From: Aleksandar Gerasimovski Date: Tue, 16 Nov 2021 13:10:00 +0000 (+0000) Subject: configs/expu1: add u-boot update defconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=46f81d804a58fa3a69887fccdd304353b1c248de;p=u-boot.git configs/expu1: add u-boot update defconfig This patch adds default defconfig for u-boot update version, the u-boot update defconfig is a copy of the default (factory) defconfig with: - adapted text base and environment addresses - explicit flag that this is a field updated u-boot version At the time of implementation this version is only used to verify the update procedure, in future depend on the needs this defconfig can be extended with additional options. Signed-off-by: Aleksandar Gerasimovski Reviewed-by: Priyanka Jain --- diff --git a/board/keymile/pg-wcom-ls102xa/MAINTAINERS b/board/keymile/pg-wcom-ls102xa/MAINTAINERS index 9fabad1e7b..33db2b2bea 100644 --- a/board/keymile/pg-wcom-ls102xa/MAINTAINERS +++ b/board/keymile/pg-wcom-ls102xa/MAINTAINERS @@ -9,5 +9,6 @@ F: include/configs/pg-wcom-expu1.h F: configs/pg_wcom_seli8_defconfig F: configs/pg_wcom_seli8_update_defconfig F: configs/pg_wcom_expu1_defconfig +F: configs/pg_wcom_expu1_update_defconfig F: arch/arm/dts/ls1021a-pg-wcom-seli8.dts F: arch/arm/dts/ls1021a-pg-wcom-expu1.dts diff --git a/configs/pg_wcom_expu1_update_defconfig b/configs/pg_wcom_expu1_update_defconfig new file mode 100644 index 0000000000..0fd5ebc9a7 --- /dev/null +++ b/configs/pg_wcom_expu1_update_defconfig @@ -0,0 +1,83 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_TARGET_PG_WCOM_EXPU1=y +CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y +CONFIG_PG_WCOM_UBOOT_UPDATE=y +CONFIG_SYS_TEXT_BASE=0x60240000 +CONFIG_SYS_MALLOC_LEN=0x1004000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_KM_DEF_NETDEV="eth2" +CONFIG_KM_COMMON_ETH_INIT=y +CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3 +CONFIG_SYS_MEMTEST_START=0x80000000 +CONFIG_SYS_MEMTEST_END=0x9fffffff +CONFIG_ENV_SIZE=0x4000 +CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1" +CONFIG_BOOTCOUNT_BOOTLIMIT=3 +CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=3 +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_AUTOBOOT_PROMPT="Hit key to stop autoboot in %2ds\n" +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" +CONFIG_SILENT_CONSOLE=y +CONFIG_LAST_STAGE_INIT=y +CONFIG_MISC_INIT_R=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_CMD_CRAMFS=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash" +CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)" +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_FLASH=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_ENV_ADDR=0x60220000 +CONFIG_ENV_ADDR_REDUND=0x60200000 +CONFIG_DM=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_DDR_CLK_FREQ=50000000 +CONFIG_SYS_FSL_DDR3=y +CONFIG_SYS_I2C_LEGACY=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_FSL_IFC=y +CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_TSEC_ENET=y +CONFIG_SYS_QE_FW_ADDR=0x60020000 +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_NS16550=y +CONFIG_VERSION_VARIABLE=y