From: Marek Vasut Date: Sun, 12 Apr 2020 20:43:16 +0000 (+0200) Subject: net: rtl8139: Minor cleanup of rtl_poll() X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=468fd955626b650ebb7975d061d415682c91f041;p=u-boot.git net: rtl8139: Minor cleanup of rtl_poll() Rename the function to rtl8139_recv(), clean up various checkpatch errors, line-over-80 conditions, and malformed comments. No functional change. Signed-off-by: Marek Vasut Cc: Joe Hershberger --- diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c index cb1166ead2..d942ccf627 100644 --- a/drivers/net/rtl8139.c +++ b/drivers/net/rtl8139.c @@ -44,7 +44,7 @@ which reserves the ranges 0x00000-0x10000 and 0x98000-0xA0000. My interpretation of this "reserved" is that Etherboot may do whatever it likes, as long as its environment is kept intact (like the BIOS - variables). Hopefully fixed rtl_poll() once and for all. The symptoms + variables). Hopefully fixed rtl8139_recv() once and for all. The symptoms were that if Etherboot was left at the boot menu for several minutes, the first eth_poll failed. Seems like I am the only person who does this. First of all I fixed the debugging code and then set out for a long bug @@ -65,7 +65,7 @@ corruption because of exceeding 32K during runtime. 28 Jul 1999 (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de) - rtl_poll was quite broken: it used the RxOK interrupt flag instead + rtl8139_recv was quite broken: it used the RxOK interrupt flag instead of the RxBufferEmpty flag which often resulted in very bad transmission performace - below 1kBytes/s. @@ -202,7 +202,7 @@ static int rtl8139_probe(struct eth_device *dev, bd_t *bis); static int rtl8139_read_eeprom(unsigned int location, unsigned int addr_len); static void rtl8139_reset(struct eth_device *dev); static int rtl8139_send(struct eth_device *dev, void *packet, int length); -static int rtl_poll(struct eth_device *dev); +static int rtl8139_recv(struct eth_device *dev); static void rtl_disable(struct eth_device *dev); static int rtl_bcast_addr(struct eth_device *dev, const u8 *bcast_mac, int join) { @@ -247,7 +247,7 @@ int rtl8139_initialize(bd_t *bis) dev->init = rtl8139_probe; dev->halt = rtl_disable; dev->send = rtl8139_send; - dev->recv = rtl_poll; + dev->recv = rtl8139_recv; dev->mcast = rtl_bcast_addr; eth_register (dev); @@ -468,7 +468,7 @@ static int rtl8139_send(struct eth_device *dev, void *packet, int length) * Only acknlowledge interrupt sources we can properly * handle here - the RTL_REG_INTRSTATUS_RXOVERFLOW/ * RTL_REG_INTRSTATUS_RXFIFOOVER MUST be handled in the - * rtl_poll() function. + * rtl8139_recv() function. */ status &= RTL_REG_INTRSTATUS_TXOK | RTL_REG_INTRSTATUS_TXERR | RTL_REG_INTRSTATUS_PCIERR; @@ -499,27 +499,26 @@ static int rtl8139_send(struct eth_device *dev, void *packet, int length) return length; } -static int rtl_poll(struct eth_device *dev) +static int rtl8139_recv(struct eth_device *dev) { - unsigned int status; - unsigned int ring_offs; + const unsigned int rxstat = RTL_REG_INTRSTATUS_RXFIFOOVER | + RTL_REG_INTRSTATUS_RXOVERFLOW | + RTL_REG_INTRSTATUS_RXOK; unsigned int rx_size, rx_status; - int length=0; + unsigned int ring_offs; + unsigned int status; + int length = 0; ioaddr = dev->iobase; - if (inb(ioaddr + RTL_REG_CHIPCMD) & RTL_REG_CHIPCMD_RXBUFEMPTY) { + if (inb(ioaddr + RTL_REG_CHIPCMD) & RTL_REG_CHIPCMD_RXBUFEMPTY) return 0; - } status = inw(ioaddr + RTL_REG_INTRSTATUS); /* See below for the rest of the interrupt acknowledges. */ - outw(status & ~(RTL_REG_INTRSTATUS_RXFIFOOVER | - RTL_REG_INTRSTATUS_RXOVERFLOW | - RTL_REG_INTRSTATUS_RXOK), - ioaddr + RTL_REG_INTRSTATUS); + outw(status & ~rxstat, ioaddr + RTL_REG_INTRSTATUS); - debug_cond(DEBUG_RX, "rtl_poll: int %hX ", status); + debug_cond(DEBUG_RX, "%s: int %hX ", __func__, status); ring_offs = cur_rx % RX_BUF_LEN; /* ring_offs is guaranteed being 4-byte aligned */ @@ -530,38 +529,42 @@ static int rtl_poll(struct eth_device *dev) if ((rx_status & (RTL_STS_RXBADSYMBOL | RTL_STS_RXRUNT | RTL_STS_RXTOOLONG | RTL_STS_RXCRCERR | RTL_STS_RXBADALIGN)) || - (rx_size < ETH_ZLEN) || (rx_size > ETH_FRAME_LEN + 4)) { + (rx_size < ETH_ZLEN) || + (rx_size > ETH_FRAME_LEN + 4)) { printf("rx error %hX\n", rx_status); - rtl8139_reset(dev); /* this clears all interrupts still pending */ + /* this clears all interrupts still pending */ + rtl8139_reset(dev); return 0; } /* Received a good packet */ length = rx_size - 4; /* no one cares about the FCS */ - if (ring_offs+4+rx_size-4 > RX_BUF_LEN) { - int semi_count = RX_BUF_LEN - ring_offs - 4; + if (ring_offs + 4 + rx_size - 4 > RX_BUF_LEN) { unsigned char rxdata[RX_BUF_LEN]; + int semi_count = RX_BUF_LEN - ring_offs - 4; memcpy(rxdata, rx_ring + ring_offs + 4, semi_count); - memcpy(&(rxdata[semi_count]), rx_ring, rx_size-4-semi_count); + memcpy(&rxdata[semi_count], rx_ring, + rx_size - 4 - semi_count); net_process_received_packet(rxdata, length); debug_cond(DEBUG_RX, "rx packet %d+%d bytes", - semi_count, rx_size-4-semi_count); + semi_count, rx_size - 4 - semi_count); } else { net_process_received_packet(rx_ring + ring_offs + 4, length); - debug_cond(DEBUG_RX, "rx packet %d bytes", rx_size-4); + debug_cond(DEBUG_RX, "rx packet %d bytes", rx_size - 4); } flush_cache((unsigned long)rx_ring, RX_BUF_LEN); - cur_rx = (cur_rx + rx_size + 4 + 3) & ~3; + cur_rx = ROUND(cur_rx + rx_size + 4, 4); outw(cur_rx - 16, ioaddr + RTL_REG_RXBUFPTR); - /* See RTL8139 Programming Guide V0.1 for the official handling of - * Rx overflow situations. The document itself contains basically no - * usable information, except for a few exception handling rules. */ - outw(status & (RTL_REG_INTRSTATUS_RXFIFOOVER | - RTL_REG_INTRSTATUS_RXOVERFLOW | - RTL_REG_INTRSTATUS_RXOK), ioaddr + RTL_REG_INTRSTATUS); + /* + * See RTL8139 Programming Guide V0.1 for the official handling of + * Rx overflow situations. The document itself contains basically + * no usable information, except for a few exception handling rules. + */ + outw(status & rxstat, ioaddr + RTL_REG_INTRSTATUS); + return length; }