From: Prabhakar Kushwaha Date: Mon, 9 Nov 2015 11:12:07 +0000 (+0530) Subject: armv8: LS2080A: Rename LS2085A to reflect LS2080A X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=449372148f6d9b5b8bded88ed8eee5c581a4bf81;p=u-boot.git armv8: LS2080A: Rename LS2085A to reflect LS2080A LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: Pratiyush Mohan Srivastava Signed-off-by: Prabhakar Kushwaha [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: York Sun --- diff --git a/README b/README index b5f6471670..4fee7066d5 100644 --- a/README +++ b/README @@ -611,6 +611,9 @@ The following options need to be configured: CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS Number of controllers used for other than main memory. + CONFIG_SYS_FSL_HAS_DP_DDR + Defines the SoC has DP-DDR used for DPAA. + CONFIG_SYS_FSL_SEC_BE Defines the SEC controller register space as Big Endian diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6542c38304..4fa52299ef 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -589,36 +589,46 @@ config TARGET_VEXPRESS64_JUNO bool "Support Versatile Express Juno Development Platform" select ARM64 -config TARGET_LS2085A_EMU - bool "Support ls2085a_emu" +config TARGET_LS2080A_EMU + bool "Support ls2080a_emu" select ARM64 select ARMV8_MULTIENTRY + help + Support for Freescale LS2080A_EMU platform + The LS2080A Development System (EMULATOR) is a pre silicon + development platform that supports the QorIQ LS2080A + Layerscape Architecture processor. -config TARGET_LS2085A_SIMU - bool "Support ls2085a_simu" +config TARGET_LS2080A_SIMU + bool "Support ls2080a_simu" select ARM64 select ARMV8_MULTIENTRY + help + Support for Freescale LS2080A_SIMU platform + The LS2080A Development System (QDS) is a pre silicon + development platform that supports the QorIQ LS2080A + Layerscape Architecture processor. -config TARGET_LS2085AQDS - bool "Support ls2085aqds" +config TARGET_LS2080AQDS + bool "Support ls2080aqds" select ARM64 select ARMV8_MULTIENTRY select SUPPORT_SPL help - Support for Freescale LS2085AQDS platform - The LS2085A Development System (QDS) is a high-performance - development platform that supports the QorIQ LS2085A + Support for Freescale LS2080AQDS platform + The LS2080A Development System (QDS) is a high-performance + development platform that supports the QorIQ LS2080A Layerscape Architecture processor. -config TARGET_LS2085ARDB - bool "Support ls2085ardb" +config TARGET_LS2080ARDB + bool "Support ls2080ardb" select ARM64 select ARMV8_MULTIENTRY select SUPPORT_SPL help - Support for Freescale LS2085ARDB platform. - The LS2085A Reference design board (RDB) is a high-performance - development platform that supports the QorIQ LS2085A + Support for Freescale LS2080ARDB platform. + The LS2080A Reference design board (RDB) is a high-performance + development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_HIKEY @@ -759,9 +769,9 @@ source "board/compulab/cm_t43/Kconfig" source "board/creative/xfi3/Kconfig" source "board/denx/m28evk/Kconfig" source "board/denx/m53evk/Kconfig" -source "board/freescale/ls2085a/Kconfig" -source "board/freescale/ls2085aqds/Kconfig" -source "board/freescale/ls2085ardb/Kconfig" +source "board/freescale/ls2080a/Kconfig" +source "board/freescale/ls2080aqds/Kconfig" +source "board/freescale/ls2080ardb/Kconfig" source "board/freescale/ls1021aqds/Kconfig" source "board/freescale/ls1021atwr/Kconfig" source "board/freescale/ls1043ardb/Kconfig" diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index 6fa08c8f3c..1beb4265a3 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -21,8 +21,8 @@ obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch2_serdes.o endif endif -ifneq ($(CONFIG_LS2085A),) -obj-$(CONFIG_SYS_HAS_SERDES) += ls2085a_serdes.o +ifneq ($(CONFIG_LS2080A),) +obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o else ifneq ($(CONFIG_LS1043A),) obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o diff --git a/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 index 417cf6dc24..db9359dd33 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 +++ b/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 @@ -7,7 +7,7 @@ Freescale LayerScape with Chassis Generation 3 This architecture supports Freescale ARMv8 SoCs with Chassis generation 3, -for example LS2085A. +for example LS2080A. DDR Layout ============ @@ -152,7 +152,7 @@ u-boot command nand write 0 To form the NAND image, build u-boot with NAND config, for example, -ls2085aqds_nand_defconfig. The image needed is u-boot-with-spl.bin. +ls2080aqds_nand_defconfig. The image needed is u-boot-with-spl.bin. The u-boot image should be written to match SRC_ADDR, in above example 0x20000. nand write 200000 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 0cb0afa0b3..c6e00b8c20 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -438,7 +438,7 @@ int print_cpuinfo(void) #ifdef CONFIG_SYS_DPAA_FMAN printf(" FMAN: %-4s MHz", strmhz(buf, sysinfo.freq_fman[0])); #endif -#ifdef CONFIG_FSL_LSCH3 +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR printf(" DP-DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2)); #endif puts("\n"); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 47599c1217..eafdd71a84 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -141,7 +141,7 @@ void append_mmu_masters(void *blob, const char *smmu_path, /* * The info below summarizes how streamID partitioning works - * for ls2085a and how it is conveyed to the OS via the device tree. + * for ls2080a and how it is conveyed to the OS via the device tree. * * -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA) * -all legacy devices get a unique ICID assigned and programmed in diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c index 4054c3c7d2..81cf47049f 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include "cpu.h" @@ -77,10 +78,14 @@ void get_sys_info(struct sys_info *sys_info) sys_info->freq_systembus = sysclk; #ifdef CONFIG_DDR_CLK_FREQ sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ; +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR sys_info->freq_ddrbus2 = CONFIG_DDR_CLK_FREQ; +#endif #else sys_info->freq_ddrbus = sysclk; +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR sys_info->freq_ddrbus2 = sysclk; +#endif #endif sys_info->freq_systembus *= (gur_in32(&gur->rcwsr[0]) >> @@ -91,9 +96,11 @@ void get_sys_info(struct