From: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Date: Tue, 30 Jun 2009 21:03:33 +0000 (+0200)
Subject: at91: Add CAN init function
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=45627fce18139a74e0755124d27376b520db156c;p=u-boot.git

at91: Add CAN init function

To enable CAN init, CONFIG_CAN has to be defined in the board config file
and at91_can_hw_init() has to be called in the board specific code.

CAN is available on AT91SAM9263 and AT91CAP9 SoC.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
---

diff --git a/cpu/arm926ejs/at91/at91cap9_devices.c b/cpu/arm926ejs/at91/at91cap9_devices.c
index c0024acf04..39e405fee1 100644
--- a/cpu/arm926ejs/at91/at91cap9_devices.c
+++ b/cpu/arm926ejs/at91/at91cap9_devices.c
@@ -3,6 +3,10 @@
  * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
+ * (C) Copyright 2009
+ * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
+ * esd electronic system design gmbh <www.esd.eu>
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -174,3 +178,14 @@ void at91_macb_hw_init(void)
 #endif
 }
 #endif
+
+#ifdef CONFIG_AT91_CAN
+void at91_can_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* CAN_TX */
+	at91_set_A_periph(AT91_PIN_PA13, 1);	/* CAN_RX */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_CAN);
+}
+#endif
diff --git a/cpu/arm926ejs/at91/at91sam9263_devices.c b/cpu/arm926ejs/at91/at91sam9263_devices.c
index 0f2613e7b8..f72efdfe80 100644
--- a/cpu/arm926ejs/at91/at91sam9263_devices.c
+++ b/cpu/arm926ejs/at91/at91sam9263_devices.c
@@ -3,6 +3,10 @@
  * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
+ * (C) Copyright 2009
+ * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
+ * esd electronic system design gmbh <www.esd.eu>
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -182,3 +186,14 @@ void at91_uhp_hw_init(void)
 	at91_set_gpio_output(AT91_PIN_PA24, 0);
 }
 #endif
+
+#ifdef CONFIG_AT91_CAN
+void at91_can_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* CAN_TX */
+	at91_set_A_periph(AT91_PIN_PA14, 1);	/* CAN_RX */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_CAN);
+}
+#endif
diff --git a/include/asm-arm/arch-at91/at91_common.h b/include/asm-arm/arch-at91/at91_common.h
index 9c4e019715..01840eede4 100644
--- a/include/asm-arm/arch-at91/at91_common.h
+++ b/include/asm-arm/arch-at91/at91_common.h
@@ -25,6 +25,7 @@
 #ifndef AT91_COMMON_H
 #define AT91_COMMON_H
 
+void at91_can_hw_init(void);
 void at91_macb_hw_init(void);
 void at91_serial_hw_init(void);
 void at91_serial0_hw_init(void);