&
 				(!is_fpgamgr_early_user_mode() ||
-				is_fpgamgr_user_mode())) {
+				is_fpgamgr_user_mode() ||
+				is_periph_program_force())) {
 				fpga_node_name = uname;
 				printf("FPGA: Start to program ");
 				printf("peripheral/full bitstream ...\n");