sys_info *sys_info) sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >> FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) & FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK; +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >> FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) & FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK; +#endif for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) { /* @@ -133,7 +140,9 @@ int get_clocks(void) gd->cpu_clk = sys_info.freq_processor[0]; gd->bus_clk = sys_info.freq_systembus; gd->mem_clk = sys_info.freq_ddrbus; +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR gd->arch.mem2_clk = sys_info.freq_ddrbus2; +#endif #if defined(CONFIG_FSL_ESDHC) gd->arch.sdhc_clk = gd->bus_clk / 2; #endif /* defined(CONFIG_FSL_ESDHC) */ @@ -169,8 +178,10 @@ ulong get_ddr_freq(ulong ctrl_num) * DDR controller 0 & 1 are on memory complex 0 * DDR controler 2 is on memory complext 1 */ +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (ctrl_num >= 2) return gd->arch.mem2_clk; +#endif return gd->mem_clk; } diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls2085a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c similarity index 100% rename from arch/arm/cpu/armv8/fsl-layerscape/ls2085a_serdes.c rename to arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 637853d51f..b02e28a48b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -12,7 +12,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_LS2085A +#ifdef CONFIG_LS2080A static void erratum_a008751(void) { #ifdef CONFIG_SYS_FSL_ERRATUM_A008751 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index ba551aaa6e..a3410afee5 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -48,7 +48,7 @@ void board_init_f(ulong dummy) gd = &gdata; /* Clear global data */ memset((void *)gd, 0, sizeof(gd_t)); -#ifdef CONFIG_LS2085A +#ifdef CONFIG_LS2080A arch_cpu_init(); #endif #ifdef CONFIG_FSL_IFC @@ -56,7 +56,7 @@ void board_init_f(ulong dummy) #endif board_early_init_f(); timer_init(); -#ifdef CONFIG_LS2085A +#ifdef CONFIG_LS2080A env_init(); #endif get_clocks(); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 65e76ace90..74b3fa77b9 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -87,8 +87,8 @@ dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \ ls1021a-twr.dtb -dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2085a-qds.dtb \ - fsl-ls2085a-rdb.dtb +dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ + fsl-ls2080a-rdb.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ diff --git a/arch/arm/dts/fsl-ls2085a-qds.dts b/arch/arm/dts/fsl-ls2080a-qds.dts similarity index 80% rename from arch/arm/dts/fsl-ls2085a-qds.dts rename to arch/arm/dts/fsl-ls2080a-qds.dts index 4477e54154..547ec27837 100644 --- a/arch/arm/dts/fsl-ls2085a-qds.dts +++ b/arch/arm/dts/fsl-ls2080a-qds.dts @@ -1,5 +1,5 @@ /* - * Freescale ls2085a QDS board device tree source + * Freescale ls2080a QDS board device tree source * * Copyright 2013-2015 Freescale Semiconductor, Inc. * @@ -8,11 +8,11 @@ /dts-v1/; -#include "fsl-ls2085a.dtsi" +#include "fsl-ls2080a.dtsi" / { - model = "Freescale Layerscape 2085a QDS Board"; - compatible = "fsl,ls2085a-qds", "fsl,ls2085a"; + model = "Freescale Layerscape 2080a QDS Board"; + compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; aliases { spi1 = &dspi; diff --git a/arch/arm/dts/fsl-ls2085a-rdb.dts b/arch/arm/dts/fsl-ls2080a-rdb.dts similarity index 67% rename from arch/arm/dts/fsl-ls2085a-rdb.dts rename to arch/arm/dts/fsl-ls2080a-rdb.dts index 25278dfaf8..1a1813bdbf 100644 --- a/arch/arm/dts/fsl-ls2085a-rdb.dts +++ b/arch/arm/dts/fsl-ls2080a-rdb.dts @@ -1,5 +1,5 @@ /* - * Freescale ls2085a RDB board device tree source + * Freescale ls2080a RDB board device tree source * * Copyright 2013-2015 Freescale Semiconductor, Inc. * @@ -8,11 +8,11 @@ /dts-v1/; -#include "fsl-ls2085a.dtsi" +#include "fsl-ls2080a.dtsi" / { - model = "Freescale Layerscape 2085a RDB Board"; - compatible = "fsl,ls2085a-rdb", "fsl,ls2085a"; + model = "Freescale Layerscape 2080a RDB Board"; + compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; aliases { spi1 = &dspi; diff --git a/arch/arm/dts/fsl-ls2085a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi similarity index 97% rename from arch/arm/dts/fsl-ls2085a.dtsi rename to arch/arm/dts/fsl-ls2080a.dtsi index 96404c5d65..a5c579c5a5 100644 --- a/arch/arm/dts/fsl-ls2085a.dtsi +++ b/arch/arm/dts/fsl-ls2080a.dtsi @@ -1,5 +1,5 @@ /* - * Freescale ls2085a SOC common device tree source + * Freescale ls2080a SOC common device tree source * * Copyright 2013-2015 Freescale Semiconductor, Inc. * @@ -7,7 +7,7 @@ */ / { - compatible = "fsl,ls2085a"; + compatible = "fsl,ls2080a"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index 87bb937582..f79a0e8ba3 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -17,10 +17,10 @@ #define CONFIG_SYS_FSL_DDR /* Freescale DDR driver */ #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 -#if defined(CONFIG_LS2085A) +#if defined(CONFIG_LS2080A) #define CONFIG_MAX_CPUS 16 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 -#define CONFIG_NUM_DDR_CONTROLLERS 3 +#define CONFIG_NUM_DDR_CONTROLLERS 2 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 } #define SRDS_MAX_LANES 8 #define CONFIG_SYS_FSL_SRDS_1 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index 29039963f1..0923f4d9c4 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -8,8 +8,8 @@ #define _FSL_LAYERSCAPE_CPU_H static struct cpu_type cpu_type_list[] = { - CPU_TYPE_ENTRY(LS2085, LS2085, 8), CPU_TYPE_ENTRY(LS2080, LS2080, 8), + CPU_TYPE_ENTRY(LS2085, LS2085, 8), CPU_TYPE_ENTRY(LS2045, LS2045, 4), CPU_TYPE_ENTRY(LS1043, LS1043, 4), }; @@ -180,7 +180,7 @@ static const struct sys_mmu_table final_mmu_table[] = { CONFIG_SYS_PCIE2_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE }, { CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE }, -#ifdef CONFIG_LS2085A +#ifdef CONFIG_LS2080A { CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE }, #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h index e1043b5a5f..4787eecc3c 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h @@ -9,7 +9,7 @@ #include -#if defined(CONFIG_LS2085A) +#if defined(CONFIG_LS2080A) enum srds_prtcl { NONE = 0, PCIE1, diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 6a70d44305..134061c317 