From: Andre Przywara Date: Thu, 11 Jun 2020 11:03:19 +0000 (+0100) Subject: sata_sil: Enable DM_PCI operation X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=44a4042b01b547a100c387538196dacfa28b88f4;p=u-boot.git sata_sil: Enable DM_PCI operation Even though the sata_sil driver was converted over to the driver model, it still assumed that the PCI controller is using the legacy interface. Allow the "devno" member to be a struct udevice pointer and use DM_PCI_COMPAT to covert the rest of the interface. Signed-off-by: Andre Przywara Reviewed-by: Linus Walleij --- diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 6896fa8771..d5ba94c172 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -27,7 +27,11 @@ #include "sata_sil.h" +#ifdef CONFIG_DM_PCI +#define virt_to_bus(devno, v) dm_pci_virt_to_mem(devno, (void *) (v)) +#else #define virt_to_bus(devno, v) pci_virt_to_mem(devno, (void *) (v)) +#endif /* just compatible ahci_ops */ struct sil_ops { @@ -608,13 +612,18 @@ static int sil_init_sata(struct udevice *uc_dev, int dev) /* Save the private struct to block device struct */ #if !CONFIG_IS_ENABLED(BLK) sata_dev_desc[dev].priv = (void *)sata; + sata->devno = sata_info.devno; #else priv->sil_sata_desc[dev] = sata; priv->port_num = dev; +#ifdef CONFIG_DM_PCI + sata->devno = uc_dev->parent; +#else + sata->devno = sata_info.devno; +#endif /* CONFIG_DM_PCI */ #endif sata->id = dev; sata->port = port; - sata->devno = sata_info.devno; sprintf(sata->name, "SATA#%d", dev); sil_cmd_soft_reset(sata); tmp = readl(port + PORT_SSTATUS); diff --git a/drivers/ata/sata_sil.h b/drivers/ata/sata_sil.h index ef41e8259a..a300c0c388 100644 --- a/drivers/ata/sata_sil.h +++ b/drivers/ata/sata_sil.h @@ -21,7 +21,11 @@ struct sil_sata { u16 pio; u16 mwdma; u16 udma; - pci_dev_t devno; +#ifdef CONFIG_DM_PCI + struct udevice *devno; +#else + pci_dev_t devno; +#endif int wcache; int flush; int flush_ext;