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -51,8 +51,8 @@ #define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x01020000) #define I2C4_BASE_ADDR (CONFIG_SYS_IMMR + 0x01030000) -#define CONFIG_SYS_LS2085A_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000) -#define CONFIG_SYS_LS2085A_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02110000) +#define CONFIG_SYS_LS2080A_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000) +#define CONFIG_SYS_LS2080A_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02110000) /* TZ Address Space Controller Definitions */ #define TZASC1_BASE 0x01100000 /* as per CCSR map. */ @@ -115,7 +115,9 @@ struct sys_info { unsigned long freq_processor[CONFIG_MAX_CPUS]; unsigned long freq_systembus; unsigned long freq_ddrbus; +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR unsigned long freq_ddrbus2; +#endif unsigned long freq_localbus; unsigned long freq_qe; #ifdef CONFIG_SYS_DPAA_FMAN diff --git a/arch/arm/include/asm/arch-fsl-layerscape/ls2085a_stream_id.h b/arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h similarity index 93% rename from arch/arm/include/asm/arch-fsl-layerscape/ls2085a_stream_id.h rename to arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h index 5c945309a9..954104b0ee 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/ls2085a_stream_id.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h @@ -7,7 +7,7 @@ #ifndef __FSL_STREAM_ID_H #define __FSL_STREAM_ID_H -/* Stream IDs on ls2085a devices are not hardwired and are +/* Stream IDs on ls2080a devices are not hardwired and are * programmed by sw. There are a limited number of stream IDs * available, and the partitioning of them is scenario dependent. * This header defines the partitioning between legacy, PCI, @@ -17,7 +17,7 @@ * on the specific hardware config-- e.g. perhaps not all * PEX controllers are in use. * - * On LS2085 stream IDs are programmed in AMQ registers (32-bits) for + * On LS2080 stream IDs are programmed in AMQ registers (32-bits) for * each of the different bus masters. The relationship between * the AMQ registers and stream IDs is defined in the table below: * AMQ bit streamID bit diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 4e3ea55e29..bd27281e79 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -46,7 +46,7 @@ struct arch_global_data { u32 omap_boot_mode; u8 omap_ch_flags; #endif -#ifdef CONFIG_FSL_LSCH3 +#if defined(CONFIG_FSL_LSCH3) && defined(CONFIG_SYS_FSL_HAS_DP_DDR) unsigned long mem2_clk; #endif }; diff --git a/board/freescale/ls2085a/Kconfig b/board/freescale/ls2080a/Kconfig similarity index 66% rename from board/freescale/ls2085a/Kconfig rename to board/freescale/ls2080a/Kconfig index 042f85b367..0b938ffb54 100644 --- a/board/freescale/ls2085a/Kconfig +++ b/board/freescale/ls2080a/Kconfig @@ -1,7 +1,7 @@ -if TARGET_LS2085A_EMU +if TARGET_LS2080A_EMU config SYS_BOARD - default "ls2085a" + default "ls2080a" config SYS_VENDOR default "freescale" @@ -10,14 +10,14 @@ config SYS_SOC default "fsl-layerscape" config SYS_CONFIG_NAME - default "ls2085a_emu" + default "ls2080a_emu" endif -if TARGET_LS2085A_SIMU +if TARGET_LS2080A_SIMU config SYS_BOARD - default "ls2085a" + default "ls2080a" config SYS_VENDOR default "freescale" @@ -26,6 +26,6 @@ config SYS_SOC default "fsl-layerscape" config SYS_CONFIG_NAME - default "ls2085a_simu" + default "ls2080a_simu" endif diff --git a/board/freescale/ls2080a/MAINTAINERS b/board/freescale/ls2080a/MAINTAINERS new file mode 100644 index 0000000000..bb25084576 --- /dev/null +++ b/board/freescale/ls2080a/MAINTAINERS @@ -0,0 +1,8 @@ +LS2080A BOARD +M: York Sun +S: Maintained +F: board/freescale/ls2080a/ +F: include/configs/ls2080a_emu.h +F: configs/ls2080a_emu_defconfig +F: include/configs/ls2080a_simu.h +F: configs/ls2080a_simu_defconfig diff --git a/board/freescale/ls2080a/Makefile b/board/freescale/ls2080a/Makefile new file mode 100644 index 0000000000..47c7c748ea --- /dev/null +++ b/board/freescale/ls2080a/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2014-15 Freescale Semiconductor +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls2080a.o +obj-y += ddr.o diff --git a/board/freescale/ls2085a/README b/board/freescale/ls2080a/README similarity index 97% rename from board/freescale/ls2085a/README rename to board/freescale/ls2080a/README index bc1d0bb4a7..7e53f1f1e4 100644 --- a/board/freescale/ls2085a/README +++ b/board/freescale/ls2080a/README @@ -1,4 +1,4 @@ -Freescale ls2085a_emu +Freescale ls2080a_emu This is a emulator target with limited peripherals. diff --git a/board/freescale/ls2085a/ddr.c b/board/freescale/ls2080a/ddr.c similarity index 99% rename from board/freescale/ls2085a/ddr.c rename to board/freescale/ls2080a/ddr.c index 4884fa24d0..47d73ef75a 100644 --- a/board/freescale/ls2085a/ddr.c +++ b/board/freescale/ls2080a/ddr.c @@ -71,7 +71,7 @@ found: pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, pbsp->wrlvl_ctl_3); - +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (ctrl_num == CONFIG_DP_DDR_CTRL) { /* force DDR bus width to 32 bits */ popts->data_bus_width = 1; @@ -79,6 +79,7 @@ found: popts->burst_length = DDR_BL8; popts->bstopre = 0; /* enable auto precharge */ } +#endif /* * Factors to consider for half-strength driver enable: * - number of DIMMs installed diff --git a/board/freescale/ls2085a/ddr.h b/board/freescale/ls2080a/ddr.h similarity index 100% rename from board/freescale/ls2085a/ddr.h rename to board/freescale/ls2080a/ddr.h diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2080a/ls2080a.c similarity index 98% rename from board/freescale/ls2085a/ls2085a.c rename to board/freescale/ls2080a/ls2080a.c index 27481e2ba3..827fbf0835 100644 --- a/board/freescale/ls2085a/ls2085a.c +++ b/board/freescale/ls2080a/ls2080a.c @@ -41,11 +41,13 @@ void detail_board_ddr_info(void) puts("\nDDR "); print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); print_ddr_info(0); +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (gd->bd->bi_dram[2].size) { puts("\nDP-DDR "); print_size(gd->bd->bi_dram[2].size, ""); print_ddr_info(CONFIG_DP_DDR_CTRL); } +#endif } int dram_init(void) diff --git a/board/freescale/ls2085ardb/Kconfig b/board/freescale/ls2080aqds/Kconfig similarity index 67% rename from board/freescale/ls2085ardb/Kconfig rename to board/freescale/ls2080aqds/Kconfig index cb40db9b55..2f997e9de1 100644 --- a/board/freescale/ls2085ardb/Kconfig +++ b/board/freescale/ls2080aqds/Kconfig @@ -1,8 +1,8 @@ -if TARGET_LS2085ARDB +if TARGET_LS2080AQDS config SYS_BOARD - default "ls2085ardb" + default "ls2080aqds" config SYS_VENDOR default "freescale" @@ -11,6 +11,6 @@ config SYS_SOC default "fsl-layerscape" config SYS_CONFIG_NAME - default "ls2085ardb" + default "ls2080aqds" endif diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS new file mode 100644 index 0000000000..3d82482f7e --- /dev/null +++ b/board/freescale/ls2080aqds/MAINTAINERS @@ -0,0 +1,8 @@ +LS2080A BOARD +M: Prabhakar Kushwaha +S: Maintained +F: board/freescale/ls2080aqds/ +F: board/freescale/ls2080a/ls2080aqds.c +F: include/configs/ls2080aqds.h +F: configs/ls2080aqds_defconfig +F: configs/ls2080aqds_nand_defconfig diff --git a/board/freescale/ls2085aqds/Makefile b/board/freescale/ls2080aqds/Makefile similarity index 83% rename from board/freescale/ls2085aqds/Makefile rename to board/freescale/ls2080aqds/Makefile index da69a7d22d..e0da8a5d77 100644 --- a/board/freescale/ls2085aqds/Makefile +++ b/board/freescale/ls2080aqds/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += ls2085aqds.o +obj-y += ls2080aqds.o obj-y += ddr.o obj-y += eth.o diff --git a/board/freescale/ls2085aqds/README b/board/freescale/ls2080aqds/README similarity index 95% rename from board/freescale/ls2085aqds/README rename to board/freescale/ls2080aqds/README index e4a6f69bfc..a4abb7e8ae 100644 --- a/board/freescale/ls2085aqds/README +++ b/board/freescale/ls2080aqds/README @@ -1,19 +1,19 @@ Overview -------- -The LS2085A Development System (QDS) is a high-performance computing, -evaluation, and development platform that supports the QorIQ LS2085A -Layerscape Architecture processor. The LS2085AQDS provides validation and -SW development platform for the Freescale LS2085A processor series, with +The LS2080A Development System (QDS) is a high-performance computing, +evaluation, and development platform that supports the QorIQ LS2080A +Layerscape Architecture processor. The LS2080AQDS provides validation and +SW development platform for the Freescale LS2080A processor series, with a complete debugging environment. -LS2085A SoC Overview +LS2080A SoC Overview ------------------ -The LS2085A integrated multicore processor combines eight ARM Cortex-A57 +The LS2080A integrated multicore processor combines eight ARM Cortex-A57 processor cores with high-performance data path acceleration logic and network and peripheral bus interfaces required for networking, telecom/datacom, wireless infrastructure, and mil/aerospace applications. -The LS2085A SoC includes the following function and features: +The LS2080A SoC includes the following function and features: - Eight 64-bit ARM Cortex-A57 CPUs - 1 MB platform cache with ECC @@ -50,7 +50,7 @@ The LS2085A SoC includes the following function and features: - Service processor (SP) provides pre-boot initialization and secure-boot capabilities - LS2085AQDS board Overview + LS2080AQDS board Overview ----------------------- - SERDES Connections, 16 lanes supporting: - PCI Express - 3.0 diff --git a/board/freescale/ls2085ardb/ddr.c b/board/freescale/ls2080aqds/ddr.c similarity index 98% rename from board/freescale/ls2085ardb/ddr.c rename to board/freescale/ls2080aqds/ddr.c index 8d71ae1264..ae681de35e 100644 --- a/board/freescale/ls2085ardb/ddr.c +++ b/board/freescale/ls2080aqds/ddr.c @@ -15,7 +15,9 @@ void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) { +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR u8 dq_mapping_0, dq_mapping_2, dq_mapping_3; +#endif const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; ulong ddr_freq; int slot; @@ -79,7 +81,7 @@ found: pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, pbsp->wrlvl_ctl_3); - +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (ctrl_num == CONFIG_DP_DDR_CTRL) { /* force DDR bus width to 32 bits */ popts->data_bus_width = 1; @@ -114,6 +116,7 @@ found: pdimm[slot].dq_mapping[16] = 0; pdimm[slot].dq_mapping[17] = 0; } +#endif /* To work at higher than 1333MT/s */ popts->half_strength_driver_enable = 0; /* diff --git a/board/freescale/ls2085aqds/ddr.h b/board/freescale/ls2080aqds/ddr.h similarity index 100% rename from board/freescale/ls2085aqds/ddr.h rename to board/freescale/ls2080aqds/ddr.h diff --git a/board/freescale/ls2085aqds/eth.c b/board/freescale/ls2080aqds/eth.c similarity index 88% rename from board/freescale/ls2085aqds/eth.c rename to board/freescale/ls2080aqds/eth.c index d116cd51db..0637ecf2a7 100644 --- a/board/freescale/ls2085aqds/eth.c +++ b/board/freescale/ls2080aqds/eth.c @@ -18,16 +18,16 @@ #include "../common/qixis.h" -#include "ls2085aqds_qixis.h" +#include "ls2080aqds_qixis.h" #ifdef CONFIG_FSL_MC_ENET - /* - In LS2085A there are only 16 SERDES lanes, spread across 2 SERDES banks. + /* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks. * Bank 1 -> Lanes A, B, C, D, E, F, G, H * Bank 2 -> Lanes A,B, C, D, E, F, G, H */ - /* Mapping of 16 SERDES lanes to LS2085A QDS board slots. A value of '0' here + /* Mapping of 16 SERDES lanes to LS2080A QDS board slots. A value of '0' here * means that the mapping must be determined dynamically, or that the lane * maps to something other than a board slot. */ @@ -74,16 +74,16 @@ static int sgmii_riser_phy_addr[] = { #define SFP_TX 0 static const char * const mdio_names[] = { - "LS2085A_QDS_MDIO0", - "LS2085A_QDS_MDIO1", - "LS2085A_QDS_MDIO2", - "LS2085A_QDS_MDIO3", - "LS2085A_QDS_MDIO4", - "LS2085A_QDS_MDIO5", + "LS2080A_QDS_MDIO0", + "LS2080A_QDS_MDIO1", + "LS2080A_QDS_MDIO2", + "LS2080A_QDS_MDIO3", + "LS2080A_QDS_MDIO4", + "LS2080A_QDS_MDIO5", DEFAULT_WRIOP_MDIO2_NAME, }; -struct ls2085a_qds_mdio { +struct ls2080a_qds_mdio { u8 muxval; struct mii_dev *realbus; }; @@ -95,7 +95,7 @@ static void sgmii_configure_repeater(int serdes_port) int i, j, ret; int dpmac_id = 0, dpmac, mii_bus = 0; unsigned short value; - char dev[2][20] = {"LS2085A_QDS_MDIO0", "LS2085A_QDS_MDIO3"}; + char dev[2][20] = {"LS2080A_QDS_MDIO0", "LS2080A_QDS_MDIO3"}; uint8_t i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5f, 0x60}; uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7}; @@ -222,7 +222,7 @@ static void qsgmii_configure_repeater(int dpmac) uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7}; uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84}; - const char *dev = "LS2085A_QDS_MDIO0"; + const char *dev = "LS2080A_QDS_MDIO0"; int ret = 0; unsigned short value; @@ -318,7 +318,7 @@ error: return; } -static const char *ls2085a_qds_mdio_name_for_muxval(u8 muxval) +static const char *ls2080a_qds_mdio_name_for_muxval(u8 muxval) { return mdio_names[muxval]; } @@ -326,7 +326,7 @@ static const char *ls2085a_qds_mdio_name_for_muxval(u8 muxval) struct mii_dev *mii_dev_for_muxval(u8 muxval) { struct mii_dev *bus; - const char *name = ls2085a_qds_mdio_name_for_muxval(muxval); + const char *name = ls2080a_qds_mdio_name_for_muxval(muxval); if (!name) { printf("No bus for muxval %x\n", muxval); @@ -343,7 +343,7 @@ struct mii_dev *mii_dev_for_muxval(u8 muxval) return bus; } -static void ls2085a_qds_enable_SFP_TX(u8 muxval) +static void ls2080a_qds_enable_SFP_TX(u8 muxval) { u8 brdcfg9; @@ -353,7 +353,7 @@ static void ls2085a_qds_enable_SFP_TX(u8 muxval) QIXIS_WRITE(brdcfg[9], brdcfg9); } -static void ls2085a_qds_mux_mdio(u8 muxval) +static void ls2080a_qds_mux_mdio(u8 muxval) { u8 brdcfg4; @@ -365,54 +365,54 @@ static void ls2085a_qds_mux_mdio(u8 muxval) } } -static int ls2085a_qds_mdio_read(struct mii_dev *bus, int addr, +static int ls2080a_qds_mdio_read(struct mii_dev *bus, int addr, int devad, int regnum) { - struct ls2085a_qds_mdio *priv = bus->priv; + struct ls2080a_qds_mdio *priv = bus->priv; - ls2085a_qds_mux_mdio(priv->muxval); + ls2080a_qds_mux_mdio(priv->muxval); return priv->realbus->read(priv->realbus, addr, devad, regnum); } -static int ls2085a_qds_mdio_write(struct mii_dev *bus, int addr, int devad, +static int ls2080a_qds_mdio_write(struct mii_dev *bus, int addr, int devad, int regnum, u16 value) { - struct ls2085a_qds_mdio *priv = bus->priv; + struct ls2080a_qds_mdio *priv = bus->priv; - ls2085a_qds_mux_mdio(priv->muxval); + ls2080a_qds_mux_mdio(priv->muxval); return priv->realbus->write(priv->realbus, addr, devad, regnum, value); } -static int ls2085a_qds_mdio_reset(struct mii_dev *bus) +static int ls2080a_qds_mdio_reset(struct mii_dev *bus) { - struct ls2085a_qds_mdio *priv = bus->priv; + struct ls2080a_qds_mdio *priv = bus->priv; return priv->realbus->reset(priv->realbus); } -static int ls2085a_qds_mdio_init(char *realbusname, u8 muxval) +static int ls2080a_qds_mdio_init(char *realbusname, u8 muxval) { - struct ls2085a_qds_mdio *pmdio; + struct ls2080a_qds_mdio *pmdio; struct mii_dev *bus = mdio_alloc(); if (!bus) { - printf("Failed to allocate ls2085a_qds MDIO bus\n"); + printf("Failed to allocate ls2080a_qds MDIO bus\n"); return -1; } pmdio = malloc(sizeof(*pmdio)); if (!pmdio) { - printf("Failed to allocate ls2085a_qds private data\n"); + printf("Failed to allocate ls2080a_qds private data\n"); free(bus); return -1; } - bus->read = ls2085a_qds_mdio_read; - bus->write = ls2085a_qds_mdio_write; - bus->reset = ls2085a_qds_mdio_reset; - sprintf(bus->name, ls2085a_qds_mdio_name_for_muxval(muxval)); + bus->read = ls2080a_qds_mdio_read; + bus->write = ls2080a_qds_mdio_write; + bus->reset = ls2080a_qds_mdio_reset; + sprintf(bus->name, ls2080a_qds_mdio_name_for_muxval(muxval)); pmdio->realbus = miiphy_get_dev_by_name(realbusname); @@ -511,7 +511,7 @@ static void initialize_dpmac_to_slot(void) } } -void ls2085a_handle_phy_interface_sgmii(int dpmac_id) +void ls2080a_handle_phy_interface_sgmii(int dpmac_id) { int lane, slot; struct mii_dev *bus; @@ -632,7 +632,7 @@ serdes2: } } -void ls2085a_handle_phy_interface_qsgmii(int dpmac_id) +void ls2080a_handle_phy_interface_qsgmii(int dpmac_id) { int lane = 0, slot; struct mii_dev *bus; @@ -706,7 +706,7 @@ void ls2085a_handle_phy_interface_qsgmii(int dpmac_id) qsgmii_configure_repeater(dpmac_id); } -void ls2085a_handle_phy_interface_xsgmii(int i) +void ls2080a_handle_phy_interface_xsgmii(int i) { struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) & @@ -725,7 +725,7 @@ void ls2085a_handle_phy_interface_xsgmii(int i) * error. */ wriop_set_phy_address(i, i + 4); - ls2085a_qds_enable_SFP_TX(SFP_TX); + ls2080a_qds_enable_SFP_TX(SFP_TX); break; default: @@ -778,25 +778,25 @@ int board_eth_init(bd_t *bis) fm_memac_mdio_init(bis, memac_mdio1_info); /* Register the muxing front-ends to the MDIO buses */ - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT2); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT3); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT4); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT5); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT6); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT2); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT3); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT4); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT5); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT6); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO2_NAME, EMI2); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO2_NAME, EMI2); for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) { switch (wriop_get_enet_if(i)) { case PHY_INTERFACE_MODE_QSGMII: - ls2085a_handle_phy_interface_qsgmii(i); + ls2080a_handle_phy_interface_qsgmii(i); break; case PHY_INTERFACE_MODE_SGMII: - ls2085a_handle_phy_interface_sgmii(i); + ls2080a_handle_phy_interface_sgmii(i); break; case PHY_INTERFACE_MODE_XGMII: - ls2085a_handle_phy_interface_xsgmii(i); + ls2080a_handle_phy_interface_xsgmii(i); break; default: break; diff --git a/board/freescale/ls2085aqds/ls2085aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c similarity index 98% rename from board/freescale/ls2085aqds/ls2085aqds.c rename to board/freescale/ls2080aqds/ls2080aqds.c index 36b059fcc5..1f990720a8 100644 --- a/board/freescale/ls2085aqds/ls2085aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -21,7 +21,7 @@ #include #include "../common/qixis.h" -#include "ls2085aqds_qixis.h" +#include "ls2080aqds_qixis.h" #define PIN_MUX_SEL_SDHC 0x00 #define PIN_MUX_SEL_DSPI 0x0a @@ -226,11 +226,13 @@ void detail_board_ddr_info(void) puts("\nDDR "); print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); print_ddr_info(0); +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (gd->bd->bi_dram[2].size) { puts("\nDP-DDR "); print_size(gd->bd->bi_dram[2].size, ""); print_ddr_info(CONFIG_DP_DDR_CTRL); } +#endif } int dram_init(void) diff --git a/board/freescale/ls2085aqds/ls2085aqds_qixis.h b/board/freescale/ls2080aqds/ls2080aqds_qixis.h similarity index 100% rename from board/freescale/ls2085aqds/ls2085aqds_qixis.h rename to board/freescale/ls2080aqds/ls2080aqds_qixis.h diff --git a/board/freescale/ls2085aqds/Kconfig b/board/freescale/ls2080ardb/Kconfig similarity index 67% rename from board/freescale/ls2085aqds/Kconfig rename to board/freescale/ls2080ardb/Kconfig index 8d6acbac93..fe02575cf9 100644 --- a/board/freescale/ls2085aqds/Kconfig +++ b/board/freescale/ls2080ardb/Kconfig @@ -1,8 +1,8 @@ -if TARGET_LS2085AQDS +if TARGET_LS2080ARDB config SYS_BOARD - default "ls2085aqds" + default "ls2080ardb" config SYS_VENDOR default "freescale" @@ -11,6 +11,6 @@ config SYS_SOC default "fsl-layerscape" config SYS_CONFIG_NAME - default "ls2085aqds" + default "ls2080ardb" endif diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS new file mode 100644 index 0000000000..aac81104db --- /dev/null +++ b/board/freescale/ls2080ardb/MAINTAINERS @@ -0,0 +1,8 @@ +LS2080A BOARD +M: Prabhakar Kushwaha +S: Maintained +F: board/freescale/ls2080ardb/ +F: board/freescale/ls2080a/ls2080ardb.c +F: include/configs/ls2080ardb.h +F: configs/ls2080ardb_defconfig +F: configs/ls2080ardb_nand_defconfig diff --git a/board/freescale/ls2085ardb/Makefile b/board/freescale/ls2080ardb/Makefile similarity index 72% rename from board/freescale/ls2085ardb/Makefile rename to board/freescale/ls2080ardb/Makefile index de383ccc0f..6a52167be1 100644 --- a/board/freescale/ls2085ardb/Makefile +++ b/board/freescale/ls2080ardb/Makefile @@ -4,5 +4,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += ls2085ardb.o eth_ls2085rdb.o +obj-y += ls2080ardb.o eth_ls2080rdb.o obj-y += ddr.o diff --git a/board/freescale/ls2085ardb/README b/board/freescale/ls2080ardb/README similarity index 94% rename from board/freescale/ls2085ardb/README rename to board/freescale/ls2080ardb/README index 2f18243a8b..7fc2569648 100644 --- a/board/freescale/ls2085ardb/README +++ b/board/freescale/ls2080ardb/README @@ -1,17 +1,17 @@ Overview -------- -The LS2085A Reference Design (RDB) is a high-performance computing, -evaluation, and development platform that supports the QorIQ LS2085A +The LS2080A Reference Design (RDB) is a high-performance computing, +evaluation, and development platform that supports the QorIQ LS2080A Layerscape Architecture processor. -LS2085A SoC Overview +LS2080A SoC Overview ------------------ -The LS2085A integrated multicore processor combines eight ARM Cortex-A57 +The LS2080A integrated multicore processor combines eight ARM Cortex-A57 processor cores with high-performance data path acceleration logic and network and peripheral bus interfaces required for networking, telecom/datacom, wireless infrastructure, and mil/aerospace applications. -The LS2085A SoC includes the following function and features: +The LS2080A SoC includes the following function and features: - Eight 64-bit ARM Cortex-A57 CPUs - 1 MB platform cache with ECC @@ -48,7 +48,7 @@ The LS2085A SoC includes the following function and features: - Service processor (SP) provides pre-boot initialization and secure-boot capabilities - LS2085ARDB board Overview + LS2080ARDB board Overview ----------------------- - SERDES Connections, 16 lanes supporting: - PCI Express - 3.0 diff --git a/board/freescale/ls2085aqds/ddr.c b/board/freescale/ls2080ardb/ddr.c similarity index 98% rename from board/freescale/ls2085aqds/ddr.c rename to board/freescale/ls2080ardb/ddr.c index 8d71ae1264..ae681de35e 100644 --- a/board/freescale/ls2085aqds/ddr.c +++ b/board/freescale/ls2080ardb/ddr.c @@ -15,7 +15,9 @@ void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) { +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR u8 dq_mapping_0, dq_mapping_2, dq_mapping_3; +#endif const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; ulong ddr_freq; int slot; @@ -79,7 +81,7 @@ found: pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, pbsp->wrlvl_ctl_3); - +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (ctrl_num == CONFIG_DP_DDR_CTRL) { /* force DDR bus width to 32 bits */ popts->data_bus_width = 1; @@ -114,6 +116,7 @@ found: pdimm[slot].dq_mapping[16] = 0; pdimm[slot].dq_mapping[17] = 0; } +#endif /* To work at higher than 1333MT/s */ popts->half_strength_driver_enable = 0; /* diff --git a/board/freescale/ls2085ardb/ddr.h b/board/freescale/ls2080ardb/ddr.h similarity index 100% rename from board/freescale/ls2085ardb/ddr.h rename to board/freescale/ls2080ardb/ddr.h diff --git a/board/freescale/ls2085ardb/eth_ls2085rdb.c b/board/freescale/ls2080ardb/eth_ls2080rdb.c similarity index 98% rename from board/freescale/ls2085ardb/eth_ls2085rdb.c rename to board/freescale/ls2080ardb/eth_ls2080rdb.c index d578757dfd..db50e4efa9 100644 --- a/board/freescale/ls2085ardb/eth_ls2085rdb.c +++ b/board/freescale/ls2080ardb/eth_ls2080rdb.c @@ -97,7 +97,7 @@ int board_eth_init(bd_t *bis) break; default: - printf("SerDes1 protocol 0x%x is not supported on LS2085aRDB\n", + printf("SerDes1 protocol 0x%x is not supported on LS2080aRDB\n", srds_s1); break; } diff --git a/board/freescale/ls2085ardb/ls2085ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c similarity index 98% rename from board/freescale/ls2085ardb/ls2085ardb.c rename to board/freescale/ls2080ardb/ls2080ardb.c index 761d7c877d..2ae9d6cf45 100644 --- a/board/freescale/ls2085ardb/ls2085ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -20,7 +20,7 @@ #include #include "../common/qixis.h" -#include "ls2085ardb_qixis.h" +#include "ls2080ardb_qixis.h" #define PIN_MUX_SEL_SDHC 0x00 #define PIN_MUX_SEL_DSPI 0x0a @@ -192,11 +192,13 @@ void detail_board_ddr_info(void) puts("\nDDR "); print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); print_ddr_info(0); +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (gd->bd->bi_dram[2].size) { puts("\nDP-DDR "); print_size(gd->bd->bi_dram[2].size, ""); print_ddr_info(CONFIG_DP_DDR_CTRL); } +#endif } int dram_init(void) diff --git a/board/freescale/ls2085ardb/ls2085ardb_qixis.h b/board/freescale/ls2080ardb/ls2080ardb_qixis.h similarity index 100% rename from board/freescale/ls2085ardb/ls2085ardb_qixis.h rename to board/freescale/ls2080ardb/ls2080ardb_qixis.h diff --git a/board/freescale/ls2085a/MAINTAINERS b/board/freescale/ls2085a/MAINTAINERS deleted file mode 100644 index 90b4e4715d..0000000000 --- a/board/freescale/ls2085a/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -LS2085A BOARD -M: York Sun -S: Maintained -F: board/freescale/ls2085a/ -F: include/configs/ls2085a_emu.h -F: configs/ls2085a_emu_defconfig -F: include/configs/ls2085a_simu.h -F: configs/ls2085a_simu_defconfig diff --git a/board/freescale/ls2085a/Makefile b/board/freescale/ls2085a/Makefile deleted file mode 100644 index 701b35cd59..0000000000 --- a/board/freescale/ls2085a/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2014 Freescale Semiconductor -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += ls2085a.o -obj-y += ddr.o diff --git a/board/freescale/ls2085aqds/MAINTAINERS b/board/freescale/ls2085aqds/MAINTAINERS deleted file mode 100644 index fbed672601..0000000000 --- a/board/freescale/ls2085aqds/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -LS2085A BOARD -M: Prabhakar Kushwaha -S: Maintained -F: board/freescale/ls2085aqds/ -F: board/freescale/ls2085a/ls2085aqds.c -F: include/configs/ls2085aqds.h -F: configs/ls2085aqds_defconfig -F: configs/ls2085aqds_nand_defconfig diff --git a/board/freescale/ls2085ardb/MAINTAINERS b/board/freescale/ls2085ardb/MAINTAINERS deleted file mode 100644 index d5cce40b21..0000000000 --- a/board/freescale/ls2085ardb/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -LS2085A BOARD -M: Prabhakar Kushwaha -S: Maintained -F: board/freescale/ls2085ardb/ -F: board/freescale/ls2085a/ls2085ardb.c -F: include/configs/ls2085ardb.h -F: configs/ls2085ardb_defconfig -F: configs/ls2085ardb_nand_defconfig diff --git a/configs/ls2085a_emu_defconfig b/configs/ls2080a_emu_defconfig similarity index 93% rename from configs/ls2085a_emu_defconfig rename to configs/ls2080a_emu_defconfig index 0505d09f75..3ac9e4a8b8 100644 --- a/configs/ls2085a_emu_defconfig +++ b/configs/ls2080a_emu_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_TARGET_LS2085A_EMU=y +CONFIG_TARGET_LS2080A_EMU=y CONFIG_SYS_EXTRA_OPTIONS="EMU,SYS_FSL_DDR4" # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/ls2085a_simu_defconfig b/configs/ls2080a_simu_defconfig similarity index 93% rename from configs/ls2085a_simu_defconfig rename to configs/ls2080a_simu_defconfig index 220a65a415..4421cf97ee 100644 --- a/configs/ls2085a_simu_defconfig +++ b/configs/ls2080a_simu_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_TARGET_LS2085A_SIMU=y +CONFIG_TARGET_LS2080A_SIMU=y CONFIG_SYS_EXTRA_OPTIONS="SIMU" # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMLS is not set diff --git a/configs/ls2085ardb_defconfig b/configs/ls2080aqds_defconfig similarity index 80% rename from configs/ls2085ardb_defconfig rename to configs/ls2080aqds_defconfig index 764e48f5f4..527ae0187a 100644 --- a/configs/ls2085ardb_defconfig +++ b/configs/ls2080aqds_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_TARGET_LS2085ARDB=y +CONFIG_TARGET_LS2080AQDS=y # CONFIG_SYS_MALLOC_F is not set CONFIG_DM_SPI=y CONFIG_DM_SPI_FLASH=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-rdb" +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y diff --git a/configs/ls2085aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig similarity index 87% rename from configs/ls2085aqds_nand_defconfig rename to configs/ls2080aqds_nand_defconfig index c010e58b1a..07c37942c5 100644 --- a/configs/ls2085aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_TARGET_LS2085AQDS=y +CONFIG_TARGET_LS2080AQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND" # CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls2085aqds_defconfig b/configs/ls2080ardb_defconfig similarity index 80% rename from configs/ls2085aqds_defconfig rename to configs/ls2080ardb_defconfig index 5b4f7ebdee..91769bc92f 100644 --- a/configs/ls2085aqds_defconfig +++ b/configs/ls2080ardb_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y -CONFIG_TARGET_LS2085AQDS=y +CONFIG_TARGET_LS2080ARDB=y # CONFIG_SYS_MALLOC_F is not set CONFIG_DM_SPI=y CONFIG_DM_SPI_FLASH=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-qds" +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb" CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y diff --git a/configs/ls2085ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig similarity index 87% rename from configs/ls2085ardb_nand_defconfig rename to configs/ls2080ardb_nand_defconfig index 76d4d34fcb..06c540b097 100644 --- a/configs/ls2085ardb_nand_defconfig +++ b/configs/ls2080ardb_nand_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_TARGET_LS2085ARDB=y +CONFIG_TARGET_LS2080ARDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND" # CONFIG_CMD_SETEXPR is not set diff --git a/doc/README.fsl-trustzone-components b/doc/README.fsl-trustzone-components index a3afd1f5f4..e1223469e3 100644 --- a/doc/README.fsl-trustzone-components +++ b/doc/README.fsl-trustzone-components @@ -1,4 +1,4 @@ -Freescale ARM64 SoCs like LS2085A have ARM TrustZone components like +Freescale ARM64 SoCs like LS2080A have ARM TrustZone components like TZPC-BP147 (TrustZone Protection Controller) and TZASC-400 (TrustZone Address Space Controller). @@ -7,7 +7,7 @@ is left to a root-of-trust security software layer (running in EL3 privilege mode), but still some configurations of these peripherals might be required while the bootloader is executing in EL3 privilege mode. The following sections define how to turn on these features for -LS2085A like SoCs. +LS2080A like SoCs. TZPC-BP147 (TrustZone Protection Controller) ============================================ diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c index 49e4688351..eefe709a47 100644 --- a/drivers/ddr/fsl/fsl_ddr_gen4.c +++ b/drivers/ddr/fsl/fsl_ddr_gen4.c @@ -107,14 +107,14 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, goto step2; #ifdef CONFIG_SYS_FSL_ERRATUM_A008336 -#ifdef CONFIG_LS2085A +#ifdef CONFIG_LS2080A /* A008336 only applies to general DDR controllers */ if ((ctrl_num == 0) || (ctrl_num == 1)) #endif ddr_out32(eddrtqcr1, 0x63b30002); #endif #ifdef CONFIG_SYS_FSL_ERRATUM_A008514 -#ifdef CONFIG_LS2085A +#ifdef CONFIG_LS2080A /* A008514 only applies to DP-DDR controler */ if (ctrl_num == 2) #endif diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index 5168b99455..e1a02d1f3d 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -1147,7 +1147,10 @@ static int do_fsl_mc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argv[1][0]) { case 's': { char sub_cmd; - u64 mc_fw_addr, mc_dpc_addr, aiop_fw_addr; + u64 mc_fw_addr, mc_dpc_addr; +#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET + u64 aiop_fw_addr; +#endif sub_cmd = argv[2][0]; switch (sub_cmd) { diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile index c37633f3ed..5587aa618d 100644 --- a/drivers/net/ldpaa_eth/Makefile +++ b/drivers/net/ldpaa_eth/Makefile @@ -6,4 +6,4 @@ obj-y += ldpaa_wriop.o obj-y += ldpaa_eth.o -obj-$(CONFIG_LS2085A) += ls2085a.o +obj-$(CONFIG_LS2080A) += ls2080a.o diff --git a/drivers/net/ldpaa_eth/ls2085a.c b/drivers/net/ldpaa_eth/ls2080a.c similarity index 100% rename from drivers/net/ldpaa_eth/ls2085a.c rename to drivers/net/ldpaa_eth/ls2080a.c diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c index 4cee038ede..8af6531767 100644 --- a/drivers/pci/pcie_layerscape.c +++ b/drivers/pci/pcie_layerscape.c @@ -665,7 +665,7 @@ void ft_pci_setup(void *blob, bd_t *bd) } #endif -#ifdef CONFIG_LS2085A +#ifdef CONFIG_LS2080A void pcie_set_available_streamids(void *blob, const char *pcie_path, u32 *stream_ids, int count) diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2080a_common.h similarity index 98% rename from include/configs/ls2085a_common.h rename to include/configs/ls2080a_common.h index f9bca44f6f..d15a2251ad 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2080a_common.h @@ -11,7 +11,7 @@ #define CONFIG_REMAKE_ELF #define CONFIG_FSL_LAYERSCAPE #define CONFIG_FSL_LSCH3 -#define CONFIG_LS2085A +#define CONFIG_LS2080A #define CONFIG_MP #define CONFIG_GICV3 #define CONFIG_FSL_TZPC_BP147 @@ -20,7 +20,7 @@ #define CONFIG_ARM_ERRATA_828024 #define CONFIG_ARM_ERRATA_826974 -#include +#include #include #if (defined(CONFIG_SYS_FSL_SRDS_1) || defined(CONFIG_SYS_FSL_SRDS_2)) #define CONFIG_SYS_HAS_SERDES @@ -80,6 +80,7 @@ #define CPU_RELEASE_ADDR secondary_boot_func #define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR #define CONFIG_SYS_DP_DDR_BASE 0x6000000000ULL /* * DDR controller use 0 as the base address for binding. @@ -88,6 +89,7 @@ #define CONFIG_SYS_DP_DDR_BASE_PHY 0 #define CONFIG_DP_DDR_CTRL 2 #define CONFIG_DP_DDR_NUM_CTRLS 1 +#endif /* Generic Timer Definitions */ /* @@ -182,8 +184,10 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 +#ifndef CONFIG_LS2080A #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 +#endif /* * Carve out a DDR region which will not be used by u-boot/Linux @@ -204,7 +208,7 @@ unsigned long long get_qixis_addr(void); #define CONFIG_PCIE3 /* PCIE controler 3 */ #define CONFIG_PCIE4 /* PCIE controler 4 */ #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ -#define FSL_PCIE_COMPAT "fsl,ls2085a-pcie" +#define FSL_PCIE_COMPAT "fsl,ls2080a-pcie" #define CONFIG_SYS_PCI_64BIT diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2080a_emu.h similarity index 94% rename from include/configs/ls2085a_emu.h rename to include/configs/ls2080a_emu.h index 2d68e1bf7e..6400f4f355 100644 --- a/include/configs/ls2085a_emu.h +++ b/include/configs/ls2080a_emu.h @@ -7,10 +7,10 @@ #ifndef __LS2_EMU_H #define __LS2_EMU_H -#include "ls2085a_common.h" +#include "ls2080a_common.h" -#define CONFIG_IDENT_STRING " LS2085A-EMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU" +#define CONFIG_IDENT_STRING " LS2080A-EMU" +#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2080A-EMU" #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 133333333 @@ -27,7 +27,9 @@ #define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 +#endif #define CONFIG_FSL_DDR_SYNC_REFRESH diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2080a_simu.h similarity index 96% rename from include/configs/ls2085a_simu.h rename to include/configs/ls2080a_simu.h index bd15b3d624..666df8021c 100644 --- a/include/configs/ls2085a_simu.h +++ b/include/configs/ls2080a_simu.h @@ -7,10 +7,10 @@ #ifndef __LS2_SIMU_H #define __LS2_SIMU_H -#include "ls2085a_common.h" +#include "ls2080a_common.h" -#define CONFIG_IDENT_STRING " LS2085A-SIMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-SIMU" +#define CONFIG_IDENT_STRING " LS2080A-SIMU" +#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2080A-SIMU" #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 133333333 @@ -20,7 +20,9 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 +#endif /* SMSC 91C111 ethernet configuration */ #define CONFIG_SMC91111 diff --git a/include/configs/ls2085aqds.h b/include/configs/ls2080aqds.h similarity index 99% rename from include/configs/ls2085aqds.h rename to include/configs/ls2080aqds.h index b3cf113179..54bcae9fe8 100644 --- a/include/configs/ls2085aqds.h +++ b/include/configs/ls2080aqds.h @@ -7,7 +7,7 @@ #ifndef __LS2_QDS_H #define __LS2_QDS_H -#include "ls2085a_common.h" +#include "ls2080a_common.h" #define CONFIG_DISPLAY_BOARDINFO @@ -35,7 +35,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ #define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 +#endif #define CONFIG_FSL_DDR_BIST /* enable built-in memory test */ /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */ diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2080ardb.h similarity index 99% rename from include/configs/ls2085ardb.h rename to include/configs/ls2080ardb.h index b85dbbe13c..44a47d5889 100644 --- a/include/configs/ls2085ardb.h +++ b/include/configs/ls2080ardb.h @@ -7,7 +7,7 @@ #ifndef __LS2_RDB_H #define __LS2_RDB_H -#include "ls2085a_common.h" +#include "ls2080a_common.h" #undef CONFIG_CONS_INDEX #define CONFIG_CONS_INDEX 2 @@ -37,7 +37,9 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ #define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 +#endif #define CONFIG_FSL_DDR_BIST /* enable built-in memory test */ /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */ diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h index 602a413ccb..80b7718a99 100644 --- a/include/linux/usb/xhci-fsl.h +++ b/include/linux/usb/xhci-fsl.h @@ -54,9 +54,9 @@ struct fsl_xhci { #if defined(CONFIG_LS102XA) #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS102XA_XHCI_USB1_ADDR #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0 -#elif defined(CONFIG_LS2085A) -#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2085A_XHCI_USB1_ADDR -#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2085A_XHCI_USB2_ADDR +#elif defined(CONFIG_LS2080A) +#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR +#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR #endif #define FSL_USB_XHCI_ADDR {CONFIG_SYS_FSL_XHCI_USB1_ADDR